Skip to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Looking to upgrade from an ISY99i to the new eisy r2

Featured Replies

I am looking for an overview of what the upgrade process would be like to convert from using an older ISY99i to the new eisy r2.

Solved by Guy Lavoie

  • Author
On 11/14/2026 at 10:27 AM, Techman said:

Take a look at this link for a migration overview

Eisy:User Guide - Universal Devices, Inc. Wiki

The documentation in the link refers to the ISY994 - would it also apply to the ISY994i? Just want to be sure...

Edited by CCataldo
Changed "ISY99i" to ISY994i"

The migration to the eisy requires that your existing firmware must be 4.x or 5.x. If your running 3.x firmware then the migraion isn't possible due to the incompatibility. You'll probably have to build the new system from scratch

You should also use a USB PLM with the eisy as it doesn't require a conversion cable

  • Author
20 hours ago, Techman said:

The migration to the eisy requires that your existing firmware must be 4.x or 5.x. If your running 3.x firmware then the migraion isn't possible due to the incompatibility. You'll probably have to build the new system from scratch

You should also use a USB PLM with the eisy as it doesn't require a conversion cable

I am currently running Z-wave. I see there is an enclosure for it for sale on the website, but where can I get the circuit board itself?

I will most likely discontinue PLM use.

My Firmware version is 5.3.3.

image.png

Edited by CCataldo
Added additional info.

  • Solution
8 minutes ago, CCataldo said:

Hmmm... the documentatio0n talks about a move to using something called "ZMatter". I am confused about this.

The documentation needs to be updated (isn't that always the case?). UDI now supports several dongles, some of which do both Z=Wave and Zigbee.

The supported dongles are listed here:

Universal Devices
No image preview

Protocol Support

Supported Protocols: Z-Wave - Requires an external dongle (not included) - See supported dongles Zigbee - Requires an external dongle (not included) - See supported dongles Matter - Included for WiFi
  • Author

So seems like I would just need a Z-wave dongle, such as the Zooz 800 series, for Z-wave use with the eisy r2. Now, if only the price of memory chips would come down a bit...

Is there a good source of documentation in the form of a programming guide for the eisy r2?

Programming the eisy is very similar to the isy994i that you're already familiar with. The harder part (that we're all dealing with right now) is switching over to eisy-ui. It comes with just using it.

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.