jaycanter

my event viewer was showing about every 30 seconds setting time which has had an exclamation point in front of it as long as i havn't had remote access. so i set the isy to auto dhcp still would not work. downgraded to 2.8.10 and bingo now everything is working. i have my time back and my remote access but lost a lot of changes to devices and programs.

Just went thru the router and no conflicts on the ports. i am still getting an error for ntp server error when i try to synchronize time? i have a red exclamation point in front of the ntp server. while were on the subject on ports, can anyone explain how come if i change the port from default on the isy it seems to disappear? no matter what i set it for it does want to show on the network and i have to jump thru hoops to get it back.

Last month i finally learned how to do port forwarding. and access my security camera server, i then set up my isy to access remotely and had no problems. I was last in remotely friday, well today tried to go in and it won't work. it says http 404 not found rechecked my router and shows in the logs the connection and to rout it but nothing happens. the isy is set for a static ip and is still the same. my cameras still work and the isy works from my network just not remotely and i set to enable internet access and checked the address. also the NTP server will not synchronize it errors.

Hi Michel, after hrs of mine acting up 1/2 the day i did a factory reset and like GeorgeRufle & jsandlin. after several attemps had to hold the button over 20 seconds. reloaded latest backup and am now running fine. the about says it's 2.8.12 even though i restored 2.8.11 back up. is that right?

Mines doing the same thing had to unplug it then it's there when i opened admin console it didn't show the status then after a min it started checking and showing up. i have had to reset 3 times this moring to find it on the network

