jca001 Posted June 19, 2011 Posted June 19, 2011 I posted this a little while ago, so I thought, I did not get any posting errors, but I cannot find it anywhere. It may under a little different topic. So I am sorry if there is a duplicate. I was researching another problem and had the event viewer open and noticed the following. Sun 06/19/2011 16:59:15 : [iNST-SRX ] 02 50 11.AE.4B 00.00.02 C7 13 00 LTOFFRR(00) Sun 06/19/2011 16:59:15 : [standard-Group][11.AE.4B-->Group=2] Max Hops=3, Hops Left=1 Sun 06/19/2011 16:59:15 : [ 11 AE 4B 2] DOF 0 Sun 06/19/2011 16:59:15 : [ 11 AE 4B 2] ST 0 Sun 06/19/2011 16:59:15 : [ A 9A B0 1] ST 0 Sun 06/19/2011 16:59:15 : [iNST-SRX ] 02 50 11.AE.4B 00.00.02 C7 13 00 LTOFFRR(00) Sun 06/19/2011 16:59:15 : [standard-Group][11.AE.4B-->Group=2] Max Hops=3, Hops Left=1 Sun 06/19/2011 16:59:15 : Duplicate: ignored Sun 06/19/2011 16:59:15 : [iNST-SRX ] 02 50 11.AE.4B 00.00.02 C7 13 00 LTOFFRR(00): Process Message: failed Sun 06/19/2011 16:59:15 : [standard-Group][11.AE.4B-->Group=2] Max Hops=3, Hops Left=1 Sun 06/19/2011 16:59:16 : [iNST-SRX ] 02 50 11.AE.4B 0F.D7.C4 41 13 02 LTOFFRR(02) Sun 06/19/2011 16:59:16 : [standard-Cleanup][11.AE.4B-->ISY/PLM Group=2] Max Hops=1, Hops Left=0 I am not sure if it is just because it was a duplicate request or there is a real problem I should be researching. If it is really not an error, then I would suggest the text of the message be changed to something else like the message above it, Process Message: Ignored duplicate. This is turning on and off an AppllianceLinc from a RemoteLinc.
LeeG Posted June 19, 2011 Posted June 19, 2011 This is normal for an RF device. Motion Sensors, TriggerLincs, RemoteLincs send multiple Group Broadcast messages. The second Group Broadcast is labeled "Duplicate", the third is labeled "failed". It reflects the existence of multiple Group Broadcast messages. If it were not an RF device something would be wrong. Ignore it for an RF device. Sun 06/19/2011 16:59:15 : [iNST-SRX ] 02 50 11.AE.4B 00.00.02 C7 13 00 LTOFFRR(00) Sun 06/19/2011 16:59:15 : [standard-Group][11.AE.4B-->Group=2] Max Hops=3, Hops Left=1 Sun 06/19/2011 16:59:15 : Duplicate: ignored Sun 06/19/2011 16:59:15 : [iNST-SRX ] 02 50 11.AE.4B 00.00.02 C7 13 00 LTOFFRR(00): Process Message: failed Some RF devices issue 2 Group Broadcast messages, some issue 3 as in this case.
Recommended Posts