jblackst5000 Posted April 18, 2011 Posted April 18, 2011 I have a Home Theater in our finished basement and would like to create a scene initiated by my 6 button RemoteLinc. The theater has two sets of lights. There are 6 cam lights controlled by an Insteon SwitchLinc Dimmer and 2 Sconses controlled by an Insteon 6 button dimmer. I would like to use the RemoteLinc because before a movie starts I want the lights to slowly ramp down and finally turning off the cam lights and leaving the sconses at 15%. When the movie is over I would then like to use the remoteLinc to slowly turn on both lights. I had a dealer program one of the buttons on the 6 button dimmer to do what I would like the RemoteLinc to do. He wrote a program that is called when button "A" is one or off. I have a ISY99/ir controller. I have not looked into the IR capabilities built into the ISY99/ir. Maybe I could create my desired scene by using either the remote to the Denon AVR receiver or the Epson 1080P Projector. Thank You,
jlamb Posted December 6, 2011 Posted December 6, 2011 I know your post is pretty old now, but I stumbled upon your post looking for something else. I have light scenes that take place when I play, pause, or watch movies. I have my isy99i ir pro doing some pretty amazing things combined with a global cache ip2ir. BTW, I have a denon avr-4311 and an epson 6500ub projector. If you have any questions about any specifics, let me know. I may be of help. One example is that I have a 8 button kpl on the wall. When I hit one of the KPL buttons (Theater AV), it turns on the denon rec/amp, turns on the epson 6500ub, turns on the dish network sat reciever (to sportscenter!), and turns the lights to an "intermission" light scene. When I hit the button again to turn off, it turns everything off! It works great and my wife loves it! If I can be of any help let me know!
Recommended Posts