Sub-Routine

If the lights are not all responding at the same time that does indicate communication errors. What if you increase the Wait? Running the Admin Console should not cause the ISY to perform differently. Rand

Hi David, Are these programs depending on the states of devices? There is a bug where occasionally a new program is not enabled automatically, but you say the program summary shows them as having run. The log file should provide more information and display any errors that occurred. Rand

Are you sure the outgoing mail server is mail... and not smtp...? If you check the log you should see an error when the mail fails. ISY-99i/ISY-26_INSTEON:Errors_And_Error_Messages#SMTP_Errors. Rand

Hi Billy, I added some info to our Wiki concerning using your own mail server. Or you can use our gmail test account. ISY-99i/ISY-26_INSTEON:SMTP_Configuration Rand

Hi Moshe, The Grace Period is the amount of time the ISY will put a program 'on hold' if it is busy processing another request. Save will store any changes made to the above parameters. Reboot will quit and restart the ISY. ISY-99i/ISY-26_INSTEON:System_Configuration Rand

Hi ketchup318, There is no way to set a motion sensor to off. I suggest you use Control rather than Status in your S1.Cond program. Rand

Hi ketchup318, When you select the non-dimming controller in the scene you can adjust the level and rate for the dimmer. Or use Copy Scene Attributes... Rand

Hi atmit, Turning On a scene will always turn on the KPL buttons in the scene. You will need to create a scene with only the three buttons and use a program to turn that scene Off when it sees the 4th button send an On. Rand

Hi Joe, I had this exact issue and answer was to remove the IOLinc from the ISY, execute a Factory Reset on the IOLinc, add it back to the ISY. 2450_Manual If that does not work you may have to ask SH for a replacement. Rand

Or one of these: Global-Cache-IP2IR-iTach-Wired-TCP-IP-to-IR Global-Cache-WF2IR-iTach-Wi-Fi-to-IR

Hi kingwr, I do apologize. We do not have any email from you. Did you receive an automated response to your submission? We did have three other email submissions on Sunday. The best way, if in doubt, is to use the phone line. We have a 24/7 answering service. 818 631 0333. Rand

The HTML page does not refresh automatically so a refresh brings it up to date. If the humidity value changed between when you opened the page and when you applied the refresh then the display will change. The same as going back to the Device page and then to the thermostat again. Rand

Hi Billy, The Refresh button simply updates the HTML display to correspond to the Admin Console. Doing so does not perform a Query and is your best option for viewing updated data. Rand

Hi Mitch, If you are using Outlook select Tools | Account Settings. Then select the account you want to use. To find the port settings use the More Settings... button and look at the Advanced tab. ISY-99i/ISY-26_INSTEON:SMTP_Configuration Rand

Hi Mitch, -11 SMTP_TO_TIMEOUT We have a Wiki page describing the errors: ISY-99i/ISY-26_INSTEON:Errors_And_Error_Messages#SMTP_Errors. Rand

Hi J, Your program is fine. Whenever ANY of the Conditions change the program is evaluated.You will see that it runs when you change the state of the KPL button as well as when the MotionSensor changes. If your folder had the Condition of the KPL button the program would only run when the folder was True. But it will work fine the way you have it. Rand

If the Program tabs are inaccessible this indicates a problem communicating with the PLM as Brian suggested. What version is your PLM? Tools | Diagnostics | PLM Info/Status Rand

Hi aLf, For the RemoteLinc please see the Wiki: ISY-99i/ISY-26_INSTEON:Link_Management_Menu#RemoteLinc_FAQs. Rand

Hi stef2, Besides an X10 address it could be that you accidentally linked the F to the Main button. Turning a button On or Off does not control linked devices. Probably the quickest fix would be to reset the KPL and use the ISY Restore function on the KPL. This should clear any X10 addresses as well as button links. KeypadLinc_Manuals Rand

Hi Richard, If you open the Event Viewer and send the Fast Off does it appear in the display? Rand

Practically there is no difference. The program will run when the status of the door changes. Then it will check the time constraint. You could put the program in a folder with the Schedule Condition on the folder which will disable the program outside of the hours you want. But it only takes a few clock cycles either way.

Hello ketchup318, Either way will produce the same result. The program will run when the garage door status changes. Rand

A factory reset of the ISY will reset it to DHCP. You have to hold the button for 10 seconds: ISY-99i/ISY-26_INSTEON:Restarting_Your_ISY-99i. Rand

Hi Paul, Modify the time to From rather than Time is. If From 7:00:00AM To 10:00:05PM (same day) Rand

Great news Terry! I, personally, have never had X10 work in our home but Insteon has been 99+% The Insteon scenes really push it over the hill. Rand