MrWorf

First version available here: https://github.com/mrworf/serial-bridge You'll need a USB Insteon PLM (I'm using the usb stick) and a RS232 converter connected either via USB or via the UART on the RPi. The cable to talk to the ISY looks like this: RJ45 PIN1 --> RS232 TX RJ45 PIN8 --> RS232 RX RJ45 PIN7 --> GND No other connection needed, this will allow your RS232 connection to communicate with the ISY994. I used https://www.amazon.com/gp/product/B07WKKVZRF to split out the ethernet cable to individual cables (handy when testing). The bridge.py is completely automated (once python3-serial is installed, see README.md), it has the following logic: If 3 serial ports are detected, the two external ones will be bridge (RPi always has ONE serial port) If 2 serial ports are detected, these will be bridged (happens only when you use the UART on the RPi itself) Less than 2 or more than 3 will result in error code Big thanks to @Michel Kohanim for providing the exact pinouts of the ISY to simplify the work on getting it properly wired. If you find issues and are able to do bugfixes, please submit PRs for this project. If you're not able to fix, feel free to submit an issue on the project. No promises that I will fix it, especially if it's not related to the USB stick from Insteon (since I don't want to get the powerline USB one). As for performance of this setup? I see no difference in reaction times using wireless only. In fact, since switching to this, the comms between the ISY and my insteon network has never been more reliable I'm also hopeful that by being offgrid (from a PLM standpoint) it will stay solid much longer since the main culprit (from my understanding) with the wired ones is all the extra components that connect to 110. Will update later next week when I get my RS232 to TTL adapter so I don't need a USB hub for my RPi0W.

Not sure how that would work since normally USB power flows the other direction and providing 5V as a device on the Vcc isn't exactly considered OK and can cause issues. Also, given that the PLMs tend to burn out, I'd be hesitant to rely on it to power your Pi since fluctuating power can easily corrupt an SD card (seen that, done that )

I'm pretty sure it would work the same way.

Good news, I finally got it all put together as well as a hack to bridge the two serialports logically inside the Raspberry Pi and waddayaknow, it works. It actually works 100% so far, meaning that the ISY994 didn't realize that it's talking to the 2448A7 via a linux bridge and performance is no different than before. Reliability on my network also went way up, I (knock on wood) haven't had any failed operations, whilst my old PLM couldn't do much anything anymore. Obviously right now it's a horrible hack, but expect an update in a few days with pictures and github link. Right now I'm waiting for a better RS232-to-TTL which should arrive next week. End goal is to make a SD card image for the RPi Zero where you use the onboard UART to talk to ISY994 and the USB port to connect to the 2448A7 usb plug. Stay tuned .. but for now, some pictures to prove it exists

I have a number of devices on my Insteon network which are highlighted needing writes. But whenever I do, they never succeed. Instead I see `Open failed for [/CONF/NODES/UNOxxx.BIN] (w)` in my log where xxx is a number. I also see same error for /CONF/4B5633.REC and more. It feels like my ISY's SD card might be corrupted. Anyone seen this and have suggestions on what to do?

Just found out today that insteon seems to have given up on the serial PLM and availability is very scarce (not to mention non-existent). But I also found that they had a RF only PLM called 2448A7. Now, if I understand things correctly, the ISY994 PLM port is nothing more than a serial port, and while the 2448A7 is USB, it actually just exposes a serial port as well (but over USB). My plan was to do a quick "hack" where I take a RaspberryPi, connect a 2448A7 and a USB to serial port adapter and then build a cable to go between my Raspberry and the ISY994. The thinking being that I could cobble together a gateway on the Pi which would open the port to the insteon usb device and basically forward all comms to the other USB adapter and thus connect the ISY994 to the USB Insteon. Does it sound sane? I think it does, but I'm wondering if anyone has the pin-out for the ISY994i port and also what signal level it uses (5V, 3.3V, etc..) so I don't burn something. If it's 3.3 I should in theory be able to use the serial port built-in to the Pi, but that seems a bit optimistic So what's the question? I need the lay of the land of the PLM port on the ISY994 so I can custombuild that cable and avoid frying it if it's expecting 3.3V

Things are acting super suspicious. I've moved the PLM to different parts of the house, I've tried restore on various devices and essentially all fails. To top it off, there's no PLM available from the Smarthome store so I can't try replacing the PLM itself if that's the cause. Any suggestions on how to debug this is most appreciated.

Zomg, even when I do restore on a device which is on the same circuit as the PLM it fails to do it. What's going on here?

Also, I use home assistant to trigger scenes on the ISY so at no point do I use a Control or similar (been burned there before )

Hmmm... I think something else is going on. Today I'm able to fetch the device links from various devices, but when I restore a device, it drops off from communication and it fails the restore halfway through. Doing a query afterwards will get it back in communication again, but restore will always fail.

