nowandthen

UD Mobile seems like it's not functioning like it used to. DIm/Bright options not available when clicking on a favorite. Is this an issue or just my old brain? LOL. Wasn't there an option to increase decrease brightness when clicking on a favorite icon?

I have several devices and scenes in UD mobile. I click on a device to turn it on or off. Maybe my old age is getting to me, but I was certain when I clicked on a device/scene, I could adjust the brightness, etc. Now I see nothing. Please help. Thanks.

It worked last night. Maybe this is a clue for the programmers to look at. Save from desktop not saving? Save fro UD Mobile app seemed to set thing straight, or a coincidence. Thanks to everyone for your help!

I set it to 100% just to be sure. Update on my original issue, the lights did not go off last night. Should have gone off at 2:30 AM but were still on at 3:30 AM. I double checked off time using UD App. It is set for 2:30 AM. I pressed "Save" in the upper right for the program and the lights went off. Hmmm... will see what happens tonight.

Techman: I deleted and recreated the program. That did the trick. To anyone, When creating the then condition, Action: Your devices, set [device/program,etc], when I select ON, there is an option below ON for 0% or 100%, my device is a v.38 OutletLinc, do I need to set it to 100%? It's currently still at 0% and program seems to work okay now.

bgrubb1: Confirmed, I did click update then save changes. Thanks. oberkc: EISY time is correct. Program is enabled. I have a nearly identical program that runs without issue. Thanks. DennisC, Program folder has no conditions. Thanks for tip on posting a program: Back Yard Malibu - [ID 0015][Parent 0014][Run At Startup] If From Sunset + 15 minutes To 2:30:00AM (next day) Then Set 'Landscape Lights / Back Yard Malibu' On Else Set 'Landscape Lights / Back Yard Malibu' Off

It's now past sunset and they did not turn on. This program is the same as one for porch light which works. Any clues? Beuller? Edit: Deleting and recreating the program fixed the problem. Thanks Techman! And thanks to everyone else that offered possible solutions. I appreciate your help!

Further testing, now the second condition of sunrise is also turning the lights on when the condition is outside the time frame.

Program (with bug?) Not meeting time condition: If From Sunset + 15 minutes To 3:30:00AM (next day) Then Set Landscape Lights ON Else Set Landscape Lights OFF Program that works: If From Sunset + 15 minutes To Sunrise - 2 hours (next day) Then Set Landscape Lights ON Else Set Landscape Lights OFF When I right click and select "Run If" (current time is 3:15ish PM) on the "bug program", it turns the lights on (they should not turn on because the IF condition is not met). When I right click and select "Run If" (current time is 3:15ish PM) on the "works" program, the lights do not turn on (the IF condition is met). I do not have 2 programs, I change the "To" to test the condition. Sunset to Sunrise works, Mix of Sunset to a time does not work correctly. What am I doing wrong when the To is a time instead of sunrise?

The IoX finder would only find my isy994i. Now that I have moved on to the eisy, the finder finds 2 items. When loaded, it reports as "not found". This is the first listing "https://eisy.local:8443/desc". I have to hit "OK" to the popup before I select the second listing which brings up the console. I can't delete the first listing. How do I correct or delete this behavior?

1. Make a how to, or if one exists, make the link to it a sticky at the top of the eisy forum. You need a better setup routine. The app on the phone is super slow, or the eisy is busy and it's not known to the user. Do something to improve the setup experience. You guys know the system too well. Try to put yourself in the shoes of a new user with little-to-no experience with your product. 2. Update your wiki so it shows eisy. It only shows isy994. I like the desktop app, but looking for eisy found nothing, so I took a chance and 3. Your firmware update page only lists the updates and what changed. There is no link to the latest firmware. I searched and couldn't find a link to the latest version. Why not provide a link in the post? I ended up downloading the isy994 console. I guess that will work.

My frustration is showing. The UDI team is so used to their programming, that they don't understand that someone completely new does not have their level of programming, and system functions. Please work on the setup interface so it is more user friendly. Thanks for listening to my gripes. I hope I am now on my way to re-setting up an eISY/Insteon system.

How do I disable the portal? Looking for desktop app.

There seems to be a delay with every step off the install. After typing the above, I hit a button on the app, don't recall exactly what it offered, but it retried and found the device. Perhaps a message that you may need to wait 1-2 minutes then retry each step. My internet is not slow. Next gripe: "Do you want to enable the 30 day ISY portal free trial?" I do not but the only option is to "Start Trial". ??? Now it's configuring remote access which I do not want. I do not want devices going out on the internet on their own. UGGGHHH! Dang!

