EWhite

How about the Seeed Studios Human Detection Sensor Kit? https://www.amazon.com/mmWave-Human-Detection-Sensor-Kit/dp/B0CLDHZWV8/ref=sr_1_2?crid=1J0CY049L4L97&keywords=seeed+human&qid=1700578955&sprefix=seeed+human%2Caps%2C176&sr=8-2 I have got all the info i will post later of how i got tasmota on it, and all the info needed to make it work to this point. including the template that works, and the modified Berry Driver. I am monitoring it in MQTT Explorer and its working great so far, just no way at the moment to get that info into my Polisy. EVERYONE is wanting to do Human Detection. and so far i am very impressed by this unit.

I think someone is working on a RATGDO nodeserver...

from what i can tell HA devices use MQTT in a different way from Tasmota. atleast from what i can tell using MQTT sniffer

in the process of creating a node server for this.. why not make it work with ALL HA MQTT messages... im vert surprised we dont have this already. after playing with this and a few other HA compatible devices, the MQTT stuff is the same from all of them, just a slightly different format from tasmota standard MQTT. just a thought....might open up alot of new devices, might not... just tested HA automation on shelly modules...MQTT is all there...just like for the ratgdo...

just saw an article where you can get a tuya m100 presence sensor and change out a chip in it and load Tasmota on it. https://templates.blakadder.com/ZY-M100.html for the template and how-to... It then spits out home assistant MQTT info. would be nice to have a HA nodeserver to handle it.. hehe

one per...

im thinking you would have to do that via a program....would be fairly easy Since the ratgdo can control lights and etc..add a beeper of some kind if you want.. I dont have any young kids around anymore...so i aint too worried about that.

i ordered a few... Just FYI.. you can install the firmware on any wemos d1 mini....so you could play with it, etc. I did it.. of course it wont work or anything without the daughter board, but it gives you all the MQTT stuff for maybe building a node server.

the more i see posted on this ratgdo the more im liking it...love the idea of getting away from the "cloud" and having local control. What is the time frame on the backorder for these?

i just installed from non production store....i dunno why it isnt working.. above my paygrade

https://www.amazon.com/HiLetgo-NodeMcu-Development-ESP8266-Compatiable/dp/B073CQVFLK/ref=sr_1_1_sspa?crid=2CFR7T6HQCY92&keywords=wemos+d1+mini&qid=1698341117&sprefix=wemos%2Caps%2C233&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1 for the wemos board and : https://www.amazon.com/AM2302-Shield-Digital-Temperature-Humidity/dp/B0982C8F8P/ref=sr_1_3?crid=1AYBRH1CB7ZU1&keywords=wemos+d1+dht22&qid=1698341285&sprefix=wemos+d1+dht22%2Caps%2C133&sr=8-3 for the temp sensor... google tells you how to set up the wemos to monitor voltage, have to use a couple resistors to step it down. my chickens love their "smart coop" hehehe

im using the MQTT beta node server and a WEMOS D1 Mini with tasmota on it to give me exact voltage readings. Works great after a few tweaks to the node server that got done. here is entire thread on it...

im using MQTT for a few things now..just didnt on this item since there was a node server for it.. that i thought worked.. it does work.. just doesnt report right..so i cant do anything'with it programmatically I will have to pull it out of the wall and flash tasmota on it, was just trying to not have to do that. Thanks!

yea.. i guess thats what im gonna have to do.. i have to pull it out of wall to do it tho. Thanks

no activity on this for over a year...i guess its dead? shame... is there any way i can change it, or can i pay someone to? Thanks

thanks much guys.. i will hollar at him on github and go from there.

my other post on this got closed with no explanation...so here it goes again.. Just tried the shelly1 version 2 with latest firmware. The webserver does not parse a status xml anymore.....or am i missing something? the node server is trying to go to http://shelly_ip/status this does not exist....so node server cannot report status of switch. it DOES however still control the switch. 2023-07-18 21:46:07,513 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING shortPoll 2023-07-18 21:46:07,515 Thread-691 udi_interface DEBUG Shelly1_Node:updateStatuses: Node: updateStatuses() called for SHELLY1_80646FDA9E38 (s1921681030) 2023-07-18 21:46:07,543 Thread-691 udi_interface ERROR Shelly1_Node:updateStatuses: Node: updateStatuses: 404, message='Not Found', url=URL('http://192.168.10.30/status') 2023-07-18 21:46:12,609 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message shortPoll the update status needs to be updated to support the newer firmwares... found this after digging on shelly website.... http://shelly_ip/rpc/Shelly.GetStatus is what it need to be to get xml parsed info..... please..

AWESOME job buddy! that did it.. thanks much!

ok.. last complaint.. for now.. hehehe It shows that i have version .11 beta, and keeps asking me to update, but i have.. obviously its working now.. it just keeps showing to upgrade to .12 beta, is there a versioning miss somewhere? could it be just that te store is wrong? or PG#x is fubar?..just curious.. i have one other node doing the same thing..its on the latest and greatest, just doesnt know it for some reason.

yes.. its working great so far! Thank you!

nevermind.. im an idiot....forgot to restart the AC...

ok.. i may have screwed up.. i didnt remove nodes in this before when updating... i did this time to fresh start . problem is analog is not working at all..showing a status of false with a reading of 0 maybe its a configuration problem? what the config line for what you have above?

yes.. i was...the max of 1024. When in actuality the voltage(range) was 1280 to 1420 (lithium battery)

no problemo! Thanks!

bug bug....hope you had a good vacay!