MarkJames Posted July 10 Posted July 10 I just received a new 2342-222 8 button remote. I've been struggling to turn it into an 8 button toggle controller. I'm following the instructions about holding the set button 3 seconds a few times and all the lights flash appropriately. But when I get to the end it tells me to press D and a down arrow followed by A and a down arrow. There are no up or down arrows on this controller so I don't know what they're referring to. I figured they meant dim or bright but this has no dim/bright..... Any advice would be much appreciated
ELA Posted July 10 Posted July 10 Perhaps they are referring to the 4 button configuration with arrows shown here:? https://shop.insteon.com/products/mini-remote-control-keypad-4-scene 1
MarkJames Posted July 10 Author Posted July 10 (edited) That's an interesting observation. Might be a problem with their documentation. I'm taking the instructions from here https://cache.insteon.com/documentation/2342-x22-en.pdf The 'a' through 'd' on mine are the top two rows. I continue on with 'e' through 'h'. Not sure what to make of it but so far I'm getting nowhere in making it 8 button toggle. Could be I'm not understanding the functionality Edited July 10 by MarkJames
MarkJames Posted July 10 Author Posted July 10 (edited) Actually you nailed it. The trick is to ignore the A thru H letters and act as if its an A thru D controller. Pressing D down (bottom left) then tapping A down (top left) repeatedly confgures it. I was pressing the D button that is on mine - which is second row right. It didn't do anything at all. Thanks! Edited July 10 by MarkJames
Recommended Posts