I have a scene for my garage which is triggered via the REST API. This scene contains 3 devices, two keypads and a micro switch which is tied to the actual light. Both keypads act as a controller for the microswitch. From time to time (about every 2-3 weeks) when this scene is triggered, instead of just turning on the garage light, all but like 5 insteon devices turns on. If it's a dimmer that was on but at like 10%, it will go to 100%. Looking at the log from the ISY994, there's nothing really, other me frantically turning off all lights again ISY Log: Hallway.Keypad.Lights* Status 100% Sat 2021/05/01 12:45:15 AM System Log BedroomH.Keypad.Hallway* Status 100% Sat 2021/05/01 12:45:15 AM System Log Hallway.Keypad.Lights* Status Off Sat 2021/05/01 12:45:17 AM System Log BedroomH.Keypad.Hallway* Status Off Sat 2021/05/01 12:45:17 AM System Log BedroomJ.Keypad.Lights* Error 0.00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 Sat 2021/05/01 12:45:25 AM System Log Kitchen.Keypad.Island* / Kitchen.Keypad.Patio Status On Sat 2021/05/01 12:45:33 AM System Log Bedroom.Switch.Patio* Status 100% Sat 2021/05/01 12:45:33 AM System Log DiningArea.Dimmer.Patio Status 100% Sat 2021/05/01 12:45:33 AM System Log BedroomH.Keypad.Hallway* / BedroomH.Keypad.Patio Status On Sat 2021/05/01 12:45:33 AM System Log BedroomJ.Keypad.Lights* / BedroomJ.Keypad.Deck Status On Sat 2021/05/01 12:45:33 AM System Log Kitchen.Keypad.Island* / Kitchen.Keypad.Patio Status Off Sat 2021/05/01 12:45:35 AM System Log Bedroom.Switch.Patio* Status Off Sat 2021/05/01 12:45:35 AM System Log DiningArea.Dimmer.Patio Status Off Sat 2021/05/01 12:45:35 AM System Log BedroomH.Keypad.Hallway* / BedroomH.Keypad.Patio Status Off Sat 2021/05/01 12:45:35 AM System Log BedroomJ.Keypad.Lights* / BedroomJ.Keypad.Deck Status Off Sat 2021/05/01 12:45:35 AM System Log Entryway.Keypad.Lights* / Entryway.Keypad.Front Status On Sat 2021/05/01 12:48:33 AM System Log Garage.Front.Light* Status On Sat 2021/05/01 12:48:33 AM System Log Garage.Keypad.Garage / Garage.Keypad.FrontLights Status On Sat 2021/05/01 12:48:33 AM System Log Entryway.Keypad.Lights* / Entryway.Keypad.Front Status Off Sat 2021/05/01 12:48:34 AM System Log Garage.Front.Light* Status Off Sat 2021/05/01 12:48:34 AM System Log Garage.Keypad.Garage / Garage.Keypad.FrontLights Status Off Sat 2021/05/01 12:48:34 AM System Log Get NodeDef ZWave 0 Sat 2021/05/01 12:51:38 AM System Log The actual microswitch isn't listed here even (Garage.Lights*) The error log for the same period: Sat 2021/05/01 01:01:32 AM System -10 [UNKNOWN ] 02 FA This time I decided to open the admin console and see if I could get more details. First thing I notice is that the ISY has no clue that this happened, because the dimmers that went from 10% to 100% still show as 10% in the console, the light I haven't turned off yet still show as off. Second thing I did is try loading the Debug->Show Device Links Table for one of the keypads related to the garage. This results in a blank list. Doing this over for a number of my devices in the network all results in the same, I don't get a list of links. Looking at the event viewer however, I see this: Sat 05/01/2021 01:17:02 AM : [INST-TX-I2CS] 02 62 40 FA DA 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 C2 Sat 05/01/2021 01:17:02 AM : [INST-ACK ] 02 62 40.FA.DA 1F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 C2 FA 06 (00) Sat 05/01/2021 01:17:02 AM : [INST-ACK ] 02 62 40.FA.DA 1F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 C2 FA 06 (00): Duplicate or ACK for a different device Sat 05/01/2021 01:17:02 AM : [INST-SRX ] 02 50 40.FA.DA 40.52.B4 2B 00 00 (00) Sat 05/01/2021 01:17:02 AM : [Std-Direct Ack] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:11 AM : [INST-TX-I2CS] 02 62 40 FA DA 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 C2 Sat 05/01/2021 01:17:11 AM : [INST-ACK ] 02 62 40.FA.DA 1F 2F 00 00 00 0F FF 00 00 00 00 00 00 00 00 C2 FA 06 (00) Sat 05/01/2021 01:17:11 AM : [INST-ACK ] 02 62 40.FA.DA 1F 2F 00 00 00 0F FF 00 00 00 00 00 00 00 00 C2 FA 06 (00): Duplicate or ACK for a different device Sat 05/01/2021 01:17:12 AM : [INST-SRX ] 02 50 40.FA.DA 40.52.B4 2B 2F 00 (00) Sat 05/01/2021 01:17:12 AM : [Std-Direct Ack] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:12 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 11 2F 00 00 01 0F FF 20 A2 18 40 52 B4 FF 1F 02 82 Sat 05/01/2021 01:17:12 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:17:14 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 13 2F 00 00 01 0F FF 20 A2 18 40 52 B4 FF 1F 02 82 Sat 05/01/2021 01:17:14 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Sat 05/01/2021 01:17:14 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 11 2F 00 00 01 0F F7 20 A2 17 40 52 B4 FF 1F 02 8B Sat 05/01/2021 01:17:14 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:17:14 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 16 2F 00 00 01 0F F7 20 A2 17 40 52 B4 FF 1F 02 8B Sat 05/01/2021 01:17:14 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Sat 05/01/2021 01:17:15 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 16 2F 00 00 01 0F EF 20 A2 04 49 92 30 FF 1F 04 DF Sat 05/01/2021 01:17:15 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Sat 05/01/2021 01:17:16 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 11 2F 00 00 01 0F E7 20 A2 01 42 04 C4 FF 1F 02 ED Sat 05/01/2021 01:17:16 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:17:17 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 12 2F 00 00 01 0F DF 20 E2 04 49 92 30 01 00 04 CC Sat 05/01/2021 01:17:17 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Sat 05/01/2021 01:17:17 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 12 2F 00 00 01 0F D7 20 22 01 54 5C 7D FF 1F 01 5B Sat 05/01/2021 01:17:17 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Sat 05/01/2021 01:17:18 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 12 2F 00 00 01 0F CF 20 22 07 49 92 30 FF 1F 04 7C Sat 05/01/2021 01:17:18 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Sat 05/01/2021 01:17:19 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 11 2F 00 00 01 0F C7 20 A2 05 2B FE 64 FF 1F 01 87 Sat 05/01/2021 01:17:19 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:17:19 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 17 2F 00 00 01 0F C7 20 A2 05 2B FE 64 FF 1F 01 87 Sat 05/01/2021 01:17:19 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Sat 05/01/2021 01:17:22 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 13 2F 00 00 01 0F BF 20 A2 00 40 52 B4 FF 1F 01 DB Sat 05/01/2021 01:17:22 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Sat 05/01/2021 01:17:24 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 1B 2F 00 00 01 0F B7 20 A2 1F 40 52 B4 FF 1F 01 C4 Sat 05/01/2021 01:17:24 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:25 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 16 2F 00 00 01 0F AF 20 A2 2A 40 52 B4 FF 1F 01 C1 Sat 05/01/2021 01:17:25 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Sat 05/01/2021 01:17:25 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 11 2F 00 00 01 0F A7 20 A2 2D 40 52 B4 FF 1F 01 C6 Sat 05/01/2021 01:17:25 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:17:26 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 