csteenwyk Posted April 15, 2022 Posted April 15, 2022 I have two hubs manually defined in the config that aren't being detected. It's almost as if the config isn't being read in from PG3. Any ideas?
Jimbo.Automates Posted April 15, 2022 Posted April 15, 2022 Any errors in the log?Did you enable XMPP as desc in the readme?What do your configuration parameters look like?If still necessary PM me the log package.Sent from my Pixel 6 Pro using Tapatalk
DWeintraub Posted July 1, 2022 Posted July 1, 2022 (edited) I have the same problem. I DID enable XMPP. LOG; 2022-07-01 16:02:14,662 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message stop 2022-07-01 16:02:14,663 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING stop 2022-07-01 16:02:14,664 Command udi_interface.interface INFO interface:_handleInput: Received stop from Polyglot... Shutting Down. 2022-07-01 16:02:14,666 Thread-90 udi_interface WARNING Controller:handler_stop: Stopping... 2022-07-01 16:02:14,667 Thread-90 udi_interface.interface INFO interface:stop: Disconnecting from MQTT... localhost:1888 2022-07-01 16:02:14,668 Thread-90 udi_interface.interface INFO interface:_disconnect: MQTT Graceful disconnection. 2022-07-01 16:02:14,669 MQTT udi_interface.interface DEBUG interface:_startMqtt: MQTT: Done 2022-07-01 16:02:22,210 MainThread udi_interface INFO polylogger:set_basic_config: set_basic_config: enable=True level=30 2022-07-01 16:02:24,759 MainThread udi_interface INFO __init__:<module>: UDI Python Interface for Polyglot version 3 3.0.41 Starting... 2022-07-01 16:02:25,240 MainThread udi_interface.interface INFO interface:__init__: Initialization received from Polyglot V3 3.0.59 [ISY: 5.4.4, Slot: 4] 2022-07-01 16:02:25,242 MainThread udi_interface.interface INFO interface:__init__: Connect: Network Interface: {'addr': '192.168.1.18', 'netmask': '255.255.255.0', 'broadcast': '192.168.1.255'} 2022-07-01 16:02:25,244 Interface udi_interface.interface INFO interface:_startMqtt: Connecting to MQTT... localhost:1888 2022-07-01 16:02:25,251 MainThread udi_interface.interface INFO interface:updateProfile: Sending Install Profile command to Polyglot. 2022-07-01 16:02:25,252 MainThread udi_interface.interface WARNING interface:send: MQTT Send waiting on connection :: {'installprofile': {'reboot': False}} 2022-07-01 16:02:25,306 MQTT udi_interface.interface INFO interface:_connect: MQTT Connected with result code 0 (Success) 2022-07-01 16:02:25,308 MQTT udi_interface.interface INFO interface:_connect: MQTT Subscribing to topic: udi/pg3/ns/clients/00:0d:b9:56:0c:60_4 - MID: 1 Result: 0 2022-07-01 16:02:25,324 MQTT udi_interface.interface INFO interface:_subscribe: MQTT Subscribed Succesfully for Message ID: 1 - QoS: (0,) 2022-07-01 16:02:25,431 MQTT udi_interface.interface INFO interface:_message: Successfully set harmonyctrl :: ST to 1 UOM 25 2022-07-01 16:02:28,269 MainThread udi_interface INFO Controller:__init__: HarmonyController: Initializing 2022-07-01 16:02:28,271 MainThread udi_interface.interface WARNING interface:db_getNodeDrivers: harmonyctrl not found in database. 2022-07-01 16:02:28,274 MainThread udi_interface.interface INFO interface:addNode: Adding node HarmonyHub Controller(harmonyctrl) [None] 2022-07-01 16:02:28,276 MainThread udi_interface.interface INFO interface:setController: Using node "harmonyctrl", driver "ST" for connection status. 2022-07-01 16:02:28,451 MQTT udi_interface.interface INFO interface:_message: custom data response {'customparamsdoc': ''} 2022-07-01 16:02:28,539 MQTT udi_interface.interface INFO interface:_message: Successfully set key = customparamsdoc 2022-07-01 16:02:28,586 Thread-1 udi_interface INFO Controller:handler_log_level: enter: level={'name': 'DEBUG_MODULES', 'level': 9} 2022-07-01 16:02:28,588 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message getAll 2022-07-01 16:02:28,589 Thread-1 udi_interface INFO Controller:handler_log_level: Setting basic config to DEBUG... 