Setting up a new eisy. Had isy994 at old house left it behind. Had UD mobile. I deleted and re-downloaded the app. Plugged eisy into my router via network cable. eisy shows up in my router. Set fixed IP, not that it matters. Router rebooted. I unplugged the eisy and plugged it back in. App wants to know what device I have. I selected eisy. App wants to know "How will your system connect to the internet?" I selected Wired. App says ( my wording) connect Ethernet cable, power on system, then scan the QR code on the bottom of the eisy. When I press Scan, it almost immediately returns to what system do you have. By the time I typed this, the QR scan held and I scanned the QR code. Now it's "Looking for Systems". It timed out, wants me to close the window and try again. UGGGHHH!!! Now it wants credentials, Local IP address I get. Local port, I do not. This system will never be main stream when it takes a computer Whizz to set it up. I understand some of this stuff but why is this so hard? Why do I have to come here for help getting this up and running? Please help!

Thanks. I'll just get what UD recommends (post 2 above). I don't care about the looks. It's hidden away. I just thought if the cable I referenced eliminated the the adapter, then I would go that route.

Instead of the serial to USB cable and the separate adapter, can I use something like this instead? https://www.amazon.com/OIKWAN-Compatible-Opengear-Aruba，Juniper-Switches/dp/B075V1RGQK/ref=sr_1_2?keywords=rj45%2Bto%2Busb%2Bcable&qid=1681486226&sr=8-2&th=1 TIA

That would be a RJ45 Serial to USB cable, right? Searching for Serial to USB cable returns a whole bunch of DB9 to USB cables. I just ordered the serial as I still have the ISY994i. But want to make sure I can use it on a newer eisy.

This applies to scenes. For a single device, the brightness displays correctly. I read another thread about excluding other devices to improve brightness calculation. I didn't quite understand what was being said. That thread mentioned a little calculator beside each device in the scene (I'm blind and dense at times). For others, click on your scene name (node). All nodes (to me, devices, device buttons) in the scene are listed. To the right of each node is a little calculator icon. Turn off the nodes that you don't want calculated in the brightness. In my scene, I have 1 light switch, and 3 KPL buttons. The light is at 59% but the percent shown on the button on my favorites screen showed 40%. To correctly show the brightness, I set the 3 KPL buttons to ignore, now only the switch is calculated and it reports correctly. What is the point of Estimated Status? Why would I want to see that? Also, why is it off by 1% at times, even when only one device is used to calculate? These things can drive me nuts. Sorry. Thanks. And thanks for this App. It's much more responsive than the app I was using.

I think it's time to put this Matter to rest.

I don't want a bunch of emails that have nothing to report. I hate companies that bombard me with emails. Those of us following this thread know (or should know) that Ken is trying to get the company going. I think we need to cut him some slack and be patient. Hopefully, when there is real news, we will get an email. Real news meaning, we have Switchlincs in stock, we have serial PLMs in stock, etc. And, hopefully, we licensed the PLM to UDI.

I see some Lutron items on their site. Haven't noticed that before (look in switches, and remote controls sections). But they redirect you to Amazon to purchase. I wish they would mark SOLD OUT on the front page instead of making us click through the items one by one. I'm not buying any more Insteon. I have a decent stock-pile of spares.

I'll give it a try. Thanks!

I thought noise too. I almost always use my modified extension cord with one end cut off when I add new devices or replace devices. I did that in these cases. I pigtail to the new device with wire nuts to the extension cord. This allows me to plug it in near my computer. This way I can get it all set up before I commit to it's final location. For the first KPL, I even tried plugging it in to the same receptacle as the PLM. Still had problems. But as I later discovered (and had I know it at the time I did the first KPL), sending a command to the device from within the Admin Console seems to "wake it up", exclamation points become green 1's. Then I write updates to device and all is well. Maybe it is noise issues but I have nothing better to try than the same receptacle as the PLM. I wish we had an Insteon noise detecting tool like we had with X10.

Thanks for all the feedback. I ended up manually setting up the new KPL. Dang I've had several devices die lately. They’ve been installed for years. I replaced a lamplinc, and a Swithclinc. Both gave me some problems in that they replaced, but showed exclamation points after restarting the ISY Admin console. I stumbled upon the "cure", at least for me. Every device I’ve replaced this weekend, have, once having replaced the old device, shown up in the ISY with exclamation points. I found if I click on the device and click On or Off at the bottom of the ISY window, it seems to wake the device up and it then shows the green 1’s instead of exclamation points. Then I select write updates to device and it then updates the device. I occasionally get a can’t communicate with device but it seems to continue updating. The second KPL I changed out did take all the updates from the ISY, but I had to kick start it as well. Thank goodness because that KPL was more complicated than the one above, that I manually updated.