12 2F 00 00 01 0F 9F 20 E2 01 2B FE 64 01 00 01 90 Sat 05/01/2021 01:17:26 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Sat 05/01/2021 01:17:27 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 12 2F 00 00 01 0F 97 20 EA 01 2C 85 AF 01 00 01 BD Sat 05/01/2021 01:17:27 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Sat 05/01/2021 01:17:27 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 11 2F 00 00 01 0F 8F 20 EA 01 40 52 B4 01 00 01 DF Sat 05/01/2021 01:17:27 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:17:28 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 16 2F 00 00 01 0F 87 20 22 08 49 92 30 FF 1F 04 C3 Sat 05/01/2021 01:17:28 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Sat 05/01/2021 01:17:29 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 1B 2F 00 00 01 0F 87 20 22 08 49 92 30 FF 1F 04 C3 Sat 05/01/2021 01:17:29 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:30 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 16 2F 00 00 01 0F 7F 20 EA 02 40 52 B4 01 00 02 ED Sat 05/01/2021 01:17:30 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Sat 05/01/2021 01:17:31 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 17 2F 00 00 01 0F 77 20 EA 02 42 04 C4 01 00 02 31 Sat 05/01/2021 01:17:31 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Sat 05/01/2021 01:17:32 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 16 2F 00 00 01 0F 6F 20 EA 03 40 52 B4 01 00 03 FB Sat 05/01/2021 01:17:32 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Sat 05/01/2021 01:17:32 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 11 2F 00 00 01 0F 67 20 EA 04 40 52 B4 01 00 04 01 Sat 05/01/2021 01:17:32 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:17:33 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 1B 2F 00 00 01 0F 67 20 EA 04 40 52 B4 01 00 04 01 Sat 05/01/2021 01:17:33 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:34 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 11 2F 00 00 01 0F 5F 20 EA 05 40 52 B4 01 00 05 07 Sat 05/01/2021 01:17:34 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:17:34 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 1B 2F 00 00 01 0F 5F 20 EA 05 40 52 B4 01 00 05 07 Sat 05/01/2021 01:17:34 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:36 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 16 2F 00 00 01 0F 57 20 EA 06 40 52 B4 01 00 06 0D Sat 05/01/2021 01:17:36 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Sat 05/01/2021 01:17:37 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 12 2F 00 00 01 0F 4F 20 EA 07 40 52 B4 01 00 07 13 Sat 05/01/2021 01:17:37 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Sat 05/01/2021 01:17:38 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 1B 2F 00 00 01 0F 47 20 EA 08 40 52 B4 01 00 08 19 Sat 05/01/2021 01:17:38 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:39 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 12 2F 00 00 01 0F 3F 20 A2 21 40 52 B4 FF 1F 03 38 Sat 05/01/2021 01:17:39 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Sat 05/01/2021 01:17:40 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 17 2F 00 00 01 0F 3F 20 A2 21 40 52 B4 FF 1F 03 38 Sat 05/01/2021 01:17:40 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Sat 05/01/2021 01:17:41 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 11 2F 00 00 01 0F 37 20 E2 03 20 34 99 01 00 03 94 Sat 05/01/2021 01:17:41 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:17:41 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 1B 2F 00 00 01 0F 37 20 E2 03 20 34 99 01 00 03 94 Sat 05/01/2021 01:17:41 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:42 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 16 2F 00 00 01 0F 2F 20 A2 22 40 52 B4 FF 1F 04 46 Sat 05/01/2021 01:17:42 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Sat 05/01/2021 01:17:44 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 1B 2F 00 00 01 0F 27 20 E2 04 23 E6 BC 01 00 04 CA Sat 05/01/2021 01:17:44 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:44 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 11 2F 00 00 01 0F 1F 20 62 04 2B A7 B6 01 00 04 8F Sat 05/01/2021 01:17:44 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:17:45 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 16 2F 00 00 01 0F 1F 20 62 04 2B A7 B6 01 00 04 8F Sat 05/01/2021 01:17:45 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Sat 05/01/2021 01:17:45 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 1B 2F 00 00 01 0F 1F 20 62 04 2B A7 B6 01 00 04 8F Sat 05/01/2021 01:17:45 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:46 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 1B 2F 00 00 01 0F 1F 20 62 04 2B A7 B6 01 00 04 8F Sat 05/01/2021 01:17:46 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:47 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 12 2F 00 00 01 0F 17 20 22 02 2B A7 B6 FF 1F 04 BC Sat 05/01/2021 01:17:47 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Sat 05/01/2021 01:17:48 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 16 2F 00 00 01 0F 0F 20 22 01 23 20 C1 FF 1F 04 49 Sat 05/01/2021 01:17:48 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Sat 05/01/2021 01:17:49 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 1B 2F 00 00 01 0F 07 20 00 00 00 00 00 00 00 00 9A Sat 05/01/2021 01:17:49 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:58 AM : [INST-TX-I2CS] 02 62 40 FA DA 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 C2 Sat 05/01/2021 01:17:58 AM : [INST-ACK ] 02 62 40.FA.DA 1F 2F 00 00 00 01 00 00 00 00 00 00 00 00 C2 C2 FA 06 (00) Sat 05/01/2021 01:17:58 AM : [INST-ACK ] 02 62 40.FA.DA 1F 2F 00 00 00 01 00 00 00 00 00 00 00 00 C2 C2 FA 06 (00): Duplicate or ACK for a different device Sat 05/01/2021 01:17:59 AM : [INST-SRX ] 02 50 40.FA.DA 40.52.B4 2B 2F 00 (00) Sat 05/01/2021 01:17:59 AM : [Std-Direct Ack] 40.FA.DA-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:17:59 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 11 2F 00 00 01 01 00 20 00 00 00 00 00 00 00 00 9A Sat 05/01/2021 01:17:59 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:18:00 AM : [INST-ERX ] 02 51 40 FA DA 40 52 B4 16 2F 00 00 01 01 00 20 00 00 00 00 00 00 00 00 9A Sat 05/01/2021 01:18:00 AM : [Ext-Direct ] 40.FA.DA-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Sat 05/01/2021 01:18:04 AM : [All ] Writing 0 bytes to devices Sat 05/01/2021 01:18:04 AM : [All ] Writing 0 bytes to devices Sat 05/01/2021 01:19:59 AM : [ Time] 01:20:00 20(0) Which looks like it's getting something. Doing the same operation for the microswitch does produce a list of 7 links, the event log however seems to show more data coming in: Sat 05/01/2021 01:23:56 AM : [INST-TX-I2CS] 02 62 2C 85 AF 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 C2 Sat 05/01/2021 01:23:56 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 C2 06 (00) Sat 05/01/2021 01:23:57 AM : [INST-SRX ] 02 50 2C.85.AF 40.52.B4 23 2F 00 (00) Sat 05/01/2021 01:23:57 AM : [Std-Direct Ack] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Sat 05/01/2021 01:23:57 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 11 2F 00 00 01 0F FF 00 A2 00 40 52 B4 FF 1F 01 BB Sat 05/01/2021 01:23:57 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:23:57 AM : [INST-TX-I2CS] 02 62 2C 85 AF 1F 2F 00 00 00 0F F7 01 00 00 00 00 00 00 00 00 CA Sat 05/01/2021 01:23:57 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 00 0F F7 01 00 00 00 00 00 00 00 00 CA 06 (00) Sat 05/01/2021 01:23:58 AM : [INST-SRX ] 02 50 2C.85.AF 40.52.B4 2F 2F 00 (00) Sat 05/01/2021 01:23:58 AM : [Std-Direct Ack] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sat 05/01/2021 01:24:00 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 13 2F 00 00 01 0F F7 00 22 01 54 5C 7D FF 1F 01 5B Sat 05/01/2021 01:24:00 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Sat 05/01/2021 01:24:00 AM : [INST-TX-I2CS] 02 62 2C 85 AF 1F 2F 00 00 00 0F EF 01 00 00 00 00 00 00 00 00 D2 Sat 05/01/2021 01:24:00 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 00 0F EF 01 00 00 00 00 00 00 00 00 D2 06 (00) Sat 05/01/2021 01:24:01 AM : [INST-SRX ] 02 50 2C.85.AF 40.52.B4 27 2F 00 (00) Sat 05/01/2021 01:24:01 AM : [Std-Direct Ack] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Sat 05/01/2021 01:24:01 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 12 2F 00 00 01 0F EF 00 22 01 32 88 79 FF 1F 01 5D Sat 05/01/2021 01:24:01 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Sat 05/01/2021 01:24:01 AM : [INST-TX-I2CS] 02 62 2C 85 AF 1F 2F 00 00 00 0F E7 01 00 00 00 00 00 00 00 00 DA Sat 05/01/2021 01:24:02 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 00 0F E7 01 00 00 00 00 00 00 00 00 DA 06 (00) Sat 05/01/2021 01:24:02 AM : [INST-SRX ] 02 50 2C.85.AF 40.52.B4 27 2F 00 (00) Sat 05/01/2021 01:24:02 AM : [Std-Direct Ack] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Sat 05/01/2021 01:24:03 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 12 2F 00 00 01 0F E7 00 22 01 32 85 EC FF 1F 01 F5 Sat 05/01/2021 01:24:03 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Sat 05/01/2021 01:24:03 AM : [INST-TX-I2CS] 02 62 2C 85 AF 1F 2F 00 00 00 0F DF 01 00 00 00 00 00 00 00 00 E2 Sat 05/01/2021 01:24:03 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 00 0F DF 01 00 00 00 00 00 00 00 00 E2 06 (00) Sat 05/01/2021 01:24:04 AM : [INST-SRX ] 02 50 2C.85.AF 40.52.B4 2F 2F 00 (00) Sat 05/01/2021 01:24:04 AM : [Std-Direct Ack] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sat 05/01/2021 01:24:04 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 11 2F 00 00 01 0F DF 00 A2 01 40 FA DA FF 1F 01 0C Sat 05/01/2021 01:24:04 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:24:04 AM : [INST-TX-I2CS] 02 62 2C 85 AF 1F 2F 00 00 00 0F D7 01 00 00 00 00 00 00 00 00 EA Sat 05/01/2021 01:24:04 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 00 0F D7 01 00 00 00 00 00 00 00 00 EA 06 (00) Sat 05/01/2021 01:24:05 AM : [INST-SRX ] 02 50 2C.85.AF 40.52.B4 2F 2F 00 (00) Sat 05/01/2021 01:24:05 AM : [Std-Direct Ack] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sat 05/01/2021 01:24:05 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 15 2F 00 00 01 0F D7 00 A2 05 2B FE 64 FF 1F 01 97 Sat 05/01/2021 01:24:05 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=1, Hops Left=1 Sat 05/01/2021 01:24:05 AM : [INST-TX-I2CS] 02 62 2C 85 AF 1F 2F 00 00 00 0F CF 01 00 00 00 00 00 00 00 00 F2 Sat 05/01/2021 01:24:05 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 00 0F CF 01 00 00 00 00 00 00 00 00 F2 06 (00) Sat 05/01/2021 01:24:06 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 17 2F 00 00 01 0F D7 00 A2 05 2B FE 64 FF 1F 01 97 Sat 05/01/2021 01:24:06 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Sat 05/01/2021 01:24:06 AM : [Ext MH ] Unexpected Response (i.e. DB range): ignored Sat 05/01/2021 01:24:07 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 17 2F 00 00 01 0F D7 00 A2 05 2B FE 64 FF 1F 01 97 Sat 05/01/2021 01:24:07 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Sat 05/01/2021 01:24:08 AM : [INST-SRX ] 02 50 2C.85.AF 40.52.B4 2B 2F 00 (00) Sat 05/01/2021 01:24:08 AM : [Std-Direct Ack] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:24:09 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 13 2F 00 00 01 0F CF 00 A2 1F 40 52 B4 FF 1F 01 CC Sat 05/01/2021 01:24:09 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Sat 05/01/2021 01:24:09 AM : [INST-TX-I2CS] 02 62 2C 85 AF 1F 2F 00 00 00 0F C7 01 00 00 00 00 00 00 00 00 FA Sat 05/01/2021 01:24:09 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 00 0F C7 01 00 00 00 00 00 00 00 00 FA 06 (00) Sat 05/01/2021 01:24:10 AM : [INST-SRX ] 02 50 2C.85.AF 40.52.B4 2F 2F 00 (00) Sat 05/01/2021 01:24:10 AM : [Std-Direct Ack] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sat 05/01/2021 01:24:11 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 1B 2F 00 00 01 0F C7 00 A2 2A 40 52 B4 FF 1F 01 C9 Sat 05/01/2021 01:24:11 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:24:11 AM : [INST-TX-I2CS] 02 62 2C 85 AF 1F 2F 00 00 00 0F BF 01 00 00 00 00 00 00 00 00 02 Sat 05/01/2021 01:24:11 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 00 0F BF 01 00 00 00 00 00 00 00 00 02 06 (00) Sat 05/01/2021 01:24:20 AM : [INST-TX-I2CS] 02 62 2C 85 AF 1F 2F 00 00 00 0F BF 01 00 00 00 00 00 00 00 00 02 Sat 05/01/2021 01:24:20 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 00 0F BF 01 00 00 00 00 00 00 00 02 02 06 (00) Sat 05/01/2021 01:24:20 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 00 0F BF 01 00 00 00 00 00 00 00 02 02 06 (00): Duplicate or ACK for a different device Sat 05/01/2021 01:24:21 AM : [INST-SRX ] 02 50 2C.85.AF 40.52.B4 2B 2F 00 (00) Sat 05/01/2021 01:24:21 AM : [Std-Direct Ack] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:24:21 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 11 2F 00 00 01 0F BF 00 A2 2D 40 52 B4 FF 1F 01 CE Sat 05/01/2021 01:24:21 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Sat 05/01/2021 01:24:22 AM : [INST-ERX ] 02 51 2C 85 AF 40 52 B4 17 2F 00 00 01 0F BF 00 A2 2D 40 52 B4 FF 1F 01 CE Sat 05/01/2021 01:24:22 AM : [Ext-Direct ] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Sat 05/01/2021 01:24:31 AM : [INST-TX-I2CS] 02 62 2C 85 AF 1F 2F 00 00 00 0F BF 01 00 00 00 00 00 00 00 00 02 Sat 05/01/2021 01:24:31 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 BF 01 00 00 00 00 00 00 00 00 02 02 02 06 (00) Sat 05/01/2021 01:24:31 AM : [INST-ACK ] 02 62 2C.85.AF 1F 2F 00 00 BF 01 00 00 00 00 00 00 00 00 02 02 02 06 (00): Duplicate or ACK for a different device Sat 05/01/2021 01:24:32 AM : [INST-SRX ] 02 50 2C.85.AF 40.52.B4 2B 2F 00 (00) Sat 05/01/2021 01:24:32 AM : [Std-Direct Ack] 2C.85.AF-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sat 05/01/2021 01:24:36 AM : [All ] Writing 0 bytes to devices Sat 05/01/2021 01:24:36 AM : [All ] Writing 0 bytes to devices And when I press the compare button, it would seem I'm right: To sum it up if you made it this far 1. Scene A contains 2 keypads and 1 micro module (on/off) 2. Scene will be triggered from ISY's REST API 3. 1 out of 100 times, it will not only turn on that light, but almost every other light in the house as well. 4. ISY seems unaware of this, in fact, it doesn't even list the scene as turning on even though the REST call explicitly turn it on 5. Show Device Links for most device is unreliable or doesn't work. Any advice on this situation would be most appreciated since this tends to happen mostly at night (of course) and it wakes up most of the house when it happens.