2022-07-01 16:02:28,590 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING getAll 2022-07-01 16:02:28,594 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message getNsInfo 2022-07-01 16:02:28,596 Thread-1 udi_interface INFO Controller:handler_log_level: exit: slevel=10 2022-07-01 16:02:28,599 Thread-2 udi_interface DEBUG Controller:handler_params: enter: Loading {'clear_hubs': '0', 'hub_uniqueid': ' { "name": "HarmonyHub Theater", "host": "192.168.1.159" }'} 2022-07-01 16:02:28,599 Command udi_interface.custom DEBUG custom:load: CUSTOM: load {'profile_version': '3.0.1'} 2022-07-01 16:02:28,602 Thread-2 udi_interface.custom DEBUG custom:load: CUSTOM: load {'clear_hubs': '0', 'hub_uniqueid': ' { "name": "HarmonyHub Theater", "host": "192.168.1.159" }'} 2022-07-01 16:02:28,603 Command udi_interface.custom DEBUG custom:load: CUSTOM: -- checking profile_version / 3.0.1 2022-07-01 16:02:28,604 Thread-2 udi_interface.custom DEBUG custom:load: CUSTOM: -- checking clear_hubs / 0 2022-07-01 16:02:28,605 Command udi_interface.custom DEBUG custom:load: CUSTOM: load {'purge': 'Nothing to purge'} 2022-07-01 16:02:28,606 Thread-2 udi_interface.custom DEBUG custom:load: CUSTOM: -- checking hub_uniqueid / { "name": "HarmonyHub Theater", "host": "192.168.1.159" } 2022-07-01 16:02:28,606 Command udi_interface.custom DEBUG custom:load: CUSTOM: -- checking purge / Nothing to purge 2022-07-01 16:02:28,607 Thread-2 udi_interface.custom DEBUG custom:clear: CUSTOM: Clear ...saving 2022-07-01 16:02:28,608 Command udi_interface.interface DEBUG interface:_handleInput: Key nsdata should be passed to node server. 2022-07-01 16:02:28,609 Thread-2 udi_interface.custom INFO custom:_save: Sending data notices to Polyglot. 2022-07-01 16:02:28,610 Command udi_interface.interface DEBUG interface:_handleInput: Key oauth should be passed to node server. 2022-07-01 16:02:28,611 Thread-2 udi_interface.interface DEBUG interface:send: PUBLISHING {'set': [{'key': 'notices', 'value': {'purge': 'Nothing to purge'}}]} 2022-07-01 16:02:28,613 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING getNsInfo 2022-07-01 16:02:28,615 Thread-2 udi_interface DEBUG Controller:handler_params: exit: config_st=True 2022-07-01 16:02:28,638 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message setController 2022-07-01 16:02:28,639 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING setController 2022-07-01 16:02:28,640 Command udi_interface.interface DEBUG interface:_handleInput: connection status node/driver update 2022-07-01 16:02:28,715 Thread-4 udi_interface INFO Controller:handler_config_done: enter 2022-07-01 16:02:28,717 Thread-4 udi_interface.interface DEBUG interface:addLogLevel: Sending message {'setLogList': {'levels': [{'id': 5, 'name': 'Debug + Modules', 'value': 'DEBUG_MODULES', 'level': 9}, {'id': 4, 'name': 'Debug', 'value': 'DEBUG', 'level': 10}, {'id': 3, 'name': 'Info', 'value': 'INFO', 'level': 20}, {'id': 2, 'name': 'Warning', 'value': 'WARNING', 'level': 30}, {'id': 1, 'name': 'Error', 'value': 'ERROR', 'level': 40}, {'id': 0, 'name': 'Critical', 'value': 'CRITICAL', 'level': 50}]}} 2022-07-01 16:02:28,719 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message notices 2022-07-01 16:02:28,720 Thread-4 udi_interface.interface DEBUG interface:send: PUBLISHING {'setLogList': {'levels': [{'id': 5, 'name': 'Debug + Modules', 'value': 'DEBUG_MODULES', 'level': 9}, {'id': 4, 'name': 'Debug', 'value': 'DEBUG', 'level': 10}, {'id': 3, 'name': 'Info', 'value': 'INFO', 'level': 20}, {'id': 2, 'name': 'Warning', 'value': 'WARNING', 'level': 30}, {'id': 1, 'name': 'Error', 'value': 'ERROR', 'level': 40}, {'id': 0, 'name': 'Critical', 'value': 'CRITICAL', 'level': 