ronny.kagstrom Posted September 4, 2012 Posted September 4, 2012 I have just purchased Smarthome appliancelinc-outdoor on/off module. I linked it to my KPL 8 button switch. I set up a scene on my ISY99 and linked button "G" on the KPL to the scene. I thought if I did that, I could turn on / off my outside string lights that are connected to the appliancelinc, but I am not able to do so. If I push "G" on the KPL I am able to turn on and off the light plugged in to the appliancelinc, but I am not able to do so using the PC. The KPL button "G" lights up when I used the PC to activate the scene but the lights connected to the appliancelinc does not turn on. Suggestions?
LeeG Posted September 4, 2012 Posted September 4, 2012 " I linked it to my KPL 8 button switch. " Was this the process of adding KPL button G to an ISY Scene as a Controller and the ApplianceLinc as a Responder to the ISY Scene. Or was this a Set button link between the KPL and the ApplianceLinc? What devices are being used for phase coupling?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.