firstone Posted January 24, 2023 Posted January 24, 2023 If you do, what firmware version do you have and can you write/delete user codes? I'm trying to resolve this with UDI but wanted to see if if it's just me.
gzahar Posted January 24, 2023 Posted January 24, 2023 4 hours ago, firstone said: If you do, what firmware version do you have and can you write/delete user codes? I'm trying to resolve this with UDI but wanted to see if if it's just me. Yes. Tried on both a lock included with S0 and another with S2. Lock firmware is 0.11.0 Polisy is 5.5.4. Zmatter - Beta
firstone Posted January 24, 2023 Author Posted January 24, 2023 (edited) Thank you. I have 0.11, 0.10.8 and 0.10.9. 11 works but the others don't. Schlage support has told me firmware shouldn't make a difference but I don't really believe them. Edited January 25, 2023 by firstone
firstone Posted January 25, 2023 Author Posted January 25, 2023 2 hours ago, gzahar said: Yes. Tried on both a lock included with S0 and another with S2. Lock firmware is 0.11.0 Polisy is 5.5.4. Zmatter - Beta Mine doesn't have an option of S0. Everything but S2 is disabled. And if I uncheck S2, it fails to enroll.
gzahar Posted January 25, 2023 Posted January 25, 2023 39 minutes ago, firstone said: Mine doesn't have an option of S0. Everything but S2 is disabled. And if I uncheck S2, it fails to enroll. S0 was leftover from Zwave migration. S2 was after I excluded and re-added one. (I will eventually remove & add back the 2 still at S0 when I have the time)
jec6613 Posted January 25, 2023 Posted January 25, 2023 (edited) I have three, unsure of firmware revisions but the two I've re-joined as S2 as well as my remaining S0 leftover don't send status updates at all, and I haven't tried setting user codes yet. Currently, they're extremely buggy ... fortunately I'm WFH and they still work as coded door locks so I'm alright for the moment. Working with support on all of this, obviously. Edited January 25, 2023 by jec6613
Recommended Posts