btreinders

I reconnected the skill, still not working. I created an entire new routine with a new variable. Worked. I used a new value and a new routine with the same variable in the ISY. Worked. I then deleted a routine and created a new one the exact same. Worked. All my routines are missing the device and just updating that device does not fix them and I have no idea what made them remove the device. I guess I will delete all of them and re-create them. Thank you for the help.

This has stopped working all of a sudden. Is anyone else seeing the same? In the ALexa app the device was no longer in there so I added it back but still will not work when I trigger the device.

Same, with 5.3.3. I only have Synchronize and now when I add a device to Smartthings using the ISY as the secondary controller I can't get the device to show up in the ISY like it would before using repair links. Synchronize New and Deleted and All do not add them either. Any ideas on how to get new zwave devices from Smartthings into the ISY now?

Yes, but he didn't have an answer for the folder issue or the all programs become enabled issue. He did give me the idea for the program to disable all programs that need to be so I can recover quicker.

I never did find a fix for the folder condition issue so I have since added the state variable to all If conditions of all disabled programs. Big pain to do and I will have to remember that any future disabled programs with an If condition will need this addition. I even tried two variables for the If condition for the folder but it still would stop execution without both variables changing to true.

One thing that bit me was not putting the memory expansion back into Java after I had updated Java. Without that I cannot load programs in the admin console at all. If the admin console is slow to respond, it is likely you need to increase the amount of memory allocated to the Java runtime (JRE). Open the Java Control Panel, select Java tab, press View button, then add or modify the Runtime Parameter -Xmx to the following: -Xmx512m Press Ok to close the window, then Press Apply to save the changes

Thanks Bumbershoot! Not sure how I missed this reply. So, I created a ticket and the only things they can suggest is swap out SD card (done), send all the logs when it happens (done) and update to the latest version 5.3.1 (Done, previously I was on 5.3.0). They were not able to figure out why all the programs become enabled and it is still doing it with all the changes. Another suggestion they gave was to create a program that would disable all the programs that need to be. I did that but once they all become enabled the ISY is so overwhelmed I can't get it to run the disable program and I still have to hard reset and restore. So to combat that issue I put all of my programs into a folder just under the top level with only a few programs left top level that are not in that folder. I created a state variable in a program top level that would get set if that program becomes enabled and used that variable as a condition on the folder where all the other programs are not located. That way if all programs become enabled it will stop executing and I can run the disable programs program and be back up and running much quicker than a hard reset and restore. Now I am fighting an issue where that folder randomly goes red but the variable in the condition has not changed. I do use this method for another folder inside this folder and have never experienced this issue.

930 PGM files now. Was 1288 before deleting the irrigation programs. Thanks again!

I finally had to quit using the ISY altogether for locks. I now use Smartthings to control them and Webcore to send ST lock status to the ISY so the ISY can announce status through my Elk M1 and update my widgets on my phone. I have the ISY use IFTTT to send lock and unlock commands to ST since I have not gotten the rest interface working for ISY to ST communications yet. Not optimal but works way better than the ISY natively. Mine are Kwikset though.

Thanks Larry! I could not get the second zip file to show anything in it but I used the first method. With folders and programs I counted 53 per page and 22 pages. Plus 30 more on the last page. That's 1196 after deleting all my irrigation programs yesterday (I bought a Rachio last summer). I did see in another thread that Chris Jahn had stated they doubled the amount of programs you could have a while back. Sounds like once you hit the limit (which is really memory) it will not allow new ones to be created. Right now the SM command in the serial interface shows I have more free than used. 410 used, 624 free. Guess I will just work with Michel on the ticket I submitted. Thanks to all!

Well, I guess I was counting programs from Topology and I just realized that is not programs at all. Anyone know an easy way to count them?

I have deleted enough to get below 1024, will give it a shot. Thanks!

No, I do not have any devices waiting for an update to be written. Thanks Bumbershoot

What is an 1101 code? Polyglot devices? If so, yes, I have a lot of them.

Yes, both are 5.2.0. I do use the launcher.

