jerlands

Do you have a recent backup? Jon...

What Firmware and UI version are you using? Help > About Jon...

Have you tried removing devices from the scene before deleting? Jon...

The UUID should be in the format of XX:XX:XX:XX:XX:XX Jon...

Have you gone to "manage modules" through the UI? Help>Manage Modules Jon...

I'd like to see the word "Media" added to the list of devices. Jon...

There may not only be functional reasons but marketing reasons for pursuing the Amazon Certification. Jon...

If you know the IP address you can Telnet in and change to whatever (DHCP is recommended and then reserve the address on the router.) You can do this using a USB cable see the following link Appendix I CT command http://cache-m2.smarthome.com/manuals/isy99_userguide.pdf Jon...

You can always factory reset but you'll have to re-add all devices and you'll lose all programs and scenes. EDIT: unless you've made a backup. Jon...

If you assigned an IP address to ISY you may be able to add it into ISY Finder ( http://XXX.XXX.XXX.XXX.) That or check your router for that address and see if it's being used by something else. Jon...

If I recall you first link the two by placing in set mode and then you can do the beacon test. <--- edit: unless you've already linked them Jon...

No, there is no control of the range extender so ISY doesn't recognize it. Just follow directions for installation and you'll be good to go. Jon...

I changed the program to query but that failed to write.

I thought the same but apparently not. I experimented with a 2845-222 door sensor by changing the LED option to on, the update attempted and failed with the ! I then opened the door to trigger On but no update and failed with the small 1011. So I wrote a "write device updates" program then did the same but this time the update succeeded. I tried this twice with the program and both attempts went thru. Write Updates - [ID 00DB][Parent 00BE] If 'Door Sensors / Upstairs Bathroom / Upstairs BR - Door Sensor' is switched On Then Wait 2 seconds Set 'Door Sensors / Upstairs Bathroom / Upstairs BR - Door Sensor' Write Device Updates Else - No Actions - (To add one, press 'Action') Seemed to work ok.. Jon...

Along those lines.. maybe expanding the device notes to include fields that would supplement the "spoken" field? I'd like to see the spoken field used as a phrase similar to IFTTT method. Jon...

I don't know.. if all was working well the last year and suddenly not then something changed at that time.. you might look over your cable connection and swap if you have a spare. Jon...

Have you looked at your protocol settings in dashboard as in post #5? Jon...

It may help to change from static IP on ISY to DHCP and reserve the address on your router instead. Jon...

Here's a guide to port forwarding the Linksys E3000 Firewall for ISY.. You might check to ensure everything's properly configured. Jon..

Also you might check your protocol settings for http(s) in dashboard and set to TLS 1.2 and strength to ALL. Jon...

There are many skills Echo can utilize so there has to be a way of addressing which skill to use. for IFTTT "trigger" is used, for ISY "ask Issy," "open Issy" or "tell Issy" is used. Jon...

No.. Pushover notifications won't use yahoo mail but Issues like this are often security related, either on the receiving end or the transmitting end. Since similar outgoing communications are commonly affected you might look at the security you have installed on your gateway or any routers in the path. Jon...

What mail service are you using? Could be changes were made to their security that are interfering. Jon...

Who the L is Michael Bublé? Hey, anyone know why this thread is showing 0 views.. must reached that views limit or something Jon...

Yes, IFTTT creates a phrase and I'd like like to see the 'spoken field' (device>notes>spoken) also become a phrase rather than parsed words. That would allow me more than two words to describe the device and I'd be able to use the same heading more than just once only with a different ending.. problem is.. what did I name that device Jon...