roberthleeii

The zooz zen32 has leds (configurable so behavior be changed) for each of the 5 buttons and they are completely independent and only affected by the button is on. I feel like the zen32 only sends the on command but then I see that the led is kept in sync with on/off status....

is there a way to store variable's values if there is a power outage or you have to restart the ISY?

i am new to this so i have no idea what i am looking at here it is again with different settings on the event viewer: Wed 02/09/2022 05:22:10 PM : [ZWAVE-RX ZW019_1] [5B/03] Central Scene Notify key=4 act=0 (Press) seq=55 slow=T ACK,AUTO,EXPLORE From=0x13 Wed 02/09/2022 05:22:10 PM : [D2D EVENT ] Event [ZW019_201N004] [DON] [0] uom=0 prec=-1 Wed 02/09/2022 05:22:10 PM : [ZW019_201N004] DON 0 Wed 02/09/2022 05:22:10 PM : [ZWAVE-RX ZW019_1] [20/01] Basic Set val=0xFF ACK,AUTO,EXPLORE From=0x13 Wed 02/09/2022 05:22:10 PM : [ZWAVE-RX ZW019_1] [20/01] Basic Set val=0xFF ACK,AUTO,EXPLORE From=0x13 Wed 02/09/2022 05:22:10 PM : [ZWAVE-TE ] [26/01] Dimmer Switch Set val=0xFF rr=0xFF ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:10 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:10 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[0B0282C9CD63EE59] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:10 PM : [D2D EVENT ] Event [ZW019_1] [ST] [100] uom=78 prec=0 Wed 02/09/2022 05:22:10 PM : [ ZW019_1] ST 100 (uom=78 prec=0) Wed 02/09/2022 05:22:10 PM : [D2D EVENT ] Event [ZW019_1] [DON] [100] uom=78 prec=0 Wed 02/09/2022 05:22:10 PM : [ ZW019_1] DON 100 (uom=78 prec=0) Wed 02/09/2022 05:22:10 PM : [D2D EVENT ] Event [ZW019_1] [DON] [100] uom=78 prec=0 Wed 02/09/2022 05:22:10 PM : [ ZW019_1] DON 100 (uom=78 prec=0) Wed 02/09/2022 05:22:13 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [00] ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:13 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:13 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[0140974BA398095F] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:13 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:13 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:13 PM : [ZWAVE-RD ] [010B001312043304000025000F] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:14 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [01] ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:14 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:14 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[6AC2595D67001974] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:14 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:14 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:14 PM : [ZWAVE-RD ] [010B0013120433040100250012] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:14 PM : [ZWAVE-RD ] [010B0013120433040100250013] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:14 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:14 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:14 PM : [ZWAVE-RD ] [010A00131203260363250067] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:14 PM : [D2D EVENT ] Event [ZW018_1] [ST] [100] uom=51 prec=0 Wed 02/09/2022 05:22:14 PM : [ ZW018_1] ST 100 (uom=51 prec=0) Wed 02/09/2022 05:22:14 PM : [D2D-CMP 0007] STS [ZW018_1] ST op=6 Event(val=100 uom=51 prec=0) != Condition(val=0 uom=51 prec=0) --> true Wed 02/09/2022 05:22:14 PM : [D2D-CMP 0003] STS [ZW018_1] ST op=1 Event(val=100 uom=51 prec=0) is Condition(val=0 uom=51 prec=0) --> false Wed 02/09/2022 05:22:15 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:15 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:15 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[CA8AC516CBEA0A65] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:15 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:15 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:15 PM : [ZWAVE-RD ] [010B0013120433040200250016] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:15 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [03] ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:15 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:15 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[52DB4E249F4AEAE2] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:15 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:15 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:16 PM : [ZWAVE-RD ] [010B001312043304030025001B] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:16 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [04] ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:16 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:16 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[5E770BD204107CDD] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:16 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:16 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:16 PM : [ZWAVE-RD ] [010B00131204330404FF2500E7] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:16 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:16 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:16 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[6E14F0238131D1C7] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:17 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:17 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:17 PM : [ZWAVE-RD ] [010A0013120326036325007A] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:20 PM : [ZWAVE-RX ZW019_1] [5B/03] Central Scene Notify key=4 act=0 (Press) seq=56 slow=T ACK,AUTO,EXPLORE From=0x13 Wed 02/09/2022 05:22:20 PM : [D2D EVENT ] Event [ZW019_201N004] [DON] [0] uom=0 prec=-1 Wed 02/09/2022 05:22:20 PM : [ZW019_201N004] DON 0 Wed 02/09/2022 05:22:20 PM : [ZWAVE-RX ZW019_1] [20/01] Basic Set val=0x00 ACK,AUTO,EXPLORE From=0x13 Wed 02/09/2022 05:22:20 PM : [ZWAVE-TE ] [26/01] Dimmer Switch Set val=0xFF rr=0xFF ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:20 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:20 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[988423DD78482FB0] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:20 PM : [D2D EVENT ] Event [ZW019_1] [ST] [0] uom=78 prec=0 Wed 02/09/2022 05:22:20 PM : [ ZW019_1] ST 0 (uom=78 prec=0) Wed 02/09/2022 05:22:20 PM : [D2D EVENT ] Event [ZW019_1] [DOF] [0] uom=78 prec=0 Wed 02/09/2022 05:22:20 PM : [ ZW019_1] DOF 0 (uom=78 prec=0) Wed 02/09/2022 05:22:23 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [00] ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:23 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:23 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[3A10F2C6D2550EFB] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:24 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:24 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:24 PM : [ZWAVE-RD ] [010B0013120433040000250017] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:24 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [01] ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:24 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:24 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[1607BF3687074BB4] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:24 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:24 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:24 PM : [ZWAVE-RD ] [010B001312043304010025001A] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:25 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:25 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:25 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[39B24DA1F0D50F9C] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:25 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:25 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:25 PM : [ZWAVE-RD ] [010B001312043304020025001D] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:25 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [03] ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:25 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:25 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[B0BB15F5C2EADC07] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:25 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:25 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:26 PM : [ZWAVE-RD ] [010B001312043304030025000B] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:26 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [04] ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:26 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:26 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[5FEA933E0591C783] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:26 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:26 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:26 PM : [ZWAVE-RD ] [010B00131204330404FF2500F7] REQ ZW_SEND_DATA Wed 02/09/2022 05:22:27 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:27 PM : [ZWAVE-TX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x12 Wed 02/09/2022 05:22:27 PM : [ZWAVE-RX ZW018_1] [98/80] Security Nonce Report - nonce=[B8378F8E9C4600A2] ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:27 PM : [ZWAVE-RX ZW018_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x12 Wed 02/09/2022 05:22:27 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:22:27 PM : [ZWAVE-RD ] [010A00131203260363250067] REQ ZW_SEND_DATA