I just counted and I have 246 programs disabled out of about 1300 programs total. Now not all of them would cause issues I suspect but I'd bet 200 of them would. That would mean 200 more variables to contend with and managing their initial states as well if the ISY reboots. One example I use a disabled program other than device toggling based on state of the device is to not trigger certain programs but do trigger other ones when a state variable changes. I run the if condition on the disabled programs based on other things. I have a variable called GUESTS and I set it manually or with a voice assistant like Alexa or Google Home when we have guests. I don't want it to execute some of the programs but do want it execute others when it changes. I could create a duplicate integer guests but again I have many of these types of situations and would need integer variables for a lot of them. Maybe I could use a state variable with different values too but that would take a lot of effort as well. Another example would be ceiling fan speeds, I adjust them based on outside temperatures and other conditions. I don't want them turning on every time the outside temp changes 1 degree since I might have turned them off manually. Could be taken care of with a new variable as well but more work and testing involved to get it right. I already have over 100 integer variables and 275 states ones to deal with. To me, changing all of that would take far longer than just dealing with the issue. Even though when the issue happens I have to hard reset the ISY and restore it. I just hope UDI can figure out what is causing it. I will submit a ticket. When this happens it is every single program that was disabled so I don't think it is something in the programming that could be triggering it. I finally wrote a program that if becomes enabled will try to stop the ISY from executing and notify me. It sets a variable that the top level ISY folder needs to be false to execute. Problem is that it is so overwhelmed it never get the notification to me and I just have to figure it out by seeing issues first. It at least lets me log in to the admin console to see what happened. Without it I cannot even do that and have to just guess that is what happened and hard reset.

It isn't happening during an upgrade, it is happening while the ISY is just running. In the past this was the best way to get UDI to address issues, I guess that has changed. I will submit a ticket. I am not enabling and disabling on he fly, I just have many programs that are disabled for many different reasons and using variables iMO would be far more complicated. For example, I have a light program that is disabled because the condition is if the light is on then turn it off and if it is off then turn it on. When it suddenly becomes enabled if cycles on and off continuously. When you have over 200 of those going on and off it crushes the ISY. Thank you for the replies.

@Michel Kohanim Any ideas? Third time now. Very frustrating.

This has happened twice in the last month. Running 5.2.0. The only way to recover is to restore the ISY. Anyone have any idea why this could happen? Thanks! @Michel Kohanim

What do you guys use for a spoken? Or am I missing something? To expose the state variable I have to give it a spoken. Am I doing this all wrong? Thanks!

I tried that several different times and tried a sync on just the lock, no change. Thanks!

When I upgraded to 5.2.0 and new 500 board and did a restore, all of my zwave devices were fine. The next day I saw a lot more devices (just additional functions I think for existing ones) and my Kwikset door lock had changed names and has no lock/unlock function anymore. Guess that happened during the overnight query? Anyone else have a Kwikset convert door lock that will not work anymore? Guess I will be going back to 5.0.16C for now, I have to have the door lock working.

Thanks, it had reset! I didn't realize you had to change every time. It is much better but still not 100%. I had noticed that it had slowed way down as well so I should have known.

