RemoteLinc v.35 (2440)

[SteveSBE]

I have a question about the behavior of a RemoteLinc. I want the 5 of the 6 buttons to control scenes. The scenes will manage the % brightness of two tracks of lights running on two SwtichLincs (v.38 item 2476D). I created 5 scenes. For brevity I'll talk about the "Scene A" and "Scene B" buttons.

 

They should work as follows:

1. When the "Scene A" both tracks should turn on at 100%.

2. When the "Scene B" one track should turn on at 30% and the other at 50%.

 

When I'm testing them, I'll use the "Scene B" button a couple times and then the "Scene A" button a couple times, they work properly. However sometimes the "Scene B" button will turn the tracks on to the 30%/50% and then very quickly set the "Scene A" button to "on" which seems to then turn the tracks on to 100%.

 

Just so you know, I had factory reset the SwitchLincs and RemoteLinc prior to adding them to my ISY99i. I put the log at this link: http://screencast.com/t/8IXeK0iA. Any ideas?

 

Thanks,

 

Steve

[LeeG]

SteveSBE

 

The RemoteLinc buttons cannot be turned On Programmatically. The RemoteLinc has no Responder capability and is likely asleep (although maybe not asleep in this scenario).

 

Suggest running Tools | Diagnostics | Event Viewer with Device communications events selected. Post the event log when Scene A turns On unexpectedly. I suspect there is a Scene A On coming from the RemoteLinc.

 

Lee