blueman2 Posted April 19, 2012 Share Posted April 19, 2012 I am curious if it is possible to have a switchlinc not control its own load when turned on or off, but have its load controlled only by another switch? I assume not, but just had to ask. Link to comment
LeeG Posted April 19, 2012 Share Posted April 19, 2012 You are correct, it is not possible to separate the operation of the paddle from the load attached to the red wire. It is fine to not have a load attached to the red wire. Link to comment
Nuttycomputer Posted April 19, 2012 Share Posted April 19, 2012 Depending on what your trying to achieve, as LeeG said you can just not attach a load. And if you need to attach the load that was there you may be able to add one of these. http://www.smarthome.com/2475D/In-LineL ... mer/p.aspx Link to comment
blueman2 Posted April 19, 2012 Author Share Posted April 19, 2012 Thanks, guys. That is what I thought, but wanted to confirm. Link to comment
apostolakisl Posted April 19, 2012 Share Posted April 19, 2012 Or use a KPL to control multiple devices from the location. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.