pjjameso

Dont suppose the node definition is too long? Wonder if anyone else has come across this using ambient weather. Thanks again for taking a look at the issue.

Looks like file is too big when zipped for the forum

192.168.4.6_8443_rest_nodes.zip192.168.4.6_8443_rest_nodes.zipReinstalled nodes server, no change. Attached rest/nodes in case you see something I missed.

Yes,

As far as I can tell the ambient weather nodes do not show up with the above https

Unfortunately, same result when typed in manually.

Polisy 5.6.3, PGx 3.1.36, Notification 3.6.9

No go on the previous suggestion. Slot 2 is the AmbientWeather nodeserver. Guess I will have to wait for @Jimbo.Automates or @bpwwer for some thoughts.

Doesn’t work in the body either

Trying to use a variable in the subject line without much success. This is what I entered but just returns the text vs the value. Thanks in advance.

Has anyone been able to add amazon eero routers to Polisy? If so, how?

What is the range of Zigbee devices and Polisy? Polisy is in basement and zigbee shade is on the 2nd floor. Too far? Polisy doesn’t seem to find the device.

Shades, such as the one here. https://www.amazon.com/gp/product/B0BTPQ2VBB/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Error fixed, needed to add a wait statement before sending notification.

Is it possible to add the 'Outdoor Air' information to the node server? Home in the screenshot below from the dashboard.airthings.com site. https://developer.airthings.com/docs/api-getting-started-consumer/

Jimbo, Have a customization setup to report the status of a device. UD Mobile indicates the status correctly but the notification message. shows the complete opposite, eg 100% is actually off and vice a versa. Not sure what I have done wrong at this point.

What am I to do with this message? Everything appear to be working

BTW your Notification Node Server is awesome! So much easier to use.

Jimbo, Does notification send device status information? Would like to know if device is on or off in my scenario. Realize I can do it through variable and program, but thought i would check in first.

Jimbo, Is it possible to use notification customizations to send the value of the ambient weather node server driver or do I have to somehow create a variable and then send in a message. Writing a program to read the value of the humidity on our main level and if it greater that equal to 55% turn off the Energy Recovery Ventilator. Message would tell me its been turned off and then what the current humidity is.

Very interesting, think im good as is…. Rebooted polisy again and messages showed up with zone number.

Okay, Im back again... So I have one zone that is showing a low battery value of true. I ran the If statement and am still getting a # symbol (subject and body) for the zone number. Is something else going awry?

Looks like we are all set! One further question, does your new notification schema mean that we dont need to bother with network resources/pushover any longer? Would best practice be to convert everything over to UD Mobile?