BVincent

Is anyone else having issues with getting the ISY to send you email notifications? A year or so ago when there was an issue I setup a gmail accound and got everything working. Now it does not work again and either says Mail Server Failure (when using the 465 port with TLS turned off), or Mail Server Failure password not accepted (when using 587 port) Password is correct as I can log into gmail with it. I have tried changing the password as well.

I unplugged and plugged back in the device after all other items you suggested was not successful. The settings page is now up.

@Michel Kohanim I have Bond, Ecobee, Flair, and ST-NuHeat

Just got my new Polisy hooked up and working. Have 4 nodeservers up and running with no issue. My issue is when I try to go into Settings and Polisy configuration I get a screen that says "please wait, getting configuration" then sits there forever. How do I resolve this?

@MrBill Thank you for your responses. Are you running ISY on your Polisy? If so, does it support ZWave devices?

If I do not have the cable to probably came with my initial setup years ago, is there a way to go about making one? Or is it just easier to buy the USB version?

@MrBill Do you know if trying to move ISY over to the Polisy if the PLM from Insteon with the cat 5 between the PLM and the old ISY will work with the Polisy?

Is there any big benefit of the Polisy Pro over the standard version? What is the benefit for the Bluetooth and WiFi?

When using for a varriable I state "open" <spoke> and have it set for off is 0 and on is 100 but the variable does never changes. if I say "turn open" <spoken> "on" then it works. Any idea why?

@bmercier When using the command line as you show I am able to set my fan to 25% (low), 50% (medium), and 100% (high), however when you use the spoken works they set to: Low (127%), Medium (253%), and Hight (255%). As I noted above I am using a Smart by Bond fan controller which runs through Polyglot for control. I would need to put in Low (25%), Medium (50% or 75%), and High (100%) Is this possible?

@bmercierI am actually using a wifi fan controller called Bond. Is there a way to make an adjustment so Low is 25%, Medium is 50% or 75%, and High is 100%?

Not sure if you can help or not, however when I setup my fan through ISY and then Alexa as described above what I am finding is that when I tell the fan to turn off it works as supposed to however if I tell the fan to set to Low, Medium, or High, the fan goes to high. When I trouble shoot and look at the real time status below is what I get then reverts back to 100% Low = 127% Medium = 253% High = 255%

Not sure where that it is found, however I stopped and restarted the poly node with no change in the 4 nodes in poly. After your last message I went back into poly and it asked me to link my Nuheat with Poly again so I clicked on the link. I went back into ISY and all 3 Energy nodes are there but still only 2 energy nodes in poly. Either way, looks like it is working as designed. Thank you!

When I look at Polyglot it only shows 4 nodes: Controler, Themostat, and 2 Energy nodes.

I noticed that when you did the update ISY now only shows Energy - Day and Energy - Year, there was a 3rd before, maybe Energy - Month? Was that meant to go away?

Not sure if you have integrated your system with Apple Homekit or not. I don't believe this is an issue with your plugin but maybe you can assist. I am using homebridge-isy-maker and my goal is to pull the temperature from the thermostat to the variable Temperature Sensor hb.My_Thermometer.TemperatureSensor.CurrentTemperature which I can get to pull in ISY, but in the home kit app it is taking the variable in ISY (100 degrees) and thinking that is celius and converting it to ferienhight making it 212 degrees. Any thoughts on this or another way to pull either control of the thermostat or at least the current temp into Apple Homekit?

Definitely resolved my issue. Thank you VERY much for this fix and so quick. I have high and low temp alarms for all my rooms in my house.

Thank you very much!

The issue I am having is not setting the temp in the "Action" setting, but using the device in the "Condition" setting. for example: If (thermostat) > 100 degrees Then notify (email) to me Else (blank) My previous jerry rigged system aloud that. I like to have temp limit alarms just in case something fails.

EDIT: I got the thermostat today and installed it. For the most part pretty easy install. I set it up in Polyglot Cloud and can see it in my ISY control panel. I can change temps in ISY as well as the Nuheat app on my phone. Issue is when trying to create programs the thermostat part does not show up as a under if status but does show up under the action part. For an example if (thermostat temp) > (particular temp), then send alert email. There are 3 energy monitor features that show up for it but the thermostat temp setting part does not. Any ideas?

For flair and ecobee I had to get authentication keys from their wed sites or the company. As for local compared to web based I only like local because then I’m in 1 poly settings rather than switching between them. how will the new Polisy affect this if any? also thank you very much for the work you are doing on this!

I’m looking at getting one of these thermostats but don’t want to pull the trigger until I know it will work. 1. How is the progress with the build going? 2. You had said it was going to to be cloud poly only because of the API, ecobee and flair are both cloud based API but have a local poly build, will that be the goal!