BVincent

That error is what comes up when I am in the ST-Nuheat node server and press log

where does it go, says it is downloading the log package but no clue where it saves it.

I was able to get ecobee to work as well as Flair, Brond, and envisalink. All of those I can click on the log and it brings it up. This one does not. As for what got the others working, all of a sudden they started to work not sure why.

@simplextech It says it failed to get log file

@simplextech I purchased the V3 Node server but it will not start up. I didn't see anything on your github page that talks about it. v2 Node server starts right up but not v3. All my other v3 node servers start and work. Anything you can do to help?

This is what I get. No log, and won't start for the first time. Ecobee(2) Current Status: Disconnected Current Version: 3.1.2 [Production] Time Started: Not Running Uptime: None

Having issues with Ecobee with Polyglot V3 (and v2 for that matter). Can't get it to connect. I have unistalled and reinstalled in both v2 and v3 many times with no luck.

@gzahar After updating JAVA and Inteon for Polisy firm ware I removed and added them again and now they are working.

I just got 2 Ecolink Zwave Flood/Freeze sensors. The include via zwave with no issue. When I go to test them by creating a wet zone filling a tub up with water and the sensor getting submerged, the sensors do not change states. I have removed and added several times with the same issue. Anyone have these and able to make them work? Below are the different zwave zones that are added for each sensor: Notify Sensor - battery level Water Deteced - status on/off Freeze Alarm - status on/off Water Alarm - water alarm idle Lead Detected Alarm - status on/off Level Drop Alarm - status on/off Home Security Alarm - home security idle Tamper Alarm - status on/off

@Michel Kohanim Thank you again that was my initial thought.

@Michel Kohanim Thank you for the quick reply. Changing the ISY information didn't work earlier but it did this time. Is there a way to push the existing node servers or do I have to delete them and then reinstall them?

I have transitioned all of my Insteon devices over to ISY on Polisy. I am struggling on getting the node servers moved over to the new ISY setup. Couple questions: 1. I currently have the portal setup for my old ISY 2. How do I get the Polisy Polyglot to look at the new ISY on Polisy rather than the old ISY? 3. I did attempt to reset the Polisy to factory settings multiple times by holding the button in until all 3 lights flashed but it didn't reset anything. How can I go about resetting to factory settings if I decide to go that route?

I am going to start to do the transition from the old ISY to the Polisy. My plan is to do it little by little but will I be able to use Polisy as a node server for both the ISY and Polisy at the same time? I understand that for example I would not be able to run my Ecobee thermostats from both the ISY and the Polisy, however if I have that on the ISY on Polisy can I still use the the Polisy to run the node server for say my Bond lights.

2414U

So if I understand this thread correctly, the 2414U will NOT work with the Polisy?

@MrBill I am not able to do that because ISY only has a blue screen. I can't log into it nor get it to create and new admin user name and password. I believe I am missing a step with the update or something else prior to me trying to log into the ISY on the Polisy.

Where would I find that screen? If it is in the ISY system itself, the only option I have is File / Set user name and password. I think there is something I am missing before that since it is not auto finding it in the ISY finder either.

I have done my best to follow the directions to upgrade the ISY on the Polisy. The ISY launcher does not automatically find the ISY on the Polisy. I attempted to add it using the local web address of 192.168.200.212:8080/desc and it then shows up in the launcher. When I open that up all I can do is set initial user name and password. When I attempt to do that it asks if I want to make that the new user name and password. I say yes and then nothing happens. The change user name password box does not go away either. When I close it out and open it again same thing happens. I must be missing something. Prior to now I have not attempted to run ISY on the Polisy.

@ase Thank you, I do SSH all the time into my raspberry pi's so I am aware on how to do that. I finally was able to ssh into the Polisy. I was using my Polisy password and didn't know that was not the correct password to use.

I have searched and searched for an answer and can't seem to find it. Probably missing it somewhere. I would like to put ISY on my Polisy. I go into the portal and add the ip address as the instructions say, however when it takes me into the ISY screen I have to create a user name and password. I do that and it asks if I would like to save it which I do, but then nothing happens. I close out and then go back in and same thing. I see some information on the commands to use to do an update of the software for ISY but I am not sure how to get to the command prompt to do that. I am using a Mac Book Pro

@lilyoyo1 @oberkc Thank you for the help. I thought I figured out it was because the locks were part of my Digital Life system from AT&T but after I took the lock apart and moved to where my ISY was it removed and enrolled fine. I have the ISY in my basement, right about it on the 1st floor I have an AC plugged device that has a button for one outlet and always on for the other outlet, then I have another 1 of those on the other side of that room, and then a repeater 1 room over that can't get a signal. Even the 2 in the same room about 20 feet apart are not always working correctly.

I have the ISY in my basement, right about it on the 1st floor I have an AC plugged device that has a button for one outlet and always on for the other outlet, then I have another 1 of those on the other side of that room, and then a repeater 1 room over that can't get a signal. Even the 2 in the same room about 20 feet apart are not always working correctly.

I get a ZWave signal 2 rooms from the lock which is a plugable outlet, however again can't get the signal to go even 30 feet. I have removed, re insterted and factory reset many times and same issue occurs.

I am moving away from AT&T Digital Life which has 2 Yale ZWave locks integrated into the system. I have set back to defaults but cannot enroll with my ISY Zwave network. I have the 500 series chip and I have a difficult time getting my devices to pick it up 30 feet away in an open room. Any ideas on what can be causing this or what I can do to resolve it? Or are there other options for door locks to integrate with ISY?