nowandthen

What about resetting the KPL to factory default settings?

During Modem restore I got this pop up: Error [-110012] Couldn't open config file to read [/CONF/FF0401.REC] [-110022] Couldn't open file [/CONF/FF0401.REC] Still no luck. Only button C works. My Insteon devices are all new within the last two weeks. Three dual mode lamp modules, four SwitchLincs and one KPL. So far no problems other than this KPL. This KPL is controlling the same switchlinc switches so I wouldn't think there is a Insteon network problem. The KPL was working at one time but now only button C works. Edit: Also I can see the keypad button LEDs change (turn on or off) as I execute the "Then" portion of my programs, so I think that means Insteon communications are acceptable. Just seems to be the switch somehow got set to not send key press data over the network. /edit What about the "button grouping" window for the KPL? I don't know what that should look like. The matrix has a column for each button. None of the boxes are checked under any of the columns.[/img]

Lee, Thanks for the reply. The event viewer shows a lot of activity when the working button (scene C) is pressed but shows nothing for the other buttons. So I did as you suggested, selected the primary button and chose Restore Device. I saw a lot of activity in the event viewer as the device was restored, but unfortunately it didn't fix the problem. I tried twice and even closed the ISY admin console and restarted it, but the viewer still shows no activity for all buttons except button "Scene C". Any other suggestions? Todd

I am new to Insteon and the ISY 99. I was setting up scenes for my home theater and installed a KeyPadLinc 6 button dimmable switch 2486D. In ISY I set up two scenes and created two programs. Although they weren't working to perfection I could press the ON button and get a response (button 1 scene) and press the Scene C button and get a response (button C scene). But as many of you know the button LED states did not operate as expected. I messed around for a while with button grouping but have no idea if I did anything. ISY warns not to do anything from that menu but maybe I did something (?). Further reading lead me to the solution of creating a scene for each button and calling those scenes to turn the LEDs on or off. I only want the LED of the current active lighting scene to be on, all others I want off. That all works well thanks to this forum. But I must have done something wrong. Now the only button on the KeyPadLinc that will initiate a program is Scene C. The other buttons light up when locally pressed but ISY must not be seeing them turn on because nothing happens. So I thought I would try to get the other buttons working so I added scenes/programs for buttons A and B but they don't work either. I can run the THEN portion of the programs and the lights will respond and the LEDs will now do as I wish. I can also run the THEN command from MobiLinc and that works too. I may have done something in the button grouping area for the KeyPadLinc but I'm not really sure. The scenes are almost identical so it must be something within the KPL that is not sending out a button press for the other keys. Anyone have any idea what I need to do? Buttons are set to Non-toggle [ON]. Button 1 program: If Control 'House / Interior / Theater / Theater Main KPL.1' is switched On Then Set Scene 'Theater House Lights' On Set Scene 'Theater Main KPL button A' Off Set Scene 'Theater Main KPL button B' Off Set Scene 'Theater Main KPL button C' Off Set Scene 'Theater Main KPL button D' Off Set Scene 'Theater Main KPL button 1' On Send X10 'O1' Send X10 'O/Preset Dim (12)' Send X10 'O2' Send X10 'D/Preset Dim (12)' Else - No Actions - (To add one, press 'Action') Button C program: If Control 'House / Interior / Theater / Theater Main KPL.C' is switched On Then Set Scene 'Theater Intermission' On Set Scene 'Theater Main KPL button 1' Off Set Scene 'Theater Main KPL button A' Off Set Scene 'Theater Main KPL button B' Off Set Scene 'Theater Main KPL button D' Off Set Scene 'Theater Main KPL button C' On Send X10 'O1' Send X10 'O/Preset Dim (12)' Send X10 'O2' Send X10 'D/Preset Dim (12)' Else - No Actions - (To add one, press 'Action') Scenes "Theater House Lights" and "Theater Intermission" set the same set of 4 Insteon SwitchLincs to different levels.