SHM Posted October 8, 2022 Share Posted October 8, 2022 (edited) Just completed migration to IoP and am in the process of adding back my Z wave nodes to the Zooz 700 dongle. My Baldwin door lock will be recognized on the add command but it fails per the attached message. It worked fine on my ISY 994. I have gone thru the firmware update for the dongle, to no effect. Any ideas? Edited October 9, 2022 by SHM more info Link to comment Share on other sites More sharing options...
kzboray Posted October 8, 2022 Share Posted October 8, 2022 Neither the 300 or the 500 series z-wave board for the ISY994i supported S2 security. It may be that they were so old compared to the current 700 series spec that there wasn't a conflict with regards to S2 security and the Baldwin door lock. I'm just guessing. The 700 series Zooz dongle and the newer Polisy combination are aware of S2, but not fully compliant. The new Eisy or the Matter daughter card that will be available in the November time frame will be z-wave 700 certified and support S2 security. Link to comment Share on other sites More sharing options...
Recommended Posts