thomasolsen Posted December 7, 2010 Share Posted December 7, 2010 After a power outage, ISY-26 is not working. Cycled power and unit comes back with three LEDs solid and a flashing Error light. Troubleshooting guide indicates this is a file system error, but does not report on how to proceed. As expected, unit is unresponsive from network. From what I can tell, the ISY-26 does not have a reset button like the ISY-99. Now what?? Link to comment
Michel Kohanim Posted December 8, 2010 Share Posted December 8, 2010 Hello thomasolsen, Factory reset is not going to help the situation since you have a corrupt file system and most probably a defective SD Card. This article here shows how to replace your SD Card on 99. Except for mechanical differences, all the procedural steps are the same for 26: http://www.universal-devices.com/mwiki/ ... an_SD_Card If you want to do a factory reset, you can use Hyperterminal to get to the Shell and then issue FR (for Factory Reset): http://www.universal-devices.com/mwiki/ ... _ISY_Shell With kind regards, Michel Link to comment
thomasolsen Posted December 9, 2010 Author Share Posted December 9, 2010 Thanks for the links -- very well put together! I am able to ping my ISY-26 (192.168.1.125) but I am not able to telnet (192.168.1.125 126, per instructions) and do not get an answer from HyperTerminal either with a null modem cable to port B on the device. Any other tricks or suggestions? Link to comment
Michel Kohanim Posted December 9, 2010 Share Posted December 9, 2010 Hello again, If your ISY has 2.7.15, you might want to try: telnet your.isy.ip (without the 126) With kind regards, Michel Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.