ingeborgdot

I have a question about after changing the programs on my 2 ms. If I change the program, do I need to do anything to the ms or just the switches to reset them to take the new program? Thanks.

Works.

Yep, I will delete the older and superfluous ones.

It is because I have too many scenes with them in it is the problem. It should be solved when I make one scene and put them all in it. I am still learning and you guys are great teachers. I just don't work with it enough to get real good at it.

Okay, I am out to lunch. I forgot about a couple of things that I should explain much better if I can. Example: East Counter lights are on a main switchlinc, a remote linc, a KPL downstairs and a KPL in the kitchen. How should I set all of these up? On one scene? My problem has been it won't let me choose as a controller. Example: West Counter Lights are on a main switchlinc, a remotelinc and a KPL. Sink light is on a main switchlinc, a remotelinc and a KPL.

Okay, let's see if I can explain correctly. In the kitchen I have switches on the south wall and at the other end of the room the KPL that has some of the buttons that control those switches. I need to be able to turn on and off from both places. When I turn on the lights from the switchlinc switch they turn on fine but the button on the KPL that corresponds with that light does not. If I turn on the light from the KPL the button lights up and the switchlinc on the other wall also lights up. Why does the KPL not light up when the switchlinc is turned on?

I do have an issue that I think I can solve but when I turn on the light that also is run by that KPL it does not light up the button any brighter than the original. When I turn it on at the KPL it lights up brighter. I can control it fine with my computer etc.

It keeps saying request failed.

I just got it a week ago.

I don't quite understand the wiki on how to control the LED brightness of the KPL. Thanks.

I have a KPL that I just installed and I am having a couple of issues that I just am not getting. The main light that it controls works fine with the KPL but I have a remote that also goes with this same button on the KPL. I know I need to make a scene to make it work but just can't seem to get it to happen. When I make the scene which should be the controller. The remote or the KPL? If I hold the remote button down it will turn on ( brighten) and turn off (dim). Thanks.

Thanks Rand.

Thanks Rand. How was your Thanksgiving? Did you get my other email?

So I can use the isy for some things and let the thermostat do the other things?

My biggest problem with that is my times don't work well with yours. I may be able to call this week. I will try. Thanks.

In my scene I have the two switches that control the two outside lights. I don't have the motion sensors. Do I need the motion sensors in the scene?>

What do you need to know more from me? What would you do differently to make all of this work? I just need some help, practice and whatever else it takes to get this right. The time was right.

Here is the other programs for the backyard light. I don't believe they work either. I know the manual backyard does not. I don't get it. This is the manual backyard enable If Control 'Back Porch Light' is switched Fast On Or Control 'Back Porch Light' is switched Fast Off And Control 'Back Porch Light' is not switched Off Then Disable Program 'BackYard Motion Control' Else Enable Program 'BackYard Motion Control' Set 'Back Porch Light' On Wait 1 second Set 'Back Porch Light' Off Enable Program 'BackYard Motion Control' Here is the motion control If Status 'Garage MS' is On Or Status 'House MS' is On Then Set Scene 'BackYard Lighting' On Else Set Scene 'BackYard Lighting' Off I am really struggling I guess. I am getting better but still struggling.

This is what I have now for the sunset/sunrise but it is not working for some reason. It comes on during the day. If From Sunset To Sunrise - 20 minutes (next day) And ( Control 'House MS' is switched On Or Control 'Garage MS' is switched On ) Then Set Scene 'BackYard Lighting' On Else - No Actions - (To add one, press 'Action') What am I doing wrong?

I want both switches to control both switches. My big question though is why they are coming on during the day now? My sunrise to sunset should work. I will look it over again.

My sensors have been kicking my lights on in the day now. I added another switch to the scene so the 2 sensors now control 2 switches which control 2 different lights. Should I set the switches to responders or controllers? Or should 1 controler and 1 responder? Anyone? Thanks.

Where do I go to learn how to post an image?

Thanks. That kind of messed with my mind.

Where do I find command? When I go to drop downs there is no command. I see control. Help me out here please.

Would this be a program by itself or added to the program above?