Stupid question perhaps, and sorry if I missed it, but what's the difference between the old ZWave cards and the new gen3?

Sorry, I should have been more clear, that was just an excerpt of the log, ALL zwave devices show the same error, no zwave device is able to communicate until I do the following: Reboot ISY Change antenna Then it works for about 8-24hrs and then it fail again. (for some reason quoting didn't happen @lilyoyo1 @simplextech)

And now it happened again, all zwave devices are offline and my log is filled with: Sun 01/05/2020 06:36:47 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Is my ZWave card fried? Switching antennas worked earlier, but this is the result today: Sun 01/05/2020 06:36:41 PM : [ZWAVE-WAKEUP 13.000] Query device ZW013_1 Sun 01/05/2020 06:36:41 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:36:42 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:36:47 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:36:47 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Sun 01/05/2020 06:36:48 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:36:49 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:36:53 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:36:53 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Sun 01/05/2020 06:36:54 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:36:55 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:00 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:37:00 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:01 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:06 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:37:06 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Sun 01/05/2020 06:37:06 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:07 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:12 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:37:12 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Sun 01/05/2020 06:37:13 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:14 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:18 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:37:18 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:19 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:24 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:37:24 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Sun 01/05/2020 06:37:25 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:26 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:31 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:37:31 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Sun 01/05/2020 06:37:31 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:32 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:37 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:37:37 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:38 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:43 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:37:43 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Sun 01/05/2020 06:37:43 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:44 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:49 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:37:49 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Sun 01/05/2020 06:37:49 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:50 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:37:55 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:38:03 PM : Setting Port 1 Serial RTS Off Sun 01/05/2020 06:38:03 PM : Setting Port 1 Serial RTS On Sun 01/05/2020 06:38:03 PM : [UZW-CMD 18 ] Set Active Antenna Sun 01/05/2020 06:38:11 PM : [ZWAVE-WAKEUP 13.000] Query device ZW013_1 Sun 01/05/2020 06:38:11 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:14 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:14 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[87AF0F913BF8118C] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:38:14 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:38:15 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[87AF0F913BF8118C] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:38:15 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[87AF0F913BF8118C] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:38:19 PM : [ZW-TX-FAILED] enc=Ok uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:38:19 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Sun 01/05/2020 06:38:20 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:20 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:20 PM : [ZWAVE-RX-ST ] No Device Ack Sun 01/05/2020 06:38:20 PM : [D2D EVENT ] Event [ZW013_1] [ERR] [1] uom=0 prec=-1 Sun 01/05/2020 06:38:20 PM : [ ZW013_1] ERR 1 Sun 01/05/2020 06:38:20 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:38:20 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Sun 01/05/2020 06:38:20 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[FA636A333B54FB8B] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:38:20 PM : [D2D EVENT ] Event [ZW013_1] [ERR] [0] uom=0 prec=-1 Sun 01/05/2020 06:38:20 PM : [ ZW013_1] ERR 0 Sun 01/05/2020 06:38:21 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:21 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:21 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[918E47AC4A5F1978] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:38:21 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:38:26 PM : [ZW-TX-FAILED] enc=Ok uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:38:26 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:26 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:26 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[1EEA755DB947D363] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:38:27 PM : [ZWAVE-RX-ST ] No Device Ack, trying again Sun 01/05/2020 06:38:27 PM : [ZW-TX-FAILED] enc=Ok uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:38:27 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Sun 01/05/2020 06:38:27 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:27 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:27 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[115C5C8C2CCA1FE7] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:38:27 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:38:32 PM : [ZW-TX-FAILED] enc=Ok uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:38:32 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Sun 01/05/2020 06:38:33 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:33 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:37 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:38:37 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:37 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:39 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[8B6D5342128BDB8E] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:38:39 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:38:39 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[8B6D5342128BDB8E] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:38:43 PM : [ZWAVE-RX-ST ] No Device Ack, trying again Sun 01/05/2020 06:38:43 PM : [ZW-TX-FAILED] enc=Ok uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:38:43 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Sun 01/05/2020 06:38:44 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:44 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:49 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:38:49 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Sun 01/05/2020 06:38:49 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:49 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:38:50 PM : [ZWAVE-RX-ST ] No Device Ack Sun 01/05/2020 06:38:50 PM : [D2D EVENT ] Event [ZW013_1] [ERR] [1] uom=0 prec=-1 Sun 01/05/2020 06:38:50 PM : [ ZW013_1] ERR 1 Sun 01/05/2020 06:38:50 PM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:38:51 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[F093AC75C69BCCB9] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:38:51 PM : [D2D EVENT ] Event [ZW013_1] [ERR] [0] uom=0 prec=-1 Sun 01/05/2020 06:38:51 PM : [ ZW013_1] ERR 0 Sun 01/05/2020 06:38:51 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[BA61263FEEE12DAE] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:03 PM : Setting Port 1 Serial RTS Off Sun 01/05/2020 06:39:04 PM : Setting Port 1 Serial RTS On Sun 01/05/2020 06:39:04 PM : [UZW-CMD 18 ] Set Active Antenna Sun 01/05/2020 06:39:11 PM : [ZWAVE-WAKEUP 13.000] Query device ZW013_1 Sun 01/05/2020 06:39:11 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:14 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:14 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[87A238C6BC82FAB5] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:15 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[9521C4D81E74BD7E] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:19 PM : [ZW-TX-FAILED] enc=Ok uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Sun 01/05/2020 06:39:19 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Sun 01/05/2020 06:39:19 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:19 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:20 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[083B3F4F072FDB89] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:20 PM : [ZWAVE-RX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:20 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:20 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:39:20 PM : [ZWAVE-RX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:20 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:21 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:39:21 PM : [ZWAVE-RX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:21 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:21 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:39:21 PM : [ZWAVE-RX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:21 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:21 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:39:21 PM : [ZWAVE-RX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:21 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:21 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:39:21 PM : [ZWAVE-RD ] [010A00130D03260363250074] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:22 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:22 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:22 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:39:22 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[2A247662C4987D75] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:22 PM : [ZWAVE-RX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:22 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:22 PM : [ZWAVE-RX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:22 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:23 PM : [ZWAVE-RD ] [010B00130D0433040200250011] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:23 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [03] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:23 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:24 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[939CA441840DA106] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:24 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[B5588FC2988D3A8C] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:24 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[B5588FC2988D3A8C] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:29 PM : [ZW-TX-FAILED] enc=Ok uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:39:29 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Sun 01/05/2020 06:39:29 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [03] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:29 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:29 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[9EDB1049CE9E1B91] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:29 PM : [ZWAVE-RX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:29 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:30 PM : [ZWAVE-RD ] [010B00130D04330403FF2500F5] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:30 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [04] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:30 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:31 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[2813443B2EC61069] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:31 PM : [ZWAVE-RX ZW011_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0B Sun 01/05/2020 06:39:31 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:31 PM : [ZWAVE-RD ] [010900130B0284072500B3] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:31 PM : [ZWAVE-WAKEUP 11] Awake with no pending work, putting back to sleep ZW011_1 Sun 01/05/2020 06:39:31 PM : [ZWAVE-RX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:31 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:31 PM : [ZWAVE-RD ] [010B00130D0433040400250003] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:32 PM : [ZWAVE-TE ] [84/08] Wakeup No More Information ACK,AUTO,EXPLORE To=0x0B Sun 01/05/2020 06:39:32 PM : [ZWAVE-TX ZW011_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0B Sun 01/05/2020 06:39:32 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:39:32 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[36479C7834AE0295] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:32 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[36479C7834AE0295] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:32 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[36479C7834AE0295] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:33 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[36479C7834AE0295] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:33 PM : [ZWAVE-RD ] [010B00130D0433040400250005] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:33 PM : [ZWAVE-RD ] [010B00130D0433040400250006] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:34 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[D7CE01975C836CF4] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:35 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[02C52BC263168B72] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:37 PM : [ZW-TX-FAILED] enc=Fail uid=11.0 cmd=0x84.08 WAKE_UP Sun 01/05/2020 06:39:37 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Sun 01/05/2020 06:39:37 PM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:37 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:37 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[80AA81613C8A747B] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:37 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[80AA81613C8A747B] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:37 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[80AA81613C8A747B] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:37 PM : [ZWAVE-RX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:37 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:38 PM : [ZWAVE-RD ] [010A00130D03260363250066] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:38 PM : [ZWAVE-RD ] [010A00130D03260363250065] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:38 PM : [ZWAVE-RD ] [010A00130D03260363250064] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:38 PM : [ZWAVE-TE ] [84/08] Wakeup No More Information ACK,AUTO,EXPLORE To=0x0B Sun 01/05/2020 06:39:38 PM : [ZWAVE-TX ZW011_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0B Sun 01/05/2020 06:39:38 PM : [ZWAVE-RX ZW011_1] [98/80] Security Nonce Report - nonce=[669D1DDB18DCEBFD] ACK,AUTO,EXPLORE From=0x0B Sun 01/05/2020 06:39:38 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:38 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:41 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[E44CECAEA87C6597] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:41 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[E44CECAEA87C6597] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:41 PM : [ZWAVE-RX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:41 PM : [ZWAVE-TX ] ... Sun 01/05/2020 06:39:41 PM : [ZWAVE-RD ] [010B00130D043304020025000B] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:41 PM : [ZWAVE-RD ] [010B00130D0433040200250008] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:42 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [03] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:42 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:42 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:39:42 PM : [ZWAVE-RD ] [010B00130D0433040200250006] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:42 PM : [ZWAVE-RD ] [010B00130D0433040200250007] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:42 PM : [ZWAVE-RD ] [010B00130D0433040200250004] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:42 PM : [ZWAVE-RD ] [010B00130D0433040200250005] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:43 PM : [ZWAVE-RD ] [010B00130D0433040200250002] REQ ZW_SEND_DATA Sun 01/05/2020 06:39:45 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[814ED21B0952C5E4] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:45 PM : [ZWAVE-RX-ST ] No Device Ack, trying again Sun 01/05/2020 06:39:45 PM : [ZW-TX-FAILED] enc=Ok uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:39:45 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Sun 01/05/2020 06:39:45 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[241DC9FB866D6690] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:45 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [03] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:45 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:45 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:39:46 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[241DC9FB866D6690] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:46 PM : [ZWAVE-RX-ST ] Send queue full Sun 01/05/2020 06:39:46 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[241DC9FB866D6690] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:46 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[241DC9FB866D6690] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:47 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[241DC9FB866D6690] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:47 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[241DC9FB866D6690] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:51 PM : [ZW-TX-FAILED] enc=Ok uid=13.0 cmd=0x33.03 SWITCH_COLOR Sun 01/05/2020 06:39:51 PM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Sun 01/05/2020 06:39:51 PM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [03] ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:51 PM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Sun 01/05/2020 06:39:52 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[CB0E930FB01814D4] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:52 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[9304806E538ABBD6] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:52 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[9304806E538ABBD6] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:53 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[9304806E538ABBD6] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:53 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[9304806E538ABBD6] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:53 PM : [ZWAVE-RX ZW013_1] [98/80] Security Nonce Report - nonce=[9304806E538ABBD6] ACK,AUTO,EXPLORE From=0x0D Sun 01/05/2020 06:39:57 PM : [ZW-TX-FAILED] enc=Ok uid=13.0 cmd=0x33.03 SWITCH_COLOR

