oskrypuch Posted July 22, 2023 Posted July 22, 2023 (edited) So, I understand that the Z-matter board must have the USB connectors for the new eisy. But, I have the Polisy, actually two of them, yes bought a pair two months before the eisy was announced -- oh well. In any case, do want to keep the Polisys running as long as practical. I have the Zooz USB dongle, dipped into Z-Wave during the Insteon time of troubles, actually delighted that Insteon is back, can even buy PLMs. My mixed setup is working great, mobile UD, PG3 (older) have some weather nodes as well. I have frozen it at IOX 5.4x. Wish there was a LTS concept in these firmwares. But, I digress. My question is, does the Z-matter board "pop-out" of the USB box, and can it then be inserted into the Policy box as it was prior? Or, do you need to use one of the USB slots on the back of the Polisy? I understand I will have to update to the latest firmware, and so on, read through all the wiki stuff (and some of the trouble reports here) -- so I remain a bit reluctant. That said, eventually I may get firmware "orphaned", so will need to do it some time. * Orest Edited July 22, 2023 by oskrypuch
tlightne Posted July 22, 2023 Posted July 22, 2023 It is the same board whether it is in the USB enclosure or not. You can either use it as USB or internal to POLISY. 2
Recommended Posts