Jump to content
View in the app

A better way to browse. Learn more.
Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

TriggerLinc question

ahwman
in ISY994

Featured Replies

Posted

After installing and syncing a TriggerLinc device to my ISY, I noticed that there is a "Closed" and "Opened" entry for it. The strange part is that the status for both shows as "On". The "Opened" side seems to change with the opening/closing of the circuit however the "Closed" entry doesn't seems to change. Should I simply use the "Opened" entry and disregard the "Closed" one?

The TriggerLinc has an optional operating mode where two nodes are used. The Open node gets On indications, the Closed node gets Off indications. There is a single jumper on the TriggerLinc printed circuit board that controls the option. The TriggerLinc User Guide covers this alternate method.

 

Yes, using the Open node only is the normal approach. Don't know of anyone who uses a TriggerLinc in the alternate operating mode. May be useful where there is no intelligent controller but the second node is of no use when using an ISY.

Guest
This topic is now closed to further replies.
Go to topic listing

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.