PLM Problem

[rdcole]

This last week the ISY-99 quit talking to the Insteion Network.

 

When I login via the administrative console I get a bunch of communications errors and all of the Programs in the ISY are missing.

 

If I unplug the PLM and plug it back in I see the usually Power one Reset LED behavior of the ISY with a couple of RX/TX Flashes then nothing. Just a Power LED.

 

I think I should be seeing regular RX/TX activity in sync with Insteion activity.

If I switch lights on and off with the RemoteLinc I see LED activity on the PLM but nothing on the RX/TX Lights of the ISY.

I tried replacing the cable between the PLM and ISY with no effect.

 

Could this be another Failed PLM?

 

 

Ron

[Brian H]

In the diagnostics test area.

What does the PLM Info/Status choice show?

Should say connected and give the PLMs firmware revision and its address.