Probably nothing .. but curious

[andyf0]

Playing with Event Viewer with Device Communications I always see this when turning a device on or off. This is turning a Lamplinc on and off with a RemoteLinc.

 

Fri 03/25/2011 06:36:22 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 11 00 LTONRR (00)

 

Fri 03/25/2011 06:36:22 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:22 AM : [ 11 AF F4 1] DON 0

 

Fri 03/25/2011 06:36:22 AM : [ 11 AF F4 1] ST 255

 

Fri 03/25/2011 06:36:22 AM : [ 14 52 EE 1] ST 168

 

Fri 03/25/2011 06:36:23 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 11 00 LTONRR (00)

 

Fri 03/25/2011 06:36:23 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:23 AM : Duplicate: ignored

 

Fri 03/25/2011 06:36:23 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 11 00 LTONRR (00): Process Message: failed

 

Fri 03/25/2011 06:36:23 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:23 AM : [iNST-SRX ] 02 50 11.AF.F4 18.CF.62 41 11 01 LTONRR (01)

 

Fri 03/25/2011 06:36:23 AM : [standard-Cleanup][11.AF.F4-->ISY/PLM Group=1] Max Hops=1, Hops Left=0

 

Fri 03/25/2011 06:36:32 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 13 00 LTOFFRR(00)

 

Fri 03/25/2011 06:36:32 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:32 AM : [ 11 AF F4 1] DOF 0

 

Fri 03/25/2011 06:36:32 AM : [ 11 AF F4 1] ST 0

 

Fri 03/25/2011 06:36:32 AM : [ 14 52 EE 1] ST 0

 

Fri 03/25/2011 06:36:32 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 13 00 LTOFFRR(00)

 

Fri 03/25/2011 06:36:32 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:32 AM : Duplicate: ignored

 

Fri 03/25/2011 06:36:32 AM : [iNST-SRX ] 02 50 11.AF.F4 00.00.01 CB 13 00 LTOFFRR(00): Process Message: failed

 

Fri 03/25/2011 06:36:32 AM : [standard-Group][11.AF.F4-->Group=1] Max Hops=3, Hops Left=2

 

Fri 03/25/2011 06:36:32 AM : [iNST-SRX ] 02 50 11.AF.F4 18.CF.62 41 13 01 LTOFFRR(01)

 

Fri 03/25/2011 06:36:32 AM : [standard-Cleanup][11.AF.F4-->ISY/PLM Group=1] Max Hops=1, Hops Left=0

 

It's the Process Message Failed that concerns me. Also, the Duplicate: ignored message a problem?

[LeeG]

andyf0

 

This can be ignored when using a RemoteLinc and any other RF only device such as a Motion Sensor or TriggerLinc. RF only devices send multiple Group Broadcast messages (2 or 3 total). The ISY trace is indicating multiple Group Broadcast messages are received with the extra ones are being ignored. Wired devices send one Group Broadcast message (per Insteon protocol).

 

Lee

[andyf0]

There you go. I saw them with the RemoteLinc and the new Motion Sensor I installed. Thanks for the info.