polexian

Ok I want to be able to toggle an outlet on/off with a switch by pressing the on command. Everytime I push on I want it turn the outlet on or off respectivly. Any suggestions. I am trying this, but not working if switch is switched on and outlet is off then turn on outlet else turn off outlet I know that the first line is not right, but I don't know what to use to accomplish my goal.[/code]

I'm sure your still aware of the LED Brightness on the devices are still not working. 1 - 254 creates no LED. 0 is on.

Is it possible to be able to query the thermostat: If thermostat main is off and temperature is 4 degrees less than heat set point then turn on heat mode.

Last I heard, they are waiting for smarthome to return their message to try and fix the dimming issue with the insteon switches.

I am aware of the elk module, but with a virtual device it would help other people also, not just us elk users. Just a thought.

Michael, As of now, the only way to really get what you need out of the insteon devices with the elk is to buy a KPL. My question is, can you program in a KPL in the devices virtualy? Then we could set it with Mobilinc or by using a remote control for all of us with IR? This way we don't have to spend the money on a KPL!

My 2476D switch when using the LED brightness, if set to 0 it is on, any other number 1-254 it turns off also. Mon 11/29/2010 06:33:48 PM : [ IR] 034A Press Mon 11/29/2010 06:33:57 PM : [ IR] 0085 Press Mon 11/29/2010 06:34:02 PM : [16 10 5D 1 ] Memory : Write dbAddr=0x0264 [01] Mon 11/29/2010 06:34:02 PM : [iNST-ACK ] 02 62 16.10.5D 1F 2E 00 01 03 01 00 00 00 00 00 00 00 00 00 00 00 06 (00) Mon 11/29/2010 06:34:02 PM : [iNST-SRX ] 02 50 16.10.5D 13.21.FF 27 2E 00 (00) Mon 11/29/2010 06:34:02 PM : [standard-Direct Ack][16.10.5D-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 Mon 11/29/2010 06:34:03 PM : [ IR] 0151 Press Mon 11/29/2010 06:34:14 PM : [16 10 5D 1 ] Memory : Write dbAddr=0x0264 [00] Mon 11/29/2010 06:34:14 PM : [iNST-ACK ] 02 62 16.10.5D 1F 2E 00 01 03 00 00 00 00 00 00 00 00 00 00 00 00 06 (00) Mon 11/29/2010 06:34:15 PM : [iNST-SRX ] 02 50 16.10.5D 13.21.FF 27 2E 00 (00) Mon 11/29/2010 06:34:15 PM : [standard-Direct Ack][16.10.5D-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 I set it to 1 first, then to 0.

Need to clear out your java cache and restart your isy 99.

They are on the same breaker, and they are switchlink. it just started happening after the upgrade, so i might try downgrading then seeing if the problem is still there.

The lights are on a dimmer set to off, when turned on they go to 100% bright. The ceiling fan is on a on/off. Turn on and the fan turns on, turn off and the light flickers. The dimmer doesn't signal any turn on or anything. I will take them off the wall and check the wiring, but i'm 100% sure that wireing isn't a problem.

I have two insteon switches and I have an isy99. When i turn off my ceiling fan switch, the light flickers, the switch doesn't do anything though. Any ideas?

Under main tab where it lists all devices, why can we not re arrange the folders? IE: Folder: Office Folder: Bathroom Folder: Bedroom and if I wanted to move folder bedroom between bathroom and office, I could right click on bedroom and click move Up. Thoughts?

Installed great, haven't found any bugs yet, but will keep looking.