PB11

Not Critical. I hadn't realized ISY could do first day of the month. Hadn't seen this as an option. Will research all the above. Thanks everyone.

No conditions on folders. I had started with the state variable but couldn't figure out the date +1. I'll revisit this. 750 hours was the only way i could figure out the 30 day equivalent. Thanks @gzahar

Hi All, and good morning. I have some batteries that need to be charged every thirty days. I have them plugged into an insteon switch and 2 programs that are meant to trigger them. First program "Robot Charging" is just a "then" which turns on the outlets, charges 3 hours, then turns off. Second program "Robot Timer" is an "If" that triggers "Robot Charging" program. Its not working. Even in the summary windows, it shows last run and next run if I manually kick on the "Robot Charging" but then nothing happen on the next scheduled event. If I reboot the isy, am I losing the "next scheduled event"? It seems all fields are empty after reboot. Any thoughts would be appreciated. Robot Charging - [ID 005A][Parent 0059][Run At Startup] If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then Set 'Garage / Robot Outlets / Robot Outlet.1 On-Off Top' On Set 'Garage / Robot Outlets / Robot Outlet.2 On-Off Bot' On Send Notification to 'Lake House' content 'Robot Charging on' Wait 3 hours Set 'Garage / Robot Outlets / Robot Outlet.1 On-Off Top' Off Set 'Garage / Robot Outlets / Robot Outlet.2 On-Off Bot' Off Send Notification to 'Lake House' content 'Robot Charging Off' Else - No Actions - (To add one, press 'Action') Robot Timer - [ID 0058][Parent 0059][Run At Startup] If Time is Last Run Time for 'Robot Charging' + 750 hours Then Run Program 'Robot Charging' (Then Path) Else - No Actions - (To add one, press 'Action')

Hello All Wondering if/how I can bring up a window to watch what's currently happening on my isy. I know I can go into the Program window and look at the "Summary Tab", but wondering if there is an interface from which i can see what type of back log there may be. Thanks in advance PB

Is there a number for these links and how do I know if I've exceeded this number? I'm seeing this error in my Summary tab.

@larryllixSo far, my biggest issue is response time of a program triggered by MS.

Ah, thanks. I've just purchased 2 MS over the holidays, but am only just dabbling as I'm struggling to understand their usage value and how to utilize their data fields.

Where's the fun in that? Can I ask what you mean by MS?

so better if I simply change the state of a program at one moment ie 11pm with 10 seconds between each line of code. Rather then "If between 11pm and sunrise"? Then at sunrise run a program change scene back to default?

Right, I usually do this, but only for much longer changes i.e house wide backlight changes. Thanks, will make these changes. Better approach?

@larryllixk, so previously I have used this approach, but this is when I found the condition, i.e lighting level would come on at one level then very quickly apply "then" changing to appropriate lighting levels. I thought if I simply changed the scene state at a fixed point in time it would avoid this issue.