Odd, I changed antenna from internal to external and now it's seeing nodes again.

Nope, power cycle made no difference. Running Zwave 4.55.00 bootloader 1.03 on a (Oups, I see I never upgraded to version B. But still, it should still have been able to use Z-wave.)

Today when I woke up I found that the ISY no longer was able to communicate over ZWave. All zwave devices are marked as offline all of the sudden. I tried rebooting the ISY994 but it made no difference. And we're talking about Aeotec Repeaters, GE Outlets, Aeotec Motion sensors with USB power, Fibraro LED controllers, essentially everything which should have been working. And when I move one of the repeaters close and press the button to do a mesh health check (it will simply try to communicate with the ISY) it shows red. It's as if the ZWave card is fried. I'm running 5.0.16B and I had removed and re-paired all zwave devices after that. And yesterday it was working fine. Today I cannot even heal the network because it thinks no devices are responding. This is the level 3 log from healing: Elapsed 00:00:07.940 : Loading Variables Elapsed 00:00:08.363 : Loading Node Definitions Elapsed 00:00:08.610 : Loading Nodes Elapsed 00:00:10.171 : Creating Widgets Elapsed 00:00:11.929 : Creating Widgets Complete Fri 01/03/2020 10:05:23 AM : Starting Subscription Fri 01/03/2020 10:05:24 AM : Completing initialization Fri 01/03/2020 10:05:24 AM : Refreshing Status Fri 01/03/2020 10:05:25 AM : Refreshing Views Fri 01/03/2020 10:05:27 AM : [ ZW003_1] ERR 1 Fri 01/03/2020 10:05:27 AM : [ZW-TX-FAILED] enc=Fail uid=3.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:05:32 AM : [ZW-TX-FAILED] enc=Fail uid=3.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:05:38 AM : [ZW-TX-FAILED] enc=Fail uid=3.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:05:43 AM : [ZW-TX-FAILED] enc=Fail uid=12.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:05:48 AM : [ ZW012_1] ERR 1 Fri 01/03/2020 10:05:48 AM : [ZW-TX-FAILED] enc=Fail uid=12.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:05:48 AM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Fri 01/03/2020 10:05:49 AM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:05:49 AM : [ZWAVE-TX ZW012_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:05:54 AM : [D2D EVENT ] Event [ZW012_1] [ERR] [0] uom=0 prec=-1 Fri 01/03/2020 10:05:54 AM : [ ZW012_1] ERR 0 Fri 01/03/2020 10:05:54 AM : [ZW-TX-FAILED] enc=Fail uid=12.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:05:54 AM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:05:54 AM : [ZWAVE-TX ZW012_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:05:59 AM : [ZW-TX-FAILED] enc=Fail uid=12.0 cmd=0x33.03 SWITCH_COLOR Fri 01/03/2020 10:05:59 AM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Fri 01/03/2020 10:06:00 AM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:06:00 AM : [ZWAVE-TX ZW012_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:06:05 AM : [ZWAVE-RX-ST ] No Device Ack Fri 01/03/2020 10:06:05 AM : [D2D EVENT ] Event [ZW012_1] [ERR] [1] uom=0 prec=-1 Fri 01/03/2020 10:06:05 AM : [ ZW012_1] ERR 1 Fri 01/03/2020 10:06:05 AM : [ZW-TX-FAILED] enc=Fail uid=12.0 cmd=0x33.03 SWITCH_COLOR Fri 01/03/2020 10:06:05 AM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Fri 01/03/2020 10:06:05 AM : [ZWAVE-TE ] [33/03] CC=0x33 cmd=0x03 [02] ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:06:05 AM : [ZWAVE-TX ZW012_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:06:10 AM : [D2D EVENT ] Event [ZW012_1] [ERR] [0] uom=0 prec=-1 Fri 01/03/2020 10:06:10 AM : [ ZW012_1] ERR 0 Fri 01/03/2020 10:06:10 AM : [ZW-TX-FAILED] enc=Fail uid=12.0 cmd=0x33.03 SWITCH_COLOR Fri 01/03/2020 10:06:10 AM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:06:10 AM : [ZWAVE-TX ZW012_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:06:10 AM : [ZWAVE-RX-ST ] No Device Ack Fri 01/03/2020 10:06:10 AM : [D2D EVENT ] Event [ZW012_1] [ERR] [1] uom=0 prec=-1 Fri 01/03/2020 10:06:10 AM : [ ZW012_1] ERR 1 Fri 01/03/2020 10:06:10 AM : [ZW-TX-FAILED] enc=Fail uid=12.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:06:10 AM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Fri 01/03/2020 10:06:11 AM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:06:11 AM : [ZWAVE-TX ZW012_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:06:16 AM : [D2D EVENT ] Event [ZW012_1] [ERR] [0] uom=0 prec=-1 Fri 01/03/2020 10:06:16 AM : [ ZW012_1] ERR 0 Fri 01/03/2020 10:06:16 AM : [ZW-TX-FAILED] enc=Fail uid=12.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:06:16 AM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Fri 01/03/2020 10:06:16 AM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:06:16 AM : [ZWAVE-TX ZW012_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0C Fri 01/03/2020 10:06:16 AM : [ZWAVE-RX-ST ] No Device Ack Fri 01/03/2020 10:06:16 AM : [D2D EVENT ] Event [ZW012_1] [ERR] [1] uom=0 prec=-1 Fri 01/03/2020 10:06:16 AM : [ ZW012_1] ERR 1 Fri 01/03/2020 10:06:16 AM : [ZW-TX-FAILED] enc=Fail uid=12.