50}]}} 2022-07-01 16:02:28,721 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING notices 2022-07-01 16:02:28,724 Thread-4 udi_interface INFO Controller:_set_num_hubs: 0 2022-07-01 16:02:28,725 Command udi_interface.custom DEBUG custom:load: CUSTOM: load {'purge': 'Nothing to purge'} 2022-07-01 16:02:28,726 Thread-4 udi_interface.node DEBUG node:setDriver: harmonyctrl:HarmonyHub Controller Reporting set GV3 to 0 to Polyglot 2022-07-01 16:02:28,727 Command udi_interface.custom DEBUG custom:load: CUSTOM: -- checking purge / Nothing to purge 2022-07-01 16:02:28,728 Thread-4 udi_interface.node DEBUG node:reportDriver: Updating value to 0 2022-07-01 16:02:28,729 Thread-4 udi_interface.interface DEBUG interface:send: PUBLISHING {'set': [{'address': 'harmonyctrl', 'driver': 'GV3', 'value': '0', 'uom': 25}]} 2022-07-01 16:02:28,731 Thread-4 udi_interface DEBUG harmony_hub_funcs:get_file: get_file: hubs.json = config/hubs.json 2022-07-01 16:02:28,733 Thread-4 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV10 - 1 :: getting dv GV10 2022-07-01 16:02:28,734 Thread-4 udi_interface DEBUG Controller:set_watch_mode: 1=True 2022-07-01 16:02:28,735 Thread-4 udi_interface.node DEBUG node:setDriver: harmonyctrl:HarmonyHub Controller No change in GV10's value 2022-07-01 16:02:28,735 Thread-4 udi_interface INFO Controller:_set_num_hubs: 0 2022-07-01 16:02:28,736 Thread-4 udi_interface.node DEBUG node:setDriver: harmonyctrl:HarmonyHub Controller No change in GV3's value 2022-07-01 16:02:28,737 Thread-4 udi_interface INFO Controller:handler_config_done: Adding known hubs... 2022-07-01 16:02:28,738 Thread-4 udi_interface DEBUG harmony_hub_funcs:get_file: get_file: config.yaml = config/config.yaml 2022-07-01 16:02:28,738 Thread-4 udi_interface INFO harmony_hub_funcs:load_config_file: load_config: Loading Harmony config config/config.yaml 2022-07-01 16:02:28,763 MQTT udi_interface.interface INFO interface:_message: Successfully set key = notices 2022-07-01 16:02:28,764 Thread-4 udi_interface DEBUG harmony_hub_funcs:get_file: get_file: hubs.json = config/hubs.json 2022-07-01 16:02:28,767 Thread-4 udi_interface.interface DEBUG interface:checkProfile: check_profile: force={'name': 'HarmonyHub', 'docs': 'https://github.com/UniversalDevicesInc-PG3/udi-harmony-poly/blob/master/README.md', 'type': 'python3', 'executable': 'harmony_hub.py', 'install': 'install.sh', 'description': "Connect Harmony Hub's to the ISY994", 'notice': 'Your disclaimer here', 'shortPoll': '60', 'longPoll': '300', 'logLevel': 'DEBUG', 'profile_version': '3.0.1', 'persist_folder': 'config', 'discover': True, 'customParams': {'clear_hubs': '0'}, 'credits': [{'title': 'udi-harmony-poly: A Node server for For Harmony Hub and ISY Integration', 'author': 'JimBoCA', 'version': '3.0.8', 'date': 'December 29, 2017', 'source': 'https://github.com/UniversalDevicesInc-PG3/udi-harmony-poly', 'license': 'https://github.com/UniversalDevicesInc-PG3/udi-harmony-poly/blob/master/LICENSE'}, {'title': 'Library: pyharmony', 'author': 'Author: Ian Day', 'version': '1.0.12', 'date': '2016-11-26', 'source': 'https://github.com/iandday/pyharmony', 'license': 'BSD-3-Clause'}], 'version': '3.0.8'} build_profile=<bound method Controller._update_profile of <nodes.Controller.Controller object at 0x803279220>> 2022-07-01 16:02:28,767 Thread-4 udi_interface.interface DEBUG interface:checkProfile: check_profile: saved_version=3.0.1 2022-07-01 16:02:28,768 Thread-4 udi_interface.interface DEBUG interface:checkProfile: check_profile: profile_version=3.0.1 2022-07-01 16:02:28,769 Thread-4 udi_interface.interface WARNING interface:checkProfile: check_profile: Force is enabled. 2022-07-01 16:02:28,769 Thread-4 udi_interface.interface INFO interface:checkProfile: Building Profile... 