Lamplinc dual band

[drglenn]

Is there a way to use the control command with a lamplinc dual band? I would like to be able to tell if the lamp was turned on manually rather than through a program or scene. I have it set to turn on and off by a motion detector or override the motion detector if I use a button on a kpl. I have the lamplinc dual crosslinked with the kpl button. Thanks for any ideas.

[Michel Kohanim]

Hi drglenn,

 

Yes, absolutely. All new LampLincs (especially the dual band one) have sense feature which means that:

1. You can use Control - on/off/dim/brighten/fast on/fast off in programs

2. Use the device as controller in a scene. This way, if someone manually turns on the LL, the responders in the scene for which the LL is a controller shall respond accordingly

 

With kind regards,

Michel

Is there a way to use the control command with a lamplinc dual band? I would like to be able to tell if the lamp was turned on manually rather than through a program or scene. I have it set to turn on and off by a motion detector or override the motion detector if I use a button on a kpl. I have the lamplinc dual crosslinked with the kpl button. Thanks for any ideas.