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:06:16 AM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Fri 01/03/2020 10:06:16 AM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Fri 01/03/2020 10:06:21 AM : [ZWAVE-RX-ST ] No Device Ack Fri 01/03/2020 10:06:21 AM : [D2D EVENT ] Event [ZW013_1] [ERR] [1] uom=0 prec=-1 Fri 01/03/2020 10:06:21 AM : [ ZW013_1] ERR 1 Fri 01/03/2020 10:06:21 AM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:06:21 AM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 1 of 2 Fri 01/03/2020 10:06:22 AM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Fri 01/03/2020 10:06:22 AM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Fri 01/03/2020 10:06:22 AM : [ZWAVE-RX-ST ] No Device Ack Fri 01/03/2020 10:06:22 AM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:06:22 AM : [ZWAVE-TX-E ] ZWAVE-WAIT Waiting for retry 2 of 2 Fri 01/03/2020 10:06:23 AM : [ZWAVE-TE ] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0D Fri 01/03/2020 10:06:23 AM : [ZWAVE-TX ZW013_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE To=0x0D Fri 01/03/2020 10:06:27 AM : [ZWAVE-RX-ST ] No Device Ack Fri 01/03/2020 10:06:27 AM : [ZW-TX-FAILED] enc=Fail uid=13.0 cmd=0x26.02 SWITCH_MULTILEVEL Fri 01/03/2020 10:06:27 AM : [ZWAVE-TX ZW014_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:06:28 AM : [ZWAVE-RX-ST ] No Device Ack, trying again Fri 01/03/2020 10:06:28 AM : [ZWAVE-WAIT ] Waiting 47 ticks for retry 1 of 2 Fri 01/03/2020 10:06:30 AM : [ZWAVE-TX ZW014_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:06:32 AM : [ZWAVE-RX-ST ] No Device Ack, trying again Fri 01/03/2020 10:06:32 AM : [ZWAVE-WAIT ] Waiting 45 ticks for retry 2 of 2 Fri 01/03/2020 10:06:34 AM : [ZWAVE-TX ZW014_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:06:35 AM : [ZWAVE-RX-ST ] No Device Ack Fri 01/03/2020 10:06:35 AM : [D2D EVENT ] Event [ZW014_1] [ERR] [1] uom=0 prec=-1 Fri 01/03/2020 10:06:35 AM : [ ZW014_1] ERR 1 Fri 01/03/2020 10:06:35 AM : [ZW-TX-FAILED] 14.0/0x26.02 Fri 01/03/2020 10:06:35 AM : [ZWAVE-TX ZW014_001_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:06:40 AM : [ZWAVE-RX-ST ] No Device Ack, trying again Fri 01/03/2020 10:06:40 AM : [ZWAVE-WAIT ] Waiting 47 ticks for retry 1 of 2 Fri 01/03/2020 10:06:42 AM : [ZWAVE-TX ZW014_001_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:06:47 AM : [ZWAVE-WAIT ] Waiting 20 ticks for retry 2 of 2 Fri 01/03/2020 10:06:48 AM : [ZWAVE-TX ZW014_001_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:06:53 AM : [D2D EVENT ] Event [ZW014_1] [ERR] [0] uom=0 prec=-1 Fri 01/03/2020 10:06:53 AM : [ ZW014_1] ERR 0 Fri 01/03/2020 10:06:53 AM : [ZW-TX-FAILED] 14.1/0x26.02 Fri 01/03/2020 10:06:53 AM : [ZWAVE-TX ZW014_002_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:06:53 AM : [ZWAVE-RX-ST ] No Device Ack, trying again Fri 01/03/2020 10:06:53 AM : [ZWAVE-WAIT ] Waiting 44 ticks for retry 1 of 2 Fri 01/03/2020 10:06:55 AM : [ZWAVE-TX ZW014_002_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:06:58 AM : [ZWAVE-RX-ST ] No Device Ack, trying again Fri 01/03/2020 10:06:58 AM : [ZWAVE-WAIT ] Waiting 43 ticks for retry 2 of 2 Fri 01/03/2020 10:07:00 AM : [ZWAVE-TX ZW014_002_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:07:00 AM : [ZWAVE-RX-ST ] No Device Ack Fri 01/03/2020 10:07:00 AM : [D2D EVENT ] Event [ZW014_1] [ERR] [1] uom=0 prec=-1 Fri 01/03/2020 10:07:00 AM : [ ZW014_1] ERR 1 Fri 01/03/2020 10:07:00 AM : [ZW-TX-FAILED] 14.2/0x26.02 Fri 01/03/2020 10:07:01 AM : [ZWAVE-TX ZW014_003_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:07:05 AM : [ZWAVE-RX-ST ] No Device Ack, trying again Fri 01/03/2020 10:07:05 AM : [ZWAVE-WAIT ] Waiting 40 ticks for retry 1 of 2 Fri 01/03/2020 10:07:07 AM : [ZWAVE-TX ZW014_003_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:07:12 AM : [ZWAVE-WAIT ] Waiting 24 ticks for retry 2 of 2 Fri 01/03/2020 10:07:14 AM : [ZWAVE-TX ZW014_003_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:07:19 AM : [D2D EVENT ] Event [ZW014_1] [ERR] [0] uom=0 prec=-1 Fri 01/03/2020 10:07:19 AM : [ ZW014_1] ERR 0 Fri 01/03/2020 10:07:19 AM : [ZW-TX-FAILED] 14.3/0x26.02 Fri 01/03/2020 10:07:19 AM : [ZWAVE-TX ZW014_004_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:07:19 AM : [ZWAVE-RX-ST ] No Device Ack, trying again Fri 01/03/2020 10:07:19 AM : [ZWAVE-WAIT ] Waiting 46 ticks for retry 1 of 2 Fri 01/03/2020 10:07:21 AM : [ZWAVE-TX ZW014_004_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:07:24 AM : [ZWAVE-RX-ST ] No Device Ack, trying again Fri 01/03/2020 10:07:24 AM : [ZWAVE-WAIT ] Waiting 44 ticks for retry 2 of 2 Fri 01/03/2020 10:07:26 AM : [ZWAVE-TX ZW014_004_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:07:26 AM : [ZWAVE-RX-ST ] No Device Ack Fri 01/03/2020 10:07:26 AM : [D2D EVENT ] Event [ZW014_1] [ERR] [1] uom=0 prec=-1 Fri 01/03/2020 10:07:26 AM : [ ZW014_1] ERR 1 Fri 01/03/2020 10:07:26 AM : [ZW-TX-FAILED] 14.4/0x26.02 Fri 01/03/2020 10:07:26 AM : [ZWAVE-TX ZW014_005_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:07:31 AM : [ZWAVE-RX-ST ] No Device Ack, trying again Fri 01/03/2020 10:07:31 AM : [ZWAVE-WAIT ] Waiting 43 ticks for retry 1 of 2 Fri 01/03/2020 10:07:33 AM : [ZWAVE-TX ZW014_005_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:07:38 AM : [ZWAVE-WAIT ] Waiting 21 ticks for retry 2 of 2 Fri 01/03/2020 10:07:39 AM : [ZWAVE-TX ZW014_005_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x0E Fri 01/03/2020 10:07:44 AM : [D2D EVENT ] Event [ZW014_1] [ERR] [0] uom=0 prec=-1 Fri 01/03/2020 10:07:44 AM : [ ZW014_1] ERR 0 Fri 01/03/2020 10:07:44 AM : [ZW-TX-FAILED] 14.5/0x26.02 Fri 01/03/2020 10:07:49 AM : [ Time] 10:07:49 0(0) Fri 01/03/2020 10:07:49 AM : [ Time] 10:07:49 0(0) Fri 01/03/2020 10:07:49 AM : [INST-TX-I1 ] 02 62 00 00 3A CF 14 00 Fri 01/03/2020 10:07:49 AM : [INST-ACK ] 02 62 00.00.3A CF 14 00 06 LTOFF-F(00) Next I'm going to pull the plug and see if a power cycle will revive my system. Any suggestions are welcomed

After upgrading from the last stable 4.x version to this, I was hoping that the Zwave support would be better (had some devices which had nodes which wouldn't show up) but instead I find that most of my battery operated sensors (Aeotec recessed door sensors) now rarely works. It will join all right and it works for what seems for 24hrs but then I keep getting errors from ISY saying that it cannot query the sensors (well, duh, it's battery operated so dead until door opens/closes). Anyone else experienced this with 5.0.16RC1 and battery operated devices (especially aeotec recessed door sensor gen 5).

