pjjameso

Okay, no idea why it worked on Polisy perfectly as one program, but to get it working on Eisy had to break into 3 programs. Issue solved so far... Airthings Timer - [ID 003E][Parent 0030][Run At Startup] If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then Repeat Every 1 hour Run Program 'Airthings AQ Test' (If) Else - No Actions - (To add one, press 'Action') Airthings AQ Test - [ID 003F][Parent 0030] If 'Airthings Controller / Main Level' CO₂ Level <= 775.0 PPM And 'Airthings Controller / Main Level' VOC <= 225.0 Then $sAirThings = 1 Else $sAirThings = 0 Airthings AQ Normal - [ID 006D][Parent 0030] If $sAirThings is 1 Then Set 'ERV' On Wait 15 minutes Set 'ERV' Off Else Set 'ERV' On

@Jimbo.Automates Would it be possible to add the PM 1.0 and 2.5 measurements to the nodeserver? 2025-02-14 12:25:25.689 Thread-32 (handler_poll) udi_interface WARNING Sensor:query: Unknown param pm1=2.0 2025-02-14 12:25:25.689 Thread-32 (handler_poll) udi_interface WARNING Sensor:query: Unknown param pm1=2.0 2025-02-14 12:25:25.689 Thread-32 (handler_poll) udi_interface WARNING Sensor:query: Unknown param pm25=2.0 2025-02-14 12:25:25.689 Thread-32 (handler_poll) udi_interface WARNING Sensor:query: Unknown param pm25=2.0

Thank you much! Timer - [ID 003E][Parent 0030] If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then Repeat Every 1 hour Run Program 'Airthings AQ Normal' (If) Else - No Actions - (To add one, press 'Action') Airthings AQ Normal - [ID 006D][Parent 0030] If 'Airthings Controller / Main Level' CO₂ Level <= 775.0 PPM And 'Airthings Controller / Main Level' VOC <= 225.0 Then Set 'ERV' On Wait 15 minutes Set 'ERV' Off Else Set 'ERV' On

So migrated to Eisy after bricking my Polisy with the upgrade. All seems to be working except for one program which I cant figure out why. The program shows green which means the If statement is true but the ERV doesnt turn off after the 15 min wait period. Any thoughts? Airthings AQ Normal - [ID 006D][Parent 0001] If 'Airthings Controller / Main Level' CO₂ Level <= 775.0 PPM And 'Airthings Controller / Main Level' VOC <= 225.0 Then Repeat Every 1 hour Set 'ERV' On Wait 15 minutes Set 'ERV' Off Else Set 'ERV' On

Quick question, does my zwave internal board mount internally in eisy or do I need the external enclosure?

Wired…. 300$ upgrade to eisy for me unfortunately.

Router shows online, and I can ping. Ioxfinder shows it but version is blank.

Well count me in as to a possibly bricked Polisy. Watched the upgrade on mobile app complete to 100%. Unable to reboot via 5 button presses so pulled the plug but not no beeps only far left light is on. Any thoughts on what to try at this point? Probably the quickest fix is to buy an Eisy!

The interesting point is the buttkicker has never changed to another device in the then statement. It’s just the device in the join action. Wonder how the set device is locked but the join is not, could it be due to the apostrophe? Maybe I should loan you a couple of Sonos units!

Thanks Bob for your thoughtful reply. One curious point is with the then statement Set 'ST-Sonos / Buttkicker' Join Basement Is that the buttkicker never changes in the program just the join Sonos device. Wonder why if it is reindexed as you suggest. Appreciated your help, understand that there doesn’t look like a solution.

Thanks Bob for the explanation. Of course I have a follow up question, is there a way to delete or disable all the other nodes in the ST-Sonos which would then force a default to the basement node. Or would it try and join to itself, assuming only two nodes?

I have a simple program that senses when to execute a join function as seen below. My problem is that it works fine but then after a while it loses the saved sonos unit in the program and changes to a random sonos unit. Is this a problem in the program function of IOX or is it a st-sonos issue? Any thoughts on how to correct the issue? Buttkicker - [ID 0032][Parent 0001] If 'Emporia / Bmt UPS' Killowatts >= 0.4000 kW Then Set 'ST-Sonos / Buttkicker' Join Basement Else Set 'ST-Sonos / Buttkicker' Leave

Thanks for the effort, appreciate previous updates......

@Jimbo.Automates Thank you for the update. Of course I can’t figure out how to turn off polling, could you point me in the right direction?

@Michael Ticket created.

@Jimbo.Automates Thank you Jimbo. Question when I try and upgrade it says I dont have a valid license. Is this a bug or do I need to purchase again?

File too big to attach, send email address?

Will do, will revert tomorrow with file.

I was more trying to not overload the short polling process by deleting the node. Solution at this point is to increase the polling time.

I have deleted a node in pg3x but it keeps getting recreated. Is there a method to keep it from recreating itself?

Bump @Jimbo.Automates Any chance for VOC values?

Hi Jimbo, Was wondering if you could add missing fields to the plugin. Looking specifically for VOC values, the VOCLVL just indicates whether it is Clean not the actual value. I have attached screenshots to show what IOX provides vs the Node listings.

Asking for help from the programming gurus.... would like to create a program that turns on the ERV for 20 min every hour. Would appreciate if someone could point me in the right direction as to setup.

Attached the log, assume this is the error folks are referencing? @Jimbo.Automates Is there anything I can do to get up and running before the next PGx update? ELK_2-11-2024_30649_PM.zip