I can always connect, it just pops up as I am using it or letting it sit idle. I checked the memory and it seems to cycle down to about 35% free and then back up to 60% or so and then repeats. Had a lot of failed to initialize errors starting up too. Java Web Start 11.241.2.07 Using JRE version 1.8.0_241-b07 Java HotSpot(TM) Client VM JRE expiration date: 5/17/20 12:00 AM console.user.home = C:\Users\Brent ---------------------------------------------------- ? clear console window f: finalize objects on finalization queue g: garbage collect h: display this help message m: print memory usage o: trigger logging p: reload proxy configuration q: hide console r: reload policy configuration s: dump system and deployment properties t: dump thread list v: dump thread stack 0-5: set trace level to <n> ---------------------------------------------------- addNodeDefs invalid entry ----<nodeDef ID="TEMPERATURE" NLS="TMP"> <sts> <st ID="ST" EDITOR="CTL_ST"/> <st ID="CLISPH" EDITOR="CTL_TEMP"/> <st ID="CLITEMP" EDITOR="CTL_TEMP"/> <st ID="CLISPH" EDITOR="CTL_TEMP" HIDE="T"/> <st ID="CLIMD" EDITOR="CTL_TEMP" HIDE="T"/> </sts> <cmds> <sends/> <accepts> <cmd ID="DON"/> <cmd ID="DOF"/> <cmd ID="SET_TEMP"> <p ID="" EDITOR="CTL_TEMP" INIT="CLISPH"/> </cmd> </accepts> </cmds> </nodeDef> ---- java.lang.IllegalArgumentException: U7DriverControl dup param [CLISPH] at com.universaldevices.u7.U7DriverControl.fail(Unknown Source) at com.universaldevices.u7.U7DriverControl.<init>(Unknown Source) at com.universaldevices.u7.U7DriverControl.newStatus(Unknown Source) at com.universaldevices.u7.U7NodeDef.<init>(Unknown Source) at com.universaldevices.u7.U7NodeDefs.addNodeDefs(Unknown Source) at com.universaldevices.u7.U7NodeDefs.addNodeDefs(Unknown Source) at com.universaldevices.u7.U7NodeDefs.addNodeDefs(Unknown Source) at com.universaldevices.uxt.UXTProfileDownloader.registerProfile(Unknown Source) at com.universaldevices.uxt.UXTProfileDownloader.loadAllProfiles(Unknown Source) at com.universaldevices.uxt.UXTNodeServerMgr.loadProfiles(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_BUTTON failed to initialize java.lang.IllegalArgumentException: [F10.I1] editor [Btn52751079] not found, ndef=[d52751079] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_ACTIVITY failed to initialize java.lang.IllegalArgumentException: [F10.I1] editor [ActDefault] not found, ndef=[HubDefault] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_BUTTON failed to initialize java.lang.IllegalArgumentException: [F10.I1] editor [BtnDefault] not found, ndef=[DeviceDefault] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_COLOR_RGB failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLRGB] not found, ndef=[SmartBulb_DTCE] parm=[R] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_COLOR_XY failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLXY] not found, ndef=[SmartBulb_DTCE] parm=[X] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_COLOR failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCSEL] not found, ndef=[SmartBulb_DTCE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_HUE failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLHUE] not found, ndef=[SmartBulb_DTCE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_SAT failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLSAT] not found, ndef=[SmartBulb_DTCE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_BRI failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLBRI] not found, ndef=[SmartBulb_DTCE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) CLITEMP failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HKELVIN] not found, ndef=[SmartBulb_DTCE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_CTBR failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HKELVIN] not found, ndef=[SmartBulb_DTCE] parm=[K] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_HSB failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLHUE] not found, ndef=[SmartBulb_DTCE] parm=[H] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_BRI failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLBRI] not found, ndef=[SmartBulb_DTNE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) CLITEMP failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HKELVIN] not found, ndef=[SmartBulb_DTNE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_CTBR failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HKELVIN] not found, ndef=[SmartBulb_DTNE] parm=[K] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_BRI failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLBRI] not found, ndef=[SmartBulb_DNNE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) Memory: 250,444K Free: 105,583K (42%) ... completed. Memory: 250,444K Free: 102,857K (41%) ... completed. Memory: 250,444K Free: 99,210K (39%) ... completed. Memory: 250,444K Free: 98,942K (39%) ... completed. Memory: 250,444K Free: 98,798K (39%) ... completed. Memory: 250,444K Free: 98,467K (39%) ... completed. Memory: 250,444K Free: 96,110K (38%) ... completed. Memory: 250,444K Free: 94,683K (37%) ... completed. Memory: 256,572K Free: 149,188K (58%) ... completed. Memory: 256,572K Free: 147,666K (57%) ... completed. Memory: 256,572K Free: 154,429K (60%) ... completed. Memory: 256,572K Free: 154,130K (60%) ... completed. Memory: 256,572K Free: 153,554K (59%) ... completed. Memory: 256,572K Free: 152,998K (59%) ... completed. Memory: 256,572K Free: 152,856K (59%) ... completed. Memory: 256,572K Free: 152,161K (59%) ... completed. Memory: 256,572K Free: 152,087K (59%) ... completed. Memory: 256,572K Free: 151,958K (59%) ... completed. Memory: 256,572K Free: 151,812K (59%) ... completed. Memory: 256,572K Free: 151,675K (59%) ... completed. Memory: 256,572K Free: 151,604K (59%) ... completed. Memory: 256,572K Free: 151,530K (59%) ... completed. Memory: 256,572K Free: 150,834K (58%) ... completed. Memory: 256,572K Free: 150,690K (58%) ... completed. Memory: 256,572K Free: 150,515K (58%) ... completed. Memory: 256,572K Free: 150,443K (58%) ... completed. Memory: 256,572K Free: 150,128K (58%) ... completed. Memory: 256,572K Free: 150,053K (58%) ... completed. Memory: 256,572K Free: 148,818K (58%) ... completed. Memory: 256,572K Free: 148,674K (57%) ... completed. Memory: 256,572K Free: 148,596K (57%) ... completed. Memory: 256,572K Free: 148,466K (57%) ... completed. Memory: 256,572K Free: 148,394K (57%) ... completed. Memory: 256,572K Free: 93,228K (36%) ... completed. Memory: 256,572K Free: 93,001K (36%) ... completed. Memory: 256,572K Free: 92,789K (36%) ... completed. Memory: 256,572K Free: 91,870K (35%) ... completed. Memory: 256,572K Free: 91,664K (35%) ... completed. Memory: 256,572K Free: 87,558K (34%) ... completed. Memory: 256,572K Free: 86,932K (33%) ... completed. Memory: 256,572K Free: 86,798K (33%) ... completed. Memory: 256,572K Free: 85,537K (33%) ... completed. Memory: 256,572K Free: 85,403K (33%) ... completed. Memory: 256,572K Free: 85,329K (33%) ... completed. Memory: 256,572K Free: 84,855K (33%) ... completed. Memory: 256,572K Free: 154,878K (60%) ... completed. Memory: 256,572K Free: 153,385K (59%) ... completed. Memory: 256,572K Free: 151,884K (59%) ... completed. Memory: 256,572K Free: 151,619K (59%) ... completed. Memory: 256,572K Free: 151,474K (59%) ... completed. Memory: 256,572K Free: 151,000K (58%) ... completed. Memory: 256,572K Free: 149,150K (58%) ... completed. Memory: 256,572K Free: 148,772K (57%) ... completed. Memory: 256,572K Free: 148,630K (57%) ... completed. Memory: 256,572K Free: 148,555K (57%) ... completed. Memory: 256,572K Free: 148,419K (57%) ... completed. Memory: 256,572K Free: 148,344K (57%) ... completed. Memory: 256,572K Free: 148,166K (57%) ... completed. Memory: 256,572K Free: 148,024K (57%) ... completed. Memory: 256,572K Free: 147,948K (57%) ... completed. Memory: 256,572K Free: 147,811K (57%) ... completed. Memory: 256,572K Free: 147,627K (57%) ... completed. Memory: 256,572K Free: 147,490K (57%) ... completed. Memory: 256,572K Free: 147,414K (57%) ... completed. Memory: 256,572K Free: 147,339K (57%) ... completed. Memory: 256,572K Free: 143,644K (55%) ... completed. Memory: 256,572K Free: 142,929K (55%) ... completed. Memory: 256,572K Free: 142,692K (55%) ... completed. Memory: 256,572K Free: 142,610K (55%) ... completed. Memory: 256,572K Free: 142,469K (55%) ... completed. Memory: 256,572K Free: 135,880K (52%) ... completed. Memory: 256,572K Free: 135,698K (52%) ... completed. Memory: 256,572K Free: 135,457K (52%) ... completed.

Yes, I did that a few months ago and that did help back then but now it's gotten much worse. Can you go higher than 512? Would it help?