heres event viewer log for the brulech the 1st 1 was 3 sec 2nd was 4 sec and the last was 5 sec Thu 01/27/2011 08:34:17 AM : MOD-EM-BRULTECH: Connecting to http://xxx.xxx.x.xxx:xxxx Thu 01/27/2011 08:34:20 AM : MOD-EM-BRULTECH: Successfully Processed Response Thu 01/27/2011 08:34:20 AM : [MOD 3 3 1 2] 1701.500000 Electricity - Channel 1 - Power = 1701.500 Watts Thu 01/27/2011 08:34:20 AM : [MOD 3 3 1 5] 1701.500000 Electricity - Channel 1 - Polarized Power = 1701.500 Watts Thu 01/27/2011 08:34:20 AM : [MOD 3 3 1 3] 332.658000 Electricity - Channel 1 - Energy Usage = 332.658 kWh Thu 01/27/2011 08:34:20 AM : [MOD 3 3 1 6] 12.460000 Electricity - Channel 1 - Current = 12.46 Amps Thu 01/27/2011 08:34:20 AM : [MOD 3 3 2 2] 718.700000 Electricity - Channel 2 - Power = 718.700 Watts Thu 01/27/2011 08:34:20 AM : [MOD 3 3 2 5] 718.700000 Electricity - Channel 2 - Polarized Power = 718.700 Watts Thu 01/27/2011 08:34:20 AM : [MOD 3 3 2 3] 133.521000 Electricity - Channel 2 - Energy Usage = 133.521 kWh Thu 01/27/2011 08:34:20 AM : [MOD 3 3 2 6] 5.160000 Electricity - Channel 2 - Current = 5.16 Amps Thu 01/27/2011 08:34:20 AM : [MOD 3 3 3 2] 142.400000 Electricity - Channel 3 - Power = 142.400 Watts Thu 01/27/2011 08:34:20 AM : [MOD 3 3 4 2] 124.300000 Electricity - Channel 4 - Power = 124.300 Watts Thu 01/27/2011 08:34:20 AM : [MOD 3 3 5 2] 0.300000 Electricity - Channel 5 - Power = 0.300 Watts Thu 01/27/2011 08:34:20 AM : [MOD 3 3 6 2] 506.200000 Electricity - Channel 6 - Power = 506.200 Watts Thu 01/27/2011 08:34:20 AM : [MOD 3 3 6 3] 75.243000 Electricity - Channel 6 - Energy Usage = 75.243 kWh Thu 01/27/2011 08:34:20 AM : [MOD 3 3 7 2] 129.900000 Electricity - Channel 7 - Power = 129.900 Watts Thu 01/27/2011 08:34:27 AM : MOD-EM-BRULTECH: Connecting to http://xxx.xxx.x.xxx:xxxx Thu 01/27/2011 08:34:31 AM : MOD-EM-BRULTECH: Successfully Processed Response Thu 01/27/2011 08:34:31 AM : [MOD 3 3 1 2] 1697.273000 Electricity - Channel 1 - Power = 1697.273 Watts Thu 01/27/2011 08:34:31 AM : [MOD 3 3 1 5] 1697.273000 Electricity - Channel 1 - Polarized Power = 1697.273 Watts Thu 01/27/2011 08:34:31 AM : [MOD 3 3 1 3] 332.663000 Electricity - Channel 1 - Energy Usage = 332.663 kWh Thu 01/27/2011 08:34:31 AM : [MOD 3 3 1 6] 12.280000 Electricity - Channel 1 - Current = 12.28 Amps Thu 01/27/2011 08:34:31 AM : [MOD 3 3 2 2] 712.455000 Electricity - Channel 2 - Power = 712.455 Watts Thu 01/27/2011 08:34:31 AM : [MOD 3 3 2 5] 712.455000 Electricity - Channel 2 - Polarized Power = 712.455 Watts Thu 01/27/2011 08:34:31 AM : [MOD 3 3 2 3] 133.523000 Electricity - Channel 2 - Energy Usage = 133.523 kWh Thu 01/27/2011 08:34:31 AM : [MOD 3 3 2 6] 4.990000 Electricity - Channel 2 - Current = 4.99 Amps Thu 01/27/2011 08:34:31 AM : [MOD 3 3 3 2] 141.909000 Electricity - Channel 3 - Power = 141.909 Watts Thu 01/27/2011 08:34:31 AM : [MOD 3 3 3 3] 41.744000 Electricity - Channel 3 - Energy Usage = 41.744 kWh Thu 01/27/2011 08:34:31 AM : [MOD 3 3 4 2] 124.364000 Electricity - Channel 4 - Power = 124.364 Watts Thu 01/27/2011 08:34:31 AM : [MOD 3 3 4 3] 29.884000 Electricity - Channel 4 - Energy Usage = 29.884 kWh Thu 01/27/2011 08:34:31 AM : [MOD 3 3 5 2] 0.182000 Electricity - Channel 5 - Power = 0.182 Watts Thu 01/27/2011 08:34:31 AM : [MOD 3 3 6 2] 509.273000 Electricity - Channel 6 - Power = 509.273 Watts Thu 01/27/2011 08:34:31 AM : [MOD 3 3 6 3] 75.245000 Electricity - Channel 6 - Energy Usage = 75.245 kWh Thu 01/27/2011 08:34:31 AM : [MOD 3 3 7 2] 130.000000 Electricity - Channel 7 - Power = 130.000 Watts Thu 01/27/2011 08:34:37 AM : MOD-EM-BRULTECH: Connecting to http://xxx.xxx.x.xxx:xxxx Thu 01/27/2011 08:34:42 AM : MOD-EM-BRULTECH: Successfully Processed Response Thu 01/27/2011 08:34:42 AM : [MOD 3 3 1 2] 62318692.000000 Electricity - Channel 1 - Power = 62318692.000 Watts Thu 01/27/2011 08:34:42 AM : [MOD 3 3 1 5] 62318848.000000 Electricity - Channel 1 - Polarized Power = 62318848.000 Watts Thu 01/27/2011 08:34:42 AM : [MOD 3 3 1 3] 3.759000 Electricity - Channel 1 - Energy Usage = 3.759 kWh Thu 01/27/2011 08:34:42 AM : [MOD 3 3 1 6] 0.140000 Electricity - Channel 1 - Current = 0.14 Amps Thu 01/27/2011 08:34:42 AM : [MOD 3 3 1 4] 122.200000 Electricity - Channel 1 - Voltage = 122.20 volts Thu 01/27/2011 08:34:42 AM : [MOD 3 3 2 2] 25289840.000000 Electricity - Channel 2 - Power = 25289840.000 Watts Thu 01/27/2011 08:34:42 AM : [MOD 3 3 2 5] 25299098.000000 Electricity - Channel 2 - Polarized Power = 25299098.000 Watts Thu 01/27/2011 08:34:42 AM : [MOD 3 3 2 3] 0.049000 Electricity - Channel 2 - Energy Usage = 0.049 kWh Thu 01/27/2011 08:34:42 AM : [MOD 3 3 2 6] 0.090000 Electricity - Channel 2 - Current = 0.09 Amps Thu 01/27/2011 08:34:42 AM : [MOD 3 3 2 4] 122.200000 Electricity - Channel 2 - Voltage = 122.20 volts Thu 01/27/2011 08:34:42 AM : [MOD 3 3 3 2] 7849532.000000 Electricity - Channel 3 - Power = 7849532.000 Watts Thu 01/27/2011 08:34:42 AM : [MOD 3 3 3 3] 0.316000 Electricity - Channel 3 - Energy Usage = 0.316 kWh Thu 01/27/2011 08:34:42 AM : [MOD 3 3 3 4] 122.200000 Electricity - Channel 3 - Voltage = 122.20 volts Thu 01/27/2011 08:34:42 AM : [MOD 3 3 4 2] 5660778.000000 Electricity - Channel 4 - Power = 5660778.000 Watts Thu 01/27/2011 08:34:42 AM : [MOD 3 3 4 3] 0.007000 Electricity - Channel 4 - Energy Usage = 0.007 kWh

