drprm1 Posted January 10 Author Posted January 10 Installed in different slot, configured and started. Not showing connected Quote
Panda88 Posted January 10 Posted January 10 (edited) Seems there is an issue - you can try to reinstall I changed the install style Edited January 10 by Panda88 Quote
drprm1 Posted January 10 Author Posted January 10 Okay great! My lock is now showing up in the test node.Didn’t see what it looked like like in the AC I’ll look forward to the production update and thanks! Quote
Panda88 Posted January 10 Posted January 10 can you generate a debug log where you open and close the lock and query it Quote
drprm1 Posted January 10 Author Posted January 10 Here you go YoLinkTest_1-9-2025_124948_PM.zip Quote
drprm1 Posted January 10 Author Posted January 10 Lock shows up in AC but controls don’t change the lock’s state Quote
Panda88 Posted January 10 Posted January 10 Seems like the log you sent is old Can you generate a new one - manually opening the lock and then try to control it from teh AC as well . I am a little guessing on the control (until official API is posted) 1 Quote
drprm1 Posted January 10 Author Posted January 10 Here is the log. I controlled the lock several times manually and from AC YoLinkTest_1-10-2025_80937_AM.zip Quote
drprm1 Posted January 10 Author Posted January 10 (edited) When using the test plug-in none of the nodes seem to update in the AC. Edited January 10 by drprm1 Quote
Panda88 Posted January 10 Posted January 10 Maybe you can try to stop the regular node server while testing I found part of the issue with the new lock - I can likely get to retrieve data fairly easily, but controlling it may be more difficult without documentation Quote
drprm1 Posted January 10 Author Posted January 10 (edited) Pretty sure I stopped the regular node for this test...Did another log. Started test plug-in and let it find all nodes for a few minutes then I used the AC to lock, unlock, and query several times then locked and unlocked several times manually. (regular node was stopped) Here's the log YoLinkTest_1-10-2025_80937_AM.zip Edited January 10 by drprm1 Quote
Panda88 Posted January 10 Posted January 10 thanks it will not work yet as the syntax is not correct yet I'll get to it early next week 1 Quote
drprm1 Posted January 13 Author Posted January 13 Updated YoLink Test to 1.3.14. I can control lock via AC fine. Manually controlling lock or control by Yolink app the status in AC isn't updated. The node isn't updated correctly when using "update status" or "query" either. Even though I can lock and unlock using AC it shows Nodeserver status as "not connected" and connection state as "offline" YoLinkTest_1-13-2025_24659_PM.zip Quote
Panda88 Posted January 14 Posted January 14 Can you try 1.3.15 I will only pick switches and locks - The code somehow gets the online status wrong, but I cannot figure out why - added some more debug info Quote
drprm1 Posted January 14 Author Posted January 14 1.3.1.5 tried. Same functioning as 1.3.14 YoLinkTest_1-13-2025_80848_PM.zip Quote
drprm1 Posted January 14 Author Posted January 14 Nice! Works as it should. AC status updated when changed manually or by Yolink app. Can control from AC. Shows online and connected. (Nitpick, battery shows -1) Appreciate your efforts Quote
Panda88 Posted January 14 Posted January 14 can you include the latest log - I'll try to fix the battery - should be easy - probably just reported differently Quote
drprm1 Posted January 14 Author Posted January 14 Just now, Panda88 said: can you include the latest log - I'll try to fix the battery - should be easy - probably just reported differently YoLinkTest_1-14-2025_112114_AM.zip Quote
Panda88 Posted January 14 Posted January 14 Does the new lock include a doorbell - if so can you try to press it and send me a log Quote
drprm1 Posted January 14 Author Posted January 14 Here is the log with me pressing the doorbell a couple of times. Not sure who would use the doorbell its very hard to see the symbol on the keypad. YoLinkTest_1-14-2025_122453_PM.zip Quote
Panda88 Posted Saturday at 11:16 PM Posted Saturday at 11:16 PM released 1.3.22 - give it a try Quote
drprm1 Posted Saturday at 11:33 PM Author Posted Saturday at 11:33 PM updated to 1.3.22 Dashboard shows "disconnected" If I try and start plugin a green pop up says "already running" No log is showing Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.