JMathers Posted July 14, 2023 Posted July 14, 2023 Wote the program and saved it. A progress bar appears to show the save completes. However, program does not execute at the defined time. Check of "Summary" for the program reveals "Activity: Not Loaded" and "Status: Out of Memory." What does this mean and how do I correct yhe problem?
Solution MrBill Posted July 14, 2023 Solution Posted July 14, 2023 Check Help > About It sounds like firmware and UI are different versions. They must be exactly the same. 1
JMathers Posted July 14, 2023 Author Posted July 14, 2023 Thanks, MrBill. So I checked; Firmware is "UD994_OADR v5.3.0" while the UI is "UD994 v4.9.0" What are the steps to make them the same?
JMathers Posted July 14, 2023 Author Posted July 14, 2023 MrBill, Finally got the the Firmaware and UI versions to match - bith are now v5.3.0. Not Loaded and Out of Memory entries are gone. I'll see how the program responds at sunset today. Thanks for the help so far . . . 2
MrBill Posted July 14, 2023 Posted July 14, 2023 2 hours ago, JMathers said: MrBill, Finally got the the Firmaware and UI versions to match - bith are now v5.3.0. Not Loaded and Out of Memory entries are gone. I'll see how the program responds at sunset today. Thanks for the help so far . . . You may or may not need to re-save the program to get the program to work. (since it was actually created with a mismatched versions.) If so, you can likely just open it, click on any program line, hit the update button, then the save button again.
Recommended Posts