i have a EP-1 EtherPort Ethernet to RS-232 Gateway thats hardwired to the router. am also running the brultech software engine g that forwards my data to google power meter, and saving the usage to a database on my computer

the program is turning on 2 lights in a scene then waiting 7 mins and turning off unless theres motion withing the 7 mins.

13.ed.1a is laundry room ms i think the scene is outside lighting at sunset which is close to that time last run time is 5:35 and everything else in last run time is a least 1/2 or more before or after that time period. the motion sensor 14.1b.2e is outside and is also set to send dusk/ dawn commands. the program is set for either the motion sensor or sunset time to trigger which ever comes first.

I had cleared the event viewer and was checking email and the error came up again so i saved and pasted here. sorry for so much but it ran the time alot and don't know why. the 14.1b.2e is the ms which is not linked to anything it runs a program after 10pm to sunrise Wed 01/26/2011 05:04:38 PM : [ 14 1B 2E 1] DON 1 Wed 01/26/2011 05:04:38 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01) Wed 01/26/2011 05:04:38 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 05:04:38 PM : Duplicate: ignored Wed 01/26/2011 05:04:38 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01): Process Message: failed Wed 01/26/2011 05:04:38 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 05:04:38 PM : [iNST-SRX ] 02 50 14.1B.2E 13.24.88 41 11 01 LTONRR (01) Wed 01/26/2011 05:04:38 PM : [standard-Cleanup][14.1B.2E-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Wed 01/26/2011 05:04:54 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C3 11 01 LTONRR (01) Wed 01/26/2011 05:04:54 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=0 Wed 01/26/2011 05:04:54 PM : [ 14 1B 2E 1] DON 1 Wed 01/26/2011 05:04:54 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01) Wed 01/26/2011 05:04:54 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 05:04:54 PM : Duplicate: ignored Wed 01/26/2011 05:04:54 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01): Process Message: failed Wed 01/26/2011 05:04:54 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 05:04:54 PM : [iNST-SRX ] 02 50 14.1B.2E 13.24.88 41 11 01 LTONRR (01) Wed 01/26/2011 05:04:54 PM : [standard-Cleanup][14.1B.2E-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Wed 01/26/2011 05:05:03 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01) Wed 01/26/2011 05:05:03 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 05:05:03 PM : [ 14 1B 2E 1] DON 1 Wed 01/26/2011 05:05:04 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01) Wed 01/26/2011 05:05:04 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 05:05:04 PM : Duplicate: ignored Wed 01/26/2011 05:05:04 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01): Process Message: failed Wed 01/26/2011 05:05:04 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 05:05:04 PM : [iNST-SRX ] 02 50 14.1B.2E 13.24.88 41 11 01 LTONRR (01) Wed 01/26/2011 05:05:04 PM : [standard-Cleanup][14.1B.2E-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Wed 01/26/2011 05:06:10 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:10 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:10 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:10 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:10 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:10 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:10 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:10 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:10 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:10 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:11 3(0) Wed 01/26/2011 05:06:11 PM : [ Time] 17:06:12 3(0) Wed 01/26/2011 05:14:15 PM : MOD-EM-BRULTECH: Connecting to http://192.168.1.106:8083 Wed 01/26/2011 05:14:20 PM : MOD-EM-BRULTECH: Read Acknowledge Failed Wed 01/26/2011 05:16:11 PM : [ Time] 17:16:12 3(0) Wed 01/26/2011 05:23:20 PM : [iNST-SRX ] 02 50 13.ED.1A 00.00.01 CB 11 01 LTONRR (01) Wed 01/26/2011 05:23:20 PM : [standard-Group][13.ED.1A-->Group=1] Max Hops=3, Hops Left=2 Wed 01/26/2011 05:23:20 PM : [ 13 ED 1A 1] DON 1 Wed 01/26/2011 05:23:20 PM : [iNST-SRX ] 02 50 13.ED.1A 00.00.01 CB 11 01 LTONRR (01) Wed 01/26/2011 05:23:20 PM : [standard-Group][13.ED.1A-->Group=1] Max Hops=3, Hops Left=2 Wed 01/26/2011 05:23:20 PM : Duplicate: ignored Wed 01/26/2011 05:23:20 PM : [iNST-SRX ] 02 50 13.ED.1A 00.00.01 CB 11 01 LTONRR (01): Process Message: failed Wed 01/26/2011 05:23:20 PM : [standard-Group][13.ED.1A-->Group=1] Max Hops=3, Hops Left=2 Wed 01/26/2011 05:23:21 PM : [iNST-SRX ] 02 50 13.ED.1A 13.24.88 41 11 01 LTONRR (01) Wed 01/26/2011 05:23:21 PM : [standard-Cleanup][13.ED.1A-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Wed 01/26/2011 05:23:21 PM : [ 13 ED 1A 1] ST 255 Wed 01/26/2011 05:23:21 PM : [iNST-ACK ] 02 62 00.00.23 CF 11 00 06 LTONRR (00) Wed 01/26/2011 05:23:21 PM : [ F CF 73 1] ST 255 Wed 01/26/2011 05:23:21 PM : [ 17 F6 90 1] ST 255 Wed 01/26/2011 05:23:22 PM : [iNST-ACK ] 02 62 00.00.23 CF 11 00 06 LTONRR (00) Wed 01/26/2011 05:23:22 PM : [ Time] 17:23:23 3(0) Wed 01/26/2011 05:23:23 PM : [iNST-ACK ] 02 62 14.1B.2E 0F 46 00 06 IOOFF (00)