this is the log for my scene that turns the light on but not off: Wed 02/09/2022 05:19:58 PM : [D2D EVENT ] Event [ZW019_201N004] [DON] [0] uom=0 prec=-1 Wed 02/09/2022 05:19:58 PM : [ZW019_201N004] DON 0 Wed 02/09/2022 05:19:58 PM : [D2D EVENT ] Event [ZW019_1] [DON] [100] uom=78 prec=0 Wed 02/09/2022 05:19:58 PM : [ ZW019_1] DON 100 (uom=78 prec=0) Wed 02/09/2022 05:20:01 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:02 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:02 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:02 PM : [D2D EVENT ] Event [ZW018_1] [ST] [100] uom=51 prec=0 Wed 02/09/2022 05:20:02 PM : [ ZW018_1] ST 100 (uom=51 prec=0) Wed 02/09/2022 05:20:02 PM : [D2D-CMP 0007] STS [ZW018_1] ST op=6 Event(val=100 uom=51 prec=0) != Condition(val=0 uom=51 prec=0) --> true Wed 02/09/2022 05:20:02 PM : [D2D-CMP 0003] STS [ZW018_1] ST op=1 Event(val=100 uom=51 prec=0) is Condition(val=0 uom=51 prec=0) --> false Wed 02/09/2022 05:20:03 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:03 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:04 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:05 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:12 PM : [D2D EVENT ] Event [ZW019_201N004] [DON] [0] uom=0 prec=-1 Wed 02/09/2022 05:20:12 PM : [ZW019_201N004] DON 0 Wed 02/09/2022 05:20:13 PM : [D2D EVENT ] Event [ZW019_1] [ST] [0] uom=78 prec=0 Wed 02/09/2022 05:20:13 PM : [ ZW019_1] ST 0 (uom=78 prec=0) Wed 02/09/2022 05:20:13 PM : [D2D EVENT ] Event [ZW019_1] [DOF] [0] uom=78 prec=0 Wed 02/09/2022 05:20:13 PM : [ ZW019_1] DOF 0 (uom=78 prec=0) Wed 02/09/2022 05:20:16 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:17 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:17 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:18 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:19 PM : [ZWAVE-TX ] ... Wed 02/09/2022 05:20:19 PM : [ZWAVE-TX ] ...

