flemingmike Posted April 12, 2012 Posted April 12, 2012 hi, i know this may not be the right place to ask, but has anyone ever had an issue with an inline dimmer making a light just flash on/off? i have it in a scene with a switch for controlling it from my wall. if i turn the light off, it stops blinking. if i turn it on, it just flashes again. any help is appreciated. thanks
flemingmike Posted April 12, 2012 Author Posted April 12, 2012 the last thing i did before this happened was i used a new remote control to send a hallway light on signal to a irlinc reciever. this worked. the hallway light is the one with the inline.
Michel Kohanim Posted April 12, 2012 Posted April 12, 2012 Hello flemingmike, By any chance do you have any KeypadLincs version 2A or 2D? With kind regards, Michel
LeeG Posted April 12, 2012 Posted April 12, 2012 Click on the Primary KeypadLinc node in the My Lighting tree. The second line of information displayed in the right pane shows the firmware level v.??. If it displays v.00 the KeypadLinc was not added using Auto Discover.
Michel Kohanim Posted April 12, 2012 Posted April 12, 2012 Hi flemingmike, Thank you. This rules out controller issues ... the only other possible scenario - based on our history - is that perhaps the load for your inlinelinc is too high. Or, it could be a defective inlinelinc. What's the frequency of on/off cycles? With kind regards, Michel
Brian H Posted April 12, 2012 Posted April 12, 2012 Regular incandescent bulbs being used? The InLineLinc Dimmer isn't powered through another switch is it?
blueman2 Posted April 13, 2012 Posted April 13, 2012 I had something similar happen with a particular brand of CFL bulbs.
flemingmike Posted April 14, 2012 Author Posted April 14, 2012 it turned out to be a defective dimmer.
Recommended Posts