bhimebaugh Posted April 5, 2011 Posted April 5, 2011 When looking at logs tonight in dealing with the whole issue of the thermostats constantly stopping to communicate, I happened to notice a message that says "Process Message: failed" that is occurring frequently. The error message is in the log below my sig and I made the last entry in the log red to point out the line that I keep seeing. Can someone tell me what this means and if it is anything to be concerned about or part of some normal process? Thanks, Bruce ----------- Mon 04/04/2011 08:39:54 PM : [iNST-SRX ] 02 50 14.2D.B3 00.00.01 C7 13 01 LTOFFRR(01) Mon 04/04/2011 08:39:54 PM : [standard-Group][14.2D.B3-->Group=1] Max Hops=3, Hops Left=1 Mon 04/04/2011 08:39:54 PM : [ 14 2D B3 1] DOF 1 Mon 04/04/2011 08:39:54 PM : [ D 92 C2 1] ST 0 Mon 04/04/2011 08:39:54 PM : [ 12 55 B6 1] ST 0 Mon 04/04/2011 08:39:54 PM : [ 14 2D B3 1] ST 0 Mon 04/04/2011 08:39:54 PM : [iNST-SRX ] 02 50 14.2D.B3 00.00.01 C7 13 01 LTOFFRR(01) Mon 04/04/2011 08:39:55 PM : [standard-Group][14.2D.B3-->Group=1] Max Hops=3, Hops Left=1 Mon 04/04/2011 08:39:55 PM : Duplicate: ignored Mon 04/04/2011 08:39:55 PM : [iNST-SRX ] 02 50 14.2D.B3 00.00.01 C7 13 01 LTOFFRR(01): Process Message: failed Mon 04/04/2011 08:39:55 PM : [standard-Group][14.2D.B3-->Group=1] Max Hops=3, Hops Left=1 Mon 04/04/2011 08:39:55 PM : [iNST-SRX ] 02 50 14.2D.B3 12.9F.FF 41 13 01 LTOFFRR(01) Mon 04/04/2011 08:39:55 PM : [standard-Cleanup][14.2D.B3-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Mon 04/04/2011 08:39:55 PM : [iNST-SRX ] 02 50 14.2D.B3 12.9F.FF 42 13 01 LTOFFRR(01) Mon 04/04/2011 08:39:55 PM : [standard-Cleanup][14.2D.B3-->ISY/PLM Group=1] Max Hops=2, Hops Left=0 Mon 04/04/2011 08:39:55 PM : Duplicate: ignored Mon 04/04/2011 08:39:55 PM : [iNST-SRX ] 02 50 14.2D.B3 12.9F.FF 42 13 01 LTOFFRR(01): Process Message: failed Mon 04/04/2011 08:39:55 PM : [standard-Cleanup][14.2D.B3-->ISY/PLM Group=1] Max Hops=2, Hops Left=0 Mon 04/04/2011 08:39:55 PM : [iNST-SRX ] 02 50 14.2D.B3 12.9F.FF 22 F6 41 (41) Mon 04/04/2011 08:39:55 PM : [standard-Direct Ack][14.2D.B3-->ISY/PLM Group=0] Max Hops=2, Hops Left=0 Mon 04/04/2011 08:41:15 PM : [iNST-SRX ] 02 50 14.2D.AB 00.00.01 C7 13 01 LTOFFRR(01) Mon 04/04/2011 08:41:15 PM : [standard-Group][14.2D.AB-->Group=1] Max Hops=3, Hops Left=1 Mon 04/04/2011 08:41:15 PM : [ 14 2D AB 1] DOF 1 Mon 04/04/2011 08:41:15 PM : [ D C9 43 1] ST 0 Mon 04/04/2011 08:41:15 PM : [ 14 2D AB 1] ST 0 Mon 04/04/2011 08:41:15 PM : [iNST-SRX ] 02 50 14.2D.AB 00.00.01 C7 13 01 LTOFFRR(01) Mon 04/04/2011 08:41:15 PM : [standard-Group][14.2D.AB-->Group=1] Max Hops=3, Hops Left=1 Mon 04/04/2011 08:41:15 PM : Duplicate: ignored Mon 04/04/2011 08:41:15 PM : [iNST-SRX ] 02 50 14.2D.AB 00.00.01 C7 13 01 LTOFFRR(01): Process Message: failed Mon 04/04/2011 08:41:15 PM : [standard-Group][14.2D.AB-->Group=1] Max Hops=3, Hops Left=1 Mon 04/04/2011 08:41:15 PM : [iNST-SRX ] 02 50 14.2D.AB 12.9F.FF 41 13 01 LTOFFRR(01) Mon 04/04/2011 08:41:15 PM : [standard-Cleanup][14.2D.AB-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Mon 04/04/2011 08:41:15 PM : [iNST-SRX ] 02 50 14.2D.AB 12.9F.FF 42 13 01 LTOFFRR(01) Mon 04/04/2011 08:41:15 PM : [standard-Cleanup][14.2D.AB-->ISY/PLM Group=1] Max Hops=2, Hops Left=0 Mon 04/04/2011 08:41:15 PM : Duplicate: ignored Mon 04/04/2011 08:41:15 PM : [iNST-SRX ] 02 50 14.2D.AB 12.9F.FF 42 13 01 LTOFFRR(01): Process Message: failed Mon 04/04/2011 08:41:15 PM : [standard-Cleanup][14.2D.AB-->ISY/PLM Group=1] Max Hops=2, Hops Left=0
LeeG Posted April 5, 2011 Posted April 5, 2011 bhimebaugh The "Duplicate: ignored" and "Process Message: failed" can be ignored when associated with an RF device. The RF devices issue multiple copies of the same message resulting in ignored and failed conclusions. This is what the ISY does with the duplicate messages. The first of each message is being handled correctly by the ISY. Devices 14.2D.B3 and 14.2D.AB, what are they, motion sensor, triggerlinc or thermostat? Lee
Recommended Posts
Archived
This topic is now archived and is closed to further replies.