Easy (I think) Scene Question

[gadgetfreak]

I created a scene with three switches: One goes on 100%, one goes to 50% and one to go off. So all three lights are activated in the same scene. When I add that scene to a program, should the scene be set to on or off? And, if you tell me "on" (to actually "run" the scene), what would "off" do? Thanks.

[Goose66]

Setting the scene ON turns on all devices to their preset ON levels and preset ramp rates. Setting the scene OFF turns off all devices.

[gadgetfreak]

Thanks for the reply. So in my case, I would set the program to turn ON the scene which would set light 1 to 100%, light 2 to 50% and light 3 to 0% (which is the same as off)?

 

And I would set the scene to off if I want all 3 lights to go off?

 

Thanks again.

[oberkc]

So in my case, I would set the program to turn ON the scene which would set light 1 to 100%, light 2 to 50% and light 3 to 0% (which is the same as off)?

 

Yes. In this case your "on" levels for that scene would be 100%, 50%, and 0%.