Heres the event viewer is there a way to get this to sort when saved i open it up and everything is just together and it takes forever to go thru and pick the day and hit enter to make everything go line by line. Wed 01/26/2011 03:54:47 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01) Wed 01/26/2011 03:54:47 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 03:54:47 PM : [ 14 1B 2E 1] DON 1 Wed 01/26/2011 03:54:48 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01) Wed 01/26/2011 03:54:48 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 03:54:48 PM : Duplicate: ignored Wed 01/26/2011 03:54:48 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01): Process Message: failed Wed 01/26/2011 03:54:48 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 03:54:48 PM : [iNST-SRX ] 02 50 14.1B.2E 13.24.88 41 11 01 LTONRR (01) Wed 01/26/2011 03:54:48 PM : [standard-Cleanup][14.1B.2E-->ISY/PLM Group=1] Max Hops=1, Hops Left=0 Wed 01/26/2011 03:54:48 PM : [iNST-SRX ] 02 50 14.1B.2E 13.24.88 42 11 01 LTONRR (01) Wed 01/26/2011 03:54:48 PM : [standard-Cleanup][14.1B.2E-->ISY/PLM Group=1] Max Hops=2, Hops Left=0 Wed 01/26/2011 03:54:48 PM : Duplicate: ignored Wed 01/26/2011 03:54:48 PM : [iNST-SRX ] 02 50 14.1B.2E 13.24.88 42 11 01 LTONRR (01): Process Message: failed Wed 01/26/2011 03:54:48 PM : [standard-Cleanup][14.1B.2E-->ISY/PLM Group=1] Max Hops=2, Hops Left=0 Wed 01/26/2011 04:04:47 PM : [ Time] 16:04:49 3(0) Wed 01/26/2011 04:06:03 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01) Wed 01/26/2011 04:06:03 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 04:06:03 PM : [ 14 1B 2E 1] DON 1 Wed 01/26/2011 04:06:03 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C3 11 01 LTONRR (01) Wed 01/26/2011 04:06:03 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=0 Wed 01/26/2011 04:06:03 PM : Duplicate: ignored Wed 01/26/2011 04:06:03 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C3 11 01 LTONRR (01): Process Message: failed Wed 01/26/2011 04:06:03 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=0 Wed 01/26/2011 04:06:03 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01) Wed 01/26/2011 04:06:03 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 04:06:03 PM : Duplicate: ignored Wed 01/26/2011 04:06:03 PM : [iNST-SRX ] 02 50 14.1B.2E 00.00.01 C7 11 01 LTONRR (01): Process Message: failed Wed 01/26/2011 04:06:03 PM : [standard-Group][14.1B.2E-->Group=1] Max Hops=3, Hops Left=1 Wed 01/26/2011 04:06:03 PM : [iNST-SRX ] 02 50 14.1B.2E 13.24.88 41 11 01 LTONRR (01) Wed 01/26/2011 04:06:03 PM : [standard-Cleanup][14.1B.2E-->ISY/PLM Group=1] Max Hops=1, Hops Left=0

