Skip to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

CO2 Warning on Elk - How to add to Plugin

Featured Replies

@Jimbo.Automates

CO2 sensor throwing an error not an alarm indicating needs to be replaced. How would I add this notification to the Plugin so I get the message?

Eg which controller.GV number would it be?

  • Author

Found the node, as mentioned not alarming but throwing the notice of malfunction on the keypad.

co2 node.png

  • Author

Thanks, probably just shot myself in the foot by replacing sensor which removed the replace sensor warning. Guess we will just wait a couple of years for the next replacement warning. Thanks for taking the time to look.

The plugin already reports this. A CO2 "replace the sensor" condition is a zone trouble, so an alarm program never sees it.

On the CO2 zone node, Logical Status (ST) is what the panel sends for that condition:

Normal = Sensor is fine

Trouble = Error, including end-of-life / needs replacement

Violated = The zone is in alarm

Bypassed = Bypassed

Triggered Alarm stays off for a trouble. Programs that watch Last Triggered Zone or Triggered Alarm will not run.

You can add this for all your sensors:

If
        'ELK / <Area> / CO2' Logical Status is Trouble
Then
        Send Notification ...

Use Status, not Control. The plugin does not send a control event when the status changes to Trouble.

If the notification is sent because that zone changed, # is the zone, so the message can be:

${sys.node.#.name} reports ${sys.node.#.status} and needs to be replaced

That fills in the zone name and the word Trouble. If the notification is not triggered by that zone, use the zone address from Admin Console instead of # (the same form as the examples in the README, such as n004_zone_15).

The panel's system-trouble list has no CO2-replace flag. Box Tamper, Transmitter Low Battery, Lost Transmitter, and Fire are separate zone troubles. Display Message In Keypad Line 1 and Line 2 on the controller only say that the keypad is showing text. They do not include the words.

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.