2022-07-01 16:02:28,770 Thread-4 udi_interface.node DEBUG node:setDriver: harmonyctrl:HarmonyHub Controller Reporting set GV7 to 4 to Polyglot 2022-07-01 16:02:28,771 Thread-4 udi_interface.node DEBUG node:reportDriver: Updating value to 4 2022-07-01 16:02:28,771 Thread-4 udi_interface.interface DEBUG interface:send: PUBLISHING {'set': [{'address': 'harmonyctrl', 'driver': 'GV7', 'value': '4', 'uom': 25}]} 2022-07-01 16:02:28,774 Thread-4 udi_interface DEBUG harmony_hub_funcs:get_file: get_file: config.yaml = config/config.yaml 2022-07-01 16:02:28,775 Thread-4 udi_interface INFO write_profile:write_profile: Loading config: config.yaml 2022-07-01 16:02:28,776 Thread-4 udi_interface DEBUG harmony_hub_funcs:get_file: get_file: config.yaml = config/config.yaml 2022-07-01 16:02:28,777 Thread-4 udi_interface INFO harmony_hub_funcs:load_config_file: load_config: Loading Harmony config config/config.yaml 2022-07-01 16:02:28,799 Thread-4 udi_interface INFO write_profile:write_profile: Writing profile/nls/en_us.txt 2022-07-01 16:02:28,813 Thread-4 udi_interface INFO write_profile:write_profile: Writing profile/nodedef/custom.xml and profile/editor/custom.xml 2022-07-01 16:02:28,815 Thread-4 udi_interface ERROR write_profile:write_profile: Hub list is empty? 2022-07-01 16:02:28,816 Thread-4 udi_interface DEBUG harmony_hub_funcs:get_file: get_file: config.yaml = config/config.yaml 2022-07-01 16:02:28,828 Thread-4 udi_interface INFO write_profile:write_profile: done 2022-07-01 16:02:28,829 Thread-4 udi_interface DEBUG harmony_hub_funcs:get_file: get_file: config.yaml = config/config.yaml 2022-07-01 16:02:28,829 Thread-4 udi_interface INFO harmony_hub_funcs:load_config_file: load_config: Loading Harmony config config/config.yaml 2022-07-01 16:02:28,851 Thread-4 udi_interface.node DEBUG node:setDriver: harmonyctrl:HarmonyHub Controller Reporting set GV7 to 5 to Polyglot 2022-07-01 16:02:28,852 Thread-4 udi_interface.node DEBUG node:reportDriver: Updating value to 5 2022-07-01 16:02:28,853 Thread-4 udi_interface.interface DEBUG interface:send: PUBLISHING {'set': [{'address': 'harmonyctrl', 'driver': 'GV7', 'value': '5', 'uom': 25}]} 2022-07-01 16:02:28,854 Thread-4 udi_interface.interface INFO interface:updateProfile: Sending Install Profile command to Polyglot. 2022-07-01 16:02:28,855 Thread-4 udi_interface.interface DEBUG interface:send: PUBLISHING {'installprofile': {'reboot': False}} 2022-07-01 16:02:28,856 Thread-4 udi_interface.node DEBUG node:setDriver: harmonyctrl:HarmonyHub Controller Reporting set GV7 to 6 to Polyglot 2022-07-01 16:02:28,857 Thread-4 udi_interface.node DEBUG node:reportDriver: Updating value to 6 2022-07-01 16:02:28,858 Thread-4 udi_interface.interface DEBUG interface:send: PUBLISHING {'set': [{'address': 'harmonyctrl', 'driver': 'GV7', 'value': '6', 'uom': 25}]} 2022-07-01 16:02:28,859 Thread-4 udi_interface.interface INFO interface:updateProfile: Sending Install Profile command to Polyglot. 2022-07-01 16:02:28,860 Thread-4 udi_interface.interface DEBUG interface:send: PUBLISHING {'installprofile': {'reboot': False}} 2022-07-01 16:02:28,861 Thread-4 udi_interface.custom DEBUG custom:__setattr__: CUSTOM: profile_version = 3.0.1 ...saving 2022-07-01 16:02:28,861 Thread-4 udi_interface.custom INFO custom:_save: Sending data idata to Polyglot. 2022-07-01 16:02:28,862 Thread-4 udi_interface.interface DEBUG interface:send: PUBLISHING {'set': [{'key': 'idata', 'value': {'profile_version': '3.0.1'}}]} 2022-07-01 16:02:28,863 Thread-4 udi_interface INFO Controller:_set_num_hubs: 0 2022-07-01 16:02:28,864 Thread-4 udi_interface.node DEBUG node:setDriver: harmonyctrl:HarmonyHub Controller No change in GV3's value 2022-07-01 16:02:28,865 Thread-4 udi_interface INFO Controller:handler_config_done: exit 2022-07-01 16:02:29,033 MQTT udi_interface.interface INFO interface:_message: setLogList response {'levels': '[{"id":5,"name":"Debug + Modules","value":"DEBUG_MODULES","level":9},{"id":4,"name":"Debug","value":"DEBUG","level":10},{"id":3,"name":"Info","value":"INFO","level":20},{"id":2,"name":"Warning","value":"WARNING","level":30},{"id":1,"name":"Error","value":"ERROR","level":40},{"id":0,"name":"Critical","value":"CRITICAL","level":50}]'} 2022-07-01 16:02:29,268 MQTT udi_interface.interface INFO interface:_message: Profile installation finished 2022-07-01 16:02:30,108 MQTT udi_interface.interface INFO interface:_message: custom data response {'idata': '{"profile_version":"3.0.1"}'} 2022-07-01 16:02:30,162 MQTT udi_interface.interface INFO interface:_message: Successfully set key = idata 2022-07-01 16:02:30,276 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message addnode 2022-07-01 16:02:30,277 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING addnode 2022-07-01 16:02:30,279 Thread-6 udi_interface INFO Controller:handler_start: Started HarmonyHub Node server 3.0.8 2022-07-01 16:02:30,280 Command udi_interface.interface DEBUG interface:_handleResult: add node response: {'id': '82a1cd5a-b74c-4b56-b5f8-90fcd40ecc6e', 'uuid': '00:0d:b9:56:0c:60', 'profileNum': 4, 'address': 'harmonyctrl', 'name': 'HarmonyHub Controller', 'nodeDefId': 'HarmonyController', 'nls': None, 'hint': '0x00000000', 'controller': 0, 'primaryNode': 'harmonyctrl', 'private': None, 'isPrimary': 1, 'enabled': 1, 'timeAdded': 1655166581737, 'timeModified': 1655166581737, 'dbVersion': 1} 2022-07-01 16:02:30,281 Thread-6 udi_interface.custom DEBUG custom:clear: CUSTOM: Clear ...saving 2022-07-01 16:02:30,283 Thread-6 udi_interface.custom INFO custom:_save: Sending data notices to Polyglot. 2022-07-01 16:02:30,284 Thread-6 udi_interface.interface DEBUG interface:send: PUBLISHING {'set': [{'key': 'notices', 'value': {}}]} 2022-07-01 16:02:30,287 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV10 - 1 :: getting dv GV8 2022-07-01 16:02:30,287 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV3 - 0 :: getting dv GV8 2022-07-01 16:02:30,288 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV5 - 5 :: getting dv GV8 2022-07-01 16:02:30,288 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV6 - 60 :: getting dv GV8 2022-07-01 16:02:30,289 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV7 - 6 :: getting dv GV8 2022-07-01 16:02:30,289 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV8 - 1 :: getting dv GV8 2022-07-01 16:02:30,289 Thread-6 udi_interface DEBUG Controller:handler_start: GV8=1 2022-07-01 16:02:30,290 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV10 - 1 :: getting dv GV7 2022-07-01 16:02:30,290 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV3 - 0 :: getting dv GV7 2022-07-01 16:02:30,291 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV5 - 5 :: getting dv GV7 2022-07-01 16:02:30,291 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV6 - 60 :: getting dv GV7 2022-07-01 16:02:30,292 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV7 - 6 :: getting dv GV7 2022-07-01 16:02:30,292 Thread-6 udi_interface.node DEBUG node:setDriver: harmonyctrl:HarmonyHub Controller Reporting set GV7 to 1 to Polyglot 2022-07-01 16:02:30,293 Thread-6 udi_interface.node DEBUG node:reportDriver: Updating value to 1 2022-07-01 16:02:30,293 Thread-6 udi_interface.interface DEBUG interface:send: PUBLISHING {'set': [{'address': 'harmonyctrl', 'driver': 'GV7', 'value': '1', 'uom': 25}]} 2022-07-01 16:02:30,295 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV10 - 1 :: getting dv GV9 2022-07-01 16:02:30,295 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV3 - 0 :: getting dv GV9 2022-07-01 16:02:30,296 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV5 - 5 :: getting dv GV9 2022-07-01 16:02:30,296 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV6 - 60 :: getting dv GV9 2022-07-01 