diggler

All fixed, thank you for your help. Sent from my SM-G960U using Tapatalk

Makes sense. I appreciate the help. Gonna change it now and check. Sent from my SM-G960U using Tapatalk

Took.the wires out and re set them. Now the light on iolinc is lit when open and off when closed. When press D garage opens and d is lit. When i press to close d light is off and garage stays open. Press d again light is lit and garage closes. Once closed d light is turns off. Sent from my SM-G960U using Tapatalk

Whats weird is it works right with 1 click in the consol when i click on the relay. Sent from my SM-G960U using Tapatalk

I did not change any keypad settings. I will take a look at the light in the morning and check the connections. I have 2 sets of wires. 2 go to gnd and s the other 2 go to n/o and com Sent from my SM-G960U using Tapatalk

Under sensor scene, for the sensor i clicked advance properties and 1 retry is selected. Is that normal Sent from my SM-G960U using Tapatalk

When door is open, current status is on in red When door is closed, current status is on in red In the pic garage is closed. I am gonna switch reverse trigger back to uncheck Edit, just checked and reverse trigger is not checked. Sent from my SM-G960U using Tapatalk

Prior I had it set to latching. Followed the wiki page and made those 2 changes. Sent from my SM-G960U using Tapatalk

Previously i would push "d" when light is off and garage would open. Then "D" is lit. If i used garage door opener to open "D" would light up. When i would close garage "d" would turn off. I made 2 changes to isy. Checked reverse trigger and set momentary A Sent from my SM-G960U using Tapatalk

When i access isy from my phone garage works with 1 click. This is a detached garage and i dont get wifi to the garage. Pic of iolinc is when garage is open. Sent from my SM-G960U using Tapatalk

I set the wire the same way they were to the new iolonc Sent from my SM-G960U using Tapatalk

Got the new iolinc in. Added it to the scenes. Now i have to push the "D" button twice to get it closed and the light stays lit. Sent from my SM-G960U using Tapatalk

Finally have some free time. Logged in to isy consol and this is what the status is of the iolinc for the garage. The sensor is plugged in and function when i oress the button on the iolinc. Could this mean a bad iolinc. I threw every breaker and still doesnt work. Sent from my SM-G960U using Tapatalk

I am having the same issue. Its linked to my keypad which shows open and close by the d button being lit when open. I have not had a chance to play with it but some people said it can be noise. Sent from my SM-G960U using Tapatalk

Only thing i think i did was install the switchlinc in the garage. Sent from my SM-G960U using Tapatalk

I have had my garage hooked up for a number of years no issues till now. All of the sudden garage will rarely open when i press the keypad button. If i push the button on the iolinc she opens. I have a light wired to a switchlinc in the garage that works. Even in the isy dashboard it wont open. How do I trouble shoot this? Sent from my SM-G960U using Tapatalk

I removed both devices from every scene. Problem solved. Thanks for the help. Sent from my SM-G960U using Tapatalk

Thank you Sent from my SM-G960U using Tapatalk

I have always wondered about running a cell phone charger or a small plug adapter and hard wired to the device. Did this a couple of times with a baby swing and some outdoor animatronics. Just had to find the right voltage and amps. Anyone ever try it? Sent from my SM-G960U using Tapatalk

I have 1 light in my backroom that randomly turns on everyday at 9pm. Have another light in my basement that randomly turns off at 9pm. Odd cause if i check that device to see when its scheduled to run next, no where does it say those times. Is there a way to see what is triggering these events? Sent from my SM-G960U using Tapatalk

I do have a simple setup, i dont play enough around with isy. For right now just made certain lights flash on and off. Sent from my SM-G935P using Tapatalk

I have version 4.6.2. Will the siren work with this version? Very little info on google search. Sent from my SM-G935P using Tapatalk

Ill try that thanx Sent from my SM-G935P using Tapatalk

I figured out what the one is. Now I just have to find out why when the leak sensor variable turns 9 I don't get an email or a text message. Sent from my SM-G935P using Tapatalk

I get notifications threw email only everyday at 8:59 am. Says subject: problem in the body of message it says "1" Sent from my SM-G935P using Tapatalk