I am indeed trying to adjust scene. I have found if I simply change the settings of a node between a period of time, the results are my lights turn on at one level then quickly adjust to the corresponding active program. Here's one of the programs I'm wanting to confirm. The hope is as the day progresses into night, I have one level of lighting during wake hours, and a much dimmer light leveling during the wee hours. At the end of the wee hours program (i.e daylight) the light levels return to much higher levels. Guest Wing Wee Hours - [ID 0021][Parent 0053] If From 11:00:00PM To Sunrise (next day) Then In 'Hallway / Hallway' Set 'Hallway / Hallway Lights East' To 20% in 0.1 seconds In 'Hallway / Hallway' Set 'Hallway / Hallway Lights Mid' To 20% in 0.1 seconds In 'Hallway / Hallway' Set 'Hallway / Hallway Lights West' To 20% in 0.1 seconds In 'Guest Bathroom / Guest Vanity' Set 'Guest Bathroom / Guest Bathroom Vanity' To 15% in 0.1 seconds In 'Peter's Office / Peter's Office' Set 'Peter's Office / Peters Office Lights' To 35% in 0.1 seconds In 'Guest Bedroom / Guest Lights' Set 'Guest Bedroom / Guest Bedroom Lights' To 35% in 0.1 seconds In 'Back door / Backdoor' Set 'Back door / Hallway Bank / Backdoor Lights' To 35% in 0.1 seconds In 'Back door / Backdoor' Set 'Back door / Backdoor Lights' To 35% in 0.1 seconds Else In 'Hallway / Hallway' Set 'Hallway / Hallway Lights East' To default In 'Hallway / Hallway' Set 'Hallway / Hallway Lights Mid' To default In 'Hallway / Hallway' Set 'Hallway / Hallway Lights West' To default In 'Guest Bathroom / Guest Vanity' Set 'Guest Bathroom / Guest Bathroom Vanity' To default In 'Peter's Office / Peter's Office' Set 'Peter's Office / Peters Office Lights' To default In 'Guest Bedroom / Guest Lights' Set 'Guest Bedroom / Guest Bedroom Lights' To default In 'Back door / Backdoor' Set 'Back door / Hallway Bank / Backdoor Lights' To default In 'Back door / Backdoor' Set 'Back door / Backdoor Lights' To default

Hi @larryllix by the above do you mean it will affect any other programs which have the same nodes? So for example, If i have a "dim program" that sets the hallway to 30% after 8pm, and I have an "arriving home geofence program" that turns on the hallway between 6pm and 11pm, then after 8pm the "arriving home program" will also fall under the "dim program" resulting in my geofence hallway program turning on the lights to 30%?

Hi All Just looking for some clarification. In my program I have If between 10pm and sunrise Then Set scene to this Else Set the scene to default. Can I assume at the end of the If time, i.e at sunrise, my scene will return to the default settings? The cookbook states "• The THEN statement will run when the program is TRUE. • The ELSE statement will run when the program becomes FALSE." So I assume when the if is not longer true the status is false. Correct?

Is this the same as repair links?

Don't see the luminance either. Is there somewhere I can research the purpose and definition of these fields? Just not getting how to bring them into play ie scenes or programs 87773733_MotionSensor.MP4

Hi @larryllix Is this the location you are referring to? When I click on it it simply takes me to the device, but no further information.

I'm struggling to understand what each of the 3 components are created when I link something like a motion sensor. How can these be utilized in scenes or programming and why do they all have the same fields under the "options" tab? I would like to try to tray their heartbeat. It was suggested using the dusk and dawn component, but I don't see either when I link this device. I really don't even understand how I would use it as a motion trigger as I don't see a variable that acknowledges or changes with motion.

Is there somewhere i can research for the purpose and definition of these fields?

Here's what one of my motion sensor looks like with clean install. How do i know which is the light sensor?

There is a post "motion sensor heartbeat" by @metal450 with a bit of info on programming. Control Sensor-Dusk.Dawn is switched on OR Control Sensor-Dusk.Dawn is switched off I'm unclear what the switched on and switched off means. Is this the sensor detecting motion?

I think @larryllix meant the writes icon at the top of the admin console. It turns off the auto writes.

Wondering if any one can help me understand the motion sensor makeup. I had assumed that much like a leak sensor (battery) there would be a heartbeat associated with the motion sensor. I embedded what I assumed it must be but the program from @belias which tracks the battery for the leak sensor isn't sending what I would expect for the motion sensor. Am I wrong in assuming there is a heartbeat for the motion sensor?

Control seems to be working. Thanks for the pointers. I don't understand why Status wouldn't work in this instance. Not sure I understand its purpose.

each of these dimmers is stand alone. I'll give control a try to see if that works. I had read in another archived post that status was preferred for the following "When using control, this program will only trigger when the switch in manually operated and, in this case, only when turned on specifically rather than fast on or fade up. Status will catch the change in status regardless of how it gets that way - even if the switch is turned on remotely by a linked device or scene.