16:02:30,297 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV7 - 1 :: getting dv GV9 2022-07-01 16:02:30,297 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV8 - 1 :: getting dv GV9 2022-07-01 16:02:30,297 Thread-6 udi_interface.node DEBUG node:getDriver: harmonyctrl:HarmonyHub Controller GV9 - 2 :: getting dv GV9 2022-07-01 16:02:30,298 Thread-6 udi_interface DEBUG Controller:handler_start: GV9=2 activity_method=2 2022-07-01 16:02:30,468 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message notices 2022-07-01 16:02:30,469 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING notices 2022-07-01 16:02:30,470 Command udi_interface.custom DEBUG custom:load: CUSTOM: load {} 2022-07-01 16:02:30,494 MQTT udi_interface.interface INFO interface:_message: Successfully set key = notices 2022-07-01 16:02:30,586 MQTT udi_interface.interface INFO interface:_message: Successfully set harmonyctrl :: GV3 to 0 UOM 25 2022-07-01 16:02:30,625 MQTT udi_interface.interface INFO interface:_message: Successfully set harmonyctrl :: GV7 to 6 UOM 25 2022-07-01 16:02:30,668 MQTT udi_interface.interface INFO interface:_message: Successfully set harmonyctrl :: GV7 to 4 UOM 25 2022-07-01 16:02:30,773 MQTT udi_interface.interface INFO interface:_message: Profile installation finished 2022-07-01 16:02:30,812 MQTT udi_interface.interface INFO interface:_message: Successfully set harmonyctrl :: GV7 to 5 UOM 25 2022-07-01 16:02:30,862 MQTT udi_interface.interface INFO interface:_message: Successfully set harmonyctrl :: GV7 to 1 UOM 25 2022-07-01 16:02:31,723 MQTT udi_interface.interface INFO interface:_message: Profile installation finished 2022-07-01 16:03:22,864 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message shortPoll 2022-07-01 16:03:22,866 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING shortPoll 2022-07-01 16:03:22,867 Thread-8 udi_interface DEBUG Controller:shortPoll: ... 2022-07-01 16:04:22,870 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message shortPoll 2022-07-01 16:04:22,872 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING shortPoll 2022-07-01 16:04:22,873 Thread-9 udi_interface DEBUG Controller:shortPoll: ... 2022-07-01 16:05:22,876 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message shortPoll 2022-07-01 16:05:22,878 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING shortPoll 2022-07-01 16:05:22,879 Thread-10 udi_interface DEBUG Controller:shortPoll: ... 2022-07-01 16:06:22,904 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message shortPoll 2022-07-01 16:06:22,905 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING shortPoll 2022-07-01 16:06:22,907 Thread-11 udi_interface DEBUG Controller:shortPoll: ... 2022-07-01 16:07:22,853 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message longPoll 2022-07-01 16:07:22,855 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING longPoll 2022-07-01 16:07:22,856 Thread-12 udi_interface DEBUG Controller:longPoll: ... 2022-07-01 16:07:22,857 Thread-12 udi_interface INFO Controller:heartbeat: hb=0 2022-07-01 16:07:22,858 Thread-12 udi_interface.interface DEBUG interface:send: PUBLISHING {'command': [{'address': 'harmonyctrl', 'cmd': 'DON'}]} 2022-07-01 16:07:22,903 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message shortPoll 2022-07-01 16:07:22,905 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING shortPoll 2022-07-01 16:07:22,906 Thread-13 udi_interface DEBUG Controller:shortPoll: ... 2022-07-01 16:07:22,945 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message command Edited July 4, 2022 by JimboAutomates
Jimbo.Automates Posted July 4, 2022 Posted July 4, 2022 I don't see it trying to run discover, please hit the discover in the PG3 UI. If you still have issues, please PM me the file generated by "Download Log Package".
Recommended Posts