is there a list of all the node servers and a general idea of what they do or connect to? (are the sublinks on the forum the only list?) I am thinking about getting a polisy and am curious about all that is available out there before I commit that much money...

there is some real power with the programming. I am now thinking about buying a POLISY now to get more devices in my control network but that is a big expense ?‍♂️

I am sorry but I don't see that. Tried looking all over in the scene and the controller in the scene and was not able to find a dropdown with that text. The scene will turn on the z-wave light I am using and the scene light on the controller will show the scene is active, but when press the scene button again the light on the controller shows the scene going off but the light stays on. this is the first z-wave controller I have really played with and have only used some insteon ones before and it does not seem to work the same. On the other hand i really have liked playing with the programing aspect of ISY

Thank you!!!

Thank you. I think I am going to look into Hue it seems like it will be my easiest way to go and accomplish what need to. Can you point me to where i can learn about the network resources you mention. I don't really understand what that is... I am a newbie still.

thank you for your response! I have a question that is probably very stupid (sorry in advance): to run the Hue node server i have to have a Polisy at my house? I still don't have an understanding of the node server integrations... ?‍♂️ Follow up questions on the Magic home bulbs, those look to be wifi, how does that connect to ISY? (node server too?) Don't wifi bulbs clog up your wifi? I already have too many wifi devices connected to my network.

Any recommendations for smart light bulbs I can control from my ISY. I have been using Inovelli z-wave light bulbs with success but would like to know if there are any other options available and worth looking at. Also i need an option for the smaller light bulbs (?e12? / ?candelabra? style). I would love to use zigbee but that does not seem to be an easy option with the ISY ? any responses are appreciated. Thank you in advance, Robert

This does not seem to work. I have figured out how to get it basically working with the programming and changing the parameters of the LEDs within the program ?‍♂️ I guess this is good enough.

I have played a little more with this and have gotten it to work... kind of... I wrote two programs to control it but the lights on the keypad would not always be guaranteed to be in sync.... Test bulb on - [ID 0003][Parent 0004] If 'ZW 019 Binary Switch / ZW 019 Scene Button 2' is switched On And 'Ilumin test bulb' Status is Off Then Set 'Ilumin test bulb' Fast On Else - No Actions - (To add one, press 'Action') Test bulb off - [ID 0007][Parent 0004] If 'ZW 019 Binary Switch / ZW 019 Scene Button 2' is switched On And 'Ilumin test bulb' Status is not Off Then Set 'Ilumin test bulb' Fast Off Else - No Actions - (To add one, press 'Action') I doubt this is the best way to do this

I recently installed the Zooz Zen32 scene controller in my house. I would like to use more of these because i like the ability to decouple the control from the main button and the ability to control multiple scenes from the controller but i cannot seem to figure out how to program it. I am a beginner at ISY but I can't seem to figure this controller out. I have the on/off of the main switch/relay down, it works fine but the scene control buttons have issues. I can get them to turn on scenes but not off (in both scenes and programs). It seems there is no off event that ISY recognizes. i can make it where i set 2 buttons to control a scene (one on, one off) but that leads to needing double presses on the buttons witch can get annoying and that uses 2 buttons where 1 should work. Please help. Again I am not very experienced and maybe missing something simple or just going about this the completely wrong way ?‍♂️ Thanks in advance, Robert

what is the easiest way to be able to control zigbee with my ISY? I really would like to be able to get a lot of zigbee light bulbs and other items.

I have a room that has a fan with light and a second light fixture all on one wall switch. i am wanting to control both separately. I ordered an insteon fanlinc for the fan and its attached light and the ENERWAVE Z-Wave Plus Relay, Hidden Smart Switch Wireless Remote Control https://www.amazon.com/gp/product/B01G7OD1F8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 for the second light. Will this work. I thought it could be put in the light box or the switch box but the instructions only reference putting it on the switch. Any help wiring it in the box or another option would be appreciated.

I have an isy in my main house but want to add some control to a couple other buildings on my property. I have power run to a barn, shed, and guest house from my breaker box on my main house. Will this be enough to carry the signal to communicate with my other buildings if I add some wired insteon outlets and devices?

Thank you, that makes a lot of sense. I knew i should have just bought the on/off switch.

I am new to insteon and ISY so I am sorry if this is a simple newbie error. I have some LED light strips plugged in to the wall that light under a cabinet. I connected them to an Insteon dimmer module to try and control them but when i plug the LED strip in the module continuously turns on and off. It works fine on a normal lamp around the house. Thanks in advance Robert