mathewbeall Posted March 25, 2012 Posted March 25, 2012 Hi Folks, I thought this would work pretty easily w/o any programs. I have the fanlinc and the keypadlinc all hooked up. I have 4 scenes for the Fan (High, Med, Low, Off) and the respective keypadlinc button and the fanlinc-fan are part of the scenes. The scenes are then adjusted to High,Med,Low,Off. When I activate the scenes from ISY, everything works as expected. When I hit any of the KPL buttons (High, Med, Low, Off) the fan immediately goes to "On" - instead of the preset scene speed. That is the first problem - and then the next is going to be to make sure that only one of the Keypad Fan lights is on at any given time - but I think I can accomplish that with a program. Thanks in advance! Matt
LeeG Posted March 25, 2012 Posted March 25, 2012 Click on the KeypadLinc button name listed below the Scene name in the My Lighting tree. The Scene Name (PLM is Controller) has a unique set of Responder On Level values which can be different from the Responder On Level values when the Controller is a KeypadLinc button.
mathewbeall Posted March 25, 2012 Author Posted March 25, 2012 That was indeed an easy fix! I thought I looked there, but obviously not... Thanks for the quick response! Matt
Recommended Posts