mvgossman Posted July 7, 2010 Share Posted July 7, 2010 Attempting to create a "THEN" to set the dim setting for an Inlinelinc in a program. All I see are On, Off, Faston, Fastoff, a lot of Beep Durations, Backlight levels. How do you set the particular dimming level? I have the ISY-99i and the device is an InlineLinc dimmer, brand new, v.38. Mitch Link to comment
lawr1000 Posted July 7, 2010 Share Posted July 7, 2010 If you look here http://forum.universal-devices.com/viewtopic.php?t=4784 you will see I had a problem with doing a Status on an In-LineLinc also. You problem is probably related to the same bug which should be fixed in the next release. Until then if you add your In-LineLinc manually you will see there are 2 type of In-LineLinc available. 1st [01.02] (2475D) In-LineLinc Dimmable 2nd [01.1A] (2475D) InlineLinc Dimmer Auto select seems to use the 2nd one which didn't work for me. I you manually select the 1st one it may work better. Link to comment
mvgossman Posted July 7, 2010 Author Share Posted July 7, 2010 Thanks very much! This worked. Mitch If you look herehttp://forum.universal-devices.com/viewtopic.php?t=4784 you will see I had a problem with doing a Status on an In-LineLinc also. You problem is probably related to the same bug which should be fixed in the next release. Until then if you add your In-LineLinc manually you will see there are 2 type of In-LineLinc available. 1st [01.02] (2475D) In-LineLinc Dimmable 2nd [01.1A] (2475D) InlineLinc Dimmer Auto select seems to use the 2nd one which didn't work for me. I you manually select the 1st one it may work better. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.