Grant Baker Posted April 9, 2023 Posted April 9, 2023 (edited) Brand new eisy is hardwired to local network and visible by router as eisy and responds to ping at the respective IP. However, clear cache and fresh start.jlp launch doesn’t find eisy. adding https://192.168.xxx:8443/desc though launcher says not found. I plugged in a monitor via hdmi, and it just shows a terminal. After admin/admin, it says “unless you’re a geek, you shouldn’t be here” 🤷🏻♂️ Edit: already 5 clicked power button to reboot network, and then 10 clicked power to factory reset. Same result. Edit 2: I'm on a macOS 12.6.3 Edited April 9, 2023 by Grant Baker
TRI0N Posted April 9, 2023 Posted April 9, 2023 34 minutes ago, Grant Baker said: Brand new eisy is hardwired to local network and visible by router as eisy and responds to ping at the respective IP. However, clear cache and fresh start.jlp launch doesn’t find eisy. adding https://192.168.xxx:8443/desc though launcher says not found. I plugged in a monitor via hdmi, and it just shows a terminal. After admin/admin, it says “unless you’re a geek, you shouldn’t be here” 🤷🏻♂️ Edit: already 5 clicked power button to reboot network, and then 10 clicked power to factory reset. Same result. Try going to this location using your IP address... https://your-ip-address:8443/admin.jnlp - or -http://your-ip-address:8080/admin.jnlp Lets see if you're using an old start.jnlp that doesn't see the new eisy. TRI0N
Solution Techman Posted April 9, 2023 Solution Posted April 9, 2023 Try removing power from the eisy for a few minutes. Clear your java cache including all installed applications, then download the IoX Launcher from here: https://isy.universal-devices.com/start.jnlp After it powers up, press the front button ONCE, then wait about 10 minutes before you try to access the eisy.
Grant Baker Posted April 9, 2023 Author Posted April 9, 2023 39 minutes ago, TRI0N said: Try going to this location using your IP address... https://your-ip-address:8443/admin.jnlp - or -http://your-ip-address:8080/admin.jnlp Lets see if you're using an old start.jnlp that doesn't see the new eisy. TRI0N no dice for either, "refused to connect"
Grant Baker Posted April 9, 2023 Author Posted April 9, 2023 53 minutes ago, Techman said: Try removing power from the eisy for a few minutes. Clear your java cache including all installed applications, then download the IoX Launcher from here: https://isy.universal-devices.com/start.jnlp After it powers up, press the front button ONCE, then wait about 10 minutes before you try to access the eisy. OMG, that worked! Wiki and such says nothing about that procedure... Thanks! Grant
TRI0N Posted April 9, 2023 Posted April 9, 2023 32 minutes ago, Grant Baker said: no dice for either, "refused to connect" Those should have worked. Maybe you had the wrong IP address. That is the failsafe way to connect without the start.jnlp isy finder. But glad you are in and all is good. TRI0N
Recommended Posts