Sorry i am not real good at explaing problems the blinds are not part of any scenes i just have them as a program. and the brultech isn't wirless the are wired to my router

thanks i am trying to understand this at a deeper level cause once a week i have 1 set out of three sets of blinds fail to open or close and can't find out why. the ms problem is with the brultech communication when the isy tries to read the brultech it takes several seconds for the response and any ms during that time does not go thru to the isy. i use to have it sent every 5 mins playing with it and have since changed it to 30 mins and the motions became more reliable.

so i shouldn't worry about those when i am tracing the event viewer?

but what are the digits after that they don't match any addresses i have.and the only rf devices i have are the ms and access points so i don't know if it affects anything else Jay

nope thats what wierd the notices started after the upgrade. i restored 1 of them last night and this morning when i walked by it gave me the message

Everything went great but now i am having problems of errors coming up saying cannot communicate with motion sensor. with the console open i can walk around the house go back to the computers and have a error for each ms on the screen that cannot communicate. Never had this before. Any Ideas? Thanks Jay

I have been trying to find out why once a week i have 1 failure on my scheduled runs. i have been watching the log everyday for my sunset & sunrise times. today i got a couple of x10 lines in there that i have never seen before and i don't have any x10. any ideas where it might have come from? also have some entries i don't know what they are it shows as Tue 01/25/2011 05:25:08 PM : (INST-ACK ) 02 62 00.00.17 CF 13 00 06 Does anybody know what this is cause i don't have any devices those #s I have been printing the logs and going thru them and have found that when the isy tries to contact the brultech ecm there is a pause up to 5 seconds before it gets it's response and if a motion sensor triggers in that time period the isy doesn't register the ms command. just for your info if your having ms problems intermitinly with a ecm.

Received an ACK for a different device that what i am getting with an outletlinc any ideas why just this 1 out of 8 do this? Is it a problem?

I was in and trying to set up remote access and set up my router then went into the isy and set the ip and ports and all that good stuff when it rebooted i can not access it. I have tried all the links in the forum and from the main page. all it does is bring up the admin console with a xlm parse error and don't ask for password or anything else. just sits there any ideas how to get back in to change everything? Thanks Jay

Michel went in and fixed my issuse within 15 mins you guys are awesome theres no better tech support out there. Thanks again

I have been at it since 8am have removed power the isy the plm and tried everything i can i only have 1 light on the isy. during boot up the other lights come on. have tried 4 differant computers. i have even tried the java app and it doesn't find the isy

Now i have lost everything. I have tried every differant way to access form the 1st page and all i get is admin console with no log in. everythings blank. I cleared the java. I have done the same as i have done for all the earlier updates. none of my sences work and lost all the motion

I bought an ir reapeater but it sent out odd cammands all the time when i watched the event viewer so i returned it and ran a cable then the problems started. move it back everythings fine. Thanks

I have 4 access points & several dual band switchlincs. with the home theatre stuff plugged in that circuit that also has an outletlinc in it works fine with the system in the next room but when i move the isy to the same circuit i lose connections to most of my devices. what doesn't make sense is the ouletlinc in that circuit has worked fine for a couple of yrs with houselinc and the isy. but when i move the isy to that circuit i lose everything. i have 48 devices in a 1500 sq ft home.