pjjameso

Is it possible to add the 'Outdoor Air' information to the node server? Home in the screenshot below from the dashboard.airthings.com site. https://developer.airthings.com/docs/api-getting-started-consumer/

Jimbo, Have a customization setup to report the status of a device. UD Mobile indicates the status correctly but the notification message. shows the complete opposite, eg 100% is actually off and vice a versa. Not sure what I have done wrong at this point.

What am I to do with this message? Everything appear to be working

BTW your Notification Node Server is awesome! So much easier to use.

Jimbo, Does notification send device status information? Would like to know if device is on or off in my scenario. Realize I can do it through variable and program, but thought i would check in first.

Jimbo, Is it possible to use notification customizations to send the value of the ambient weather node server driver or do I have to somehow create a variable and then send in a message. Writing a program to read the value of the humidity on our main level and if it greater that equal to 55% turn off the Energy Recovery Ventilator. Message would tell me its been turned off and then what the current humidity is.

Very interesting, think im good as is…. Rebooted polisy again and messages showed up with zone number.

Okay, Im back again... So I have one zone that is showing a low battery value of true. I ran the If statement and am still getting a # symbol (subject and body) for the zone number. Is something else going awry?

Looks like we are all set! One further question, does your new notification schema mean that we dont need to bother with network resources/pushover any longer? Would best practice be to convert everything over to UD Mobile?

Rebooted Polisy agian, making progress as body text shows up as follows: Transmitter Low Battery: node[#]

Sent a PM

Done, so strange, did steps and restarted PG3x and still no body information. Also strange not a single log entry.

Yes, to the UD Mobile node...

Im getting the subject line correctly but none of the body data is coming through, thoughts?

I am getting the message subject line only, not the details of the zone or fault from the notifications. Thoughts?

Thank Jimbo! I have 17 wireless devices so would appear I would need to include all in the or statement. I guess there is no way just to pull the message from the keypad or log directly.

Would like to setup a notification whenever there is a message on my keypad which is the Navigator model. The default screen shows Transmitter Low Battery, the log shows the specific zone and message. Any method to pull this information and setup a notification? Tried to attach screenshots but uploads seem slow today. Would this require new fields on the keypad node by Jimbo?

Ah, i thought PG3 was at 3.1.27. Guess not, thanks!

Pressed the update packages button, popup window asked for confirmation, said yes but AC says active. Is this normal? Previously window would disappear while upgrade was performed. I manually closed AC but Polisy never seems to upgrade. Im on 5.60 IOX and 3.1.21. I have pulled the power and rebooted but same result with upgrade packages. Interesting note the reboot button in the AC does in fact reboot the Polisy. Any thoughts?

Two posts solved my programming, thank you. Everything was completed in Elk RP, voice and beep. Used rules to trigger a task for voice while the rules handled the beep on and off. Used output state set by Polisy to silence voice and beep incorporated into the rule, eg if output ‘on’ don’t speak or beep for 30 Seconds. Thanks again for pointing me in the right direction.

Okay, Failed miserably. I dont understand using network resources how to trigger the beep and the voice when the zone is violated. Any hint on the driver format to use?

Thank you!! Will start working on the solution now. Im on Polisy using the Elk node server.

Currently I have a wine cabinet door which is setup as a non alarm zone. I have written two rules in ELK such that when the zone is violated the keypads start beeping and another to turn off the beeping when the zone is secure. I would like to be able to use the UDI App to disable the beeping (in case folks have gone to bed) when I open the wine cabinet and auto enable after a short period of time. What would really be awesome is if I could get ELK to announce, 'wine cabinet violation' and beep at the same time..... Any thoughts as how to proceed?

I bought 3 of these for my sons chain pull blinds and the motors work great. The Wi-Fi/Alexa hub integration is flawless. Currently using smartenit Insteon relays with somfy curtain motors which are no longer produced.

Is it possible to have a Insteon keypad execute an Alexa command? Asking as curtain controller will respond to Alexa commands but would also like to be able to control each shade discretely via buttons. Currently have separate Insteon devices for each curtain mated to a curtain motor but if they fail there isn’t a direct replacement. The new curtain motor I would like to use is https://www.helloryse.com/ but they dont have an public api.