I just find it odd it would take 5 years to happen to one KPL for case #2 and a few months for case #1 and every other KPL (4 more) work fine at 5years with 2-6 LEDs of the exact same make and brand (yeah, I know, I jinxed it now ).

In case #1, the KPL could turn off the load, no problem, just the local button on the KPL didn't work at all, neither on/off In case #2, the KPL isn't even controlling the load. It's simply issuing the DON/DOF command to the scene, which is connected to a SwitchLinc Dimmer which works just fine. It did however show the correct state once the state was changed from any other member of the scene. All other buttons worked except for the office button. Even the on/off for the 2x 10w LED lights (yes, same kind). The real pain I see here is that my entire house runs on LED lighting connected to SwitchLinc or KeypadLinc Dimmers. If the snubber solves this, that would be awesome. But what I don't get is that Insteon lists the devices as compatible with LED lighting (incandescent lighting and inductive Loads, see http://www.smarthome.com/insteon-2334-222-keypad-dimmer-switch-dual-band-8-button-white.html, specs section) ... Is there any way to confirm that my LED lights are inductive ?

Thanks, I'll give that a try

I have monitoring programs for all my motion sensors for the case of low battery, yet I've never received them. Can anyone share their program so I can see what I've been doing wrong? Thanks

Here's the video showing the issue I was having last night: https://goo.gl/photos/EAqu3emBCvZHZdhC6 The device which is malfunctioning isn't connected the load (which might be obvious since I'm not using button #1 but hey ) I resolved it by factory reset the device, but I'm concerned that TWO devices in TWO days malfunctioned the same way, with the only difference being that on one device it wasn't able to toggle its own load locally but it worked from any other member of the scene.

I thought it was clear from my posts that the device itself is able to control the connected load, it's just that (in case #1) that the keypad ON the device wouldn't work while all other members of the scene could control it. And in case #2 the device which was malfunctioning wasn't the one with the attached load. So the testing you're proposing isn't useful and in my case impossible since these lights are built-in LEDs and cannot be changed without replacing the can in the ceiling.

So the KeypadLinc Dimmer now works after the restore. But now another KeypadLinc Dimmer is behaving similarly. It's unable to properly handle a scene which controls the light in an adjacent room. I've tried air gapping it but it does not help. It's able to issue the power on, but it never realizes that power has changed. The room light turns on and other controllers (including the previous day KeypadLinc Dimmer) is showing the correct status. I've tried unplugging EVERY SINGLE electrical item on that circuit but it made no difference. I've airgapped all other devices which are related to this scene and still no change. ISY reports this when I press the scene button and the lights come on in the room (but the Keylinc Dimmer shows it as off): Mon 01/23/2017 06:10:14 PM : [INST-SRX ] 02 50 28.A0.AA 00.00.04 CF 11 00 LTONRR (00) Mon 01/23/2017 06:10:14 PM : [Std-Group ] 28.A0.AA-->Group=4, Max Hops=3, Hops Left=3 Mon 01/23/2017 06:10:14 PM : [D2D EVENT ] Event [28 A0 AA 4] [DON] [0] uom=0 prec=-1 Mon 01/23/2017 06:10:14 PM : [ 28 A0 AA 4] DON 0 Mon 01/23/2017 06:10:14 PM : [D2D EVENT ] Event [22 65 BE 1] [ST] [255] uom=0 prec=-1 Mon 01/23/2017 06:10:14 PM : [ 22 65 BE 1] ST 255 Mon 01/23/2017 06:10:14 PM : [D2D EVENT ] Event [28 A0 AA 4] [ST] [255] uom=0 prec=-1 Mon 01/23/2017 06:10:14 PM : [ 28 A0 AA 4] ST 255 Mon 01/23/2017 06:10:14 PM : [D2D EVENT ] Event [40 FC B3 4] [ST] [255] uom=0 prec=-1 Mon 01/23/2017 06:10:14 PM : [ 40 FC B3 4] ST 255 Mon 01/23/2017 06:10:14 PM : [INST-SRX ] 02 50 28.A0.AA 11.01.04 CF 06 00 (00) Mon 01/23/2017 06:10:14 PM : [Std-Group ] 28.A0.AA-->11.01.04, Max Hops=3, Hops Left=3 Mon 01/23/2017 06:10:14 PM : [INST-INFO ] Previous message ignored. 28 A0 AA is the offending KeypadLinc Dimmer 22 65 BE is the device being controlled (ie, has the lights connected) 40 FC B3 is the previously erratic KeypadLinc Dimmer Issuing on from the 40 FC B3 device results in this output: Mon 01/23/2017 06:16:59 PM : [INST-SRX ] 02 50 40.FC.B3 00.00.04 CF 11 00 LTONRR (00) Mon 01/23/2017 06:16:59 PM : [Std-Group ] 40.FC.B3-->Group=4, Max Hops=3, Hops Left=3 Mon 01/23/2017 06:16:59 PM : [D2D EVENT ] Event [40 FC B3 4] [DON] [0] uom=0 prec=-1 Mon 01/23/2017 06:16:59 PM : [ 40 FC B3 4] DON 0 Mon 01/23/2017 06:16:59 PM : [D2D EVENT ] Event [22 65 BE 1] [ST] [255] uom=0 prec=-1 Mon 01/23/2017 06:16:59 PM : [ 22 65 BE 1] ST 255 Mon 01/23/2017 06:16:59 PM : [D2D EVENT ] Event [28 A0 AA 4] [ST] [255] uom=0 prec=-1 Mon 01/23/2017 06:16:59 PM : [ 28 A0 AA 4] ST 255 Mon 01/23/2017 06:16:59 PM : [D2D EVENT ] Event [40 FC B3 4] [ST] [255] uom=0 prec=-1 Mon 01/23/2017 06:16:59 PM : [ 40 FC B3 4] ST 255 Mon 01/23/2017 06:17:00 PM : [INST-SRX ] 02 50 40.FC.B3 40.52.B4 45 11 04 LTONRR (04) Mon 01/23/2017 06:17:00 PM : [Std-Cleanup ] 40.FC.B3-->ISY/PLM Group=4, Max Hops=1, Hops Left=1 Mon 01/23/2017 06:17:00 PM : [INST-DUP ] Previous message ignored. Mon 01/23/2017 06:17:00 PM : [INST-SRX ] 02 50 40.FC.B3 11.03.04 CB 06 00 (00) Mon 01/23/2017 06:17:00 PM : [Std-Group ] 40.FC.B3-->11.03.04, Max Hops=3, Hops Left=2 Mon 01/23/2017 06:17:00 PM : [INST-INFO ] Previous message ignored. And it works. Another difference is that the working device will change indicator to ON almost immediately, while the non-functional one will flash the pressed scene button and give up. In both cases, the light in the room turns on but only on the 40.* device will the button show the status. I've recorded a video of this and will share as soon as it's available on youtube since a video says more than a thousand words. I'm also factory resetting it to see if it helps.