btreinders

What is an 1101 code? Polyglot devices? If so, yes, I have a lot of them.

Yes, both are 5.2.0. I do use the launcher.

I just counted and I have 246 programs disabled out of about 1300 programs total. Now not all of them would cause issues I suspect but I'd bet 200 of them would. That would mean 200 more variables to contend with and managing their initial states as well if the ISY reboots. One example I use a disabled program other than device toggling based on state of the device is to not trigger certain programs but do trigger other ones when a state variable changes. I run the if condition on the disabled programs based on other things. I have a variable called GUESTS and I set it manually or with a voice assistant like Alexa or Google Home when we have guests. I don't want it to execute some of the programs but do want it execute others when it changes. I could create a duplicate integer guests but again I have many of these types of situations and would need integer variables for a lot of them. Maybe I could use a state variable with different values too but that would take a lot of effort as well. Another example would be ceiling fan speeds, I adjust them based on outside temperatures and other conditions. I don't want them turning on every time the outside temp changes 1 degree since I might have turned them off manually. Could be taken care of with a new variable as well but more work and testing involved to get it right. I already have over 100 integer variables and 275 states ones to deal with. To me, changing all of that would take far longer than just dealing with the issue. Even though when the issue happens I have to hard reset the ISY and restore it. I just hope UDI can figure out what is causing it. I will submit a ticket. When this happens it is every single program that was disabled so I don't think it is something in the programming that could be triggering it. I finally wrote a program that if becomes enabled will try to stop the ISY from executing and notify me. It sets a variable that the top level ISY folder needs to be false to execute. Problem is that it is so overwhelmed it never get the notification to me and I just have to figure it out by seeing issues first. It at least lets me log in to the admin console to see what happened. Without it I cannot even do that and have to just guess that is what happened and hard reset.

It isn't happening during an upgrade, it is happening while the ISY is just running. In the past this was the best way to get UDI to address issues, I guess that has changed. I will submit a ticket. I am not enabling and disabling on he fly, I just have many programs that are disabled for many different reasons and using variables iMO would be far more complicated. For example, I have a light program that is disabled because the condition is if the light is on then turn it off and if it is off then turn it on. When it suddenly becomes enabled if cycles on and off continuously. When you have over 200 of those going on and off it crushes the ISY. Thank you for the replies.

@Michel Kohanim Any ideas? Third time now. Very frustrating.

This has happened twice in the last month. Running 5.2.0. The only way to recover is to restore the ISY. Anyone have any idea why this could happen? Thanks! @Michel Kohanim

What do you guys use for a spoken? Or am I missing something? To expose the state variable I have to give it a spoken. Am I doing this all wrong? Thanks!

I tried that several different times and tried a sync on just the lock, no change. Thanks!

When I upgraded to 5.2.0 and new 500 board and did a restore, all of my zwave devices were fine. The next day I saw a lot more devices (just additional functions I think for existing ones) and my Kwikset door lock had changed names and has no lock/unlock function anymore. Guess that happened during the overnight query? Anyone else have a Kwikset convert door lock that will not work anymore? Guess I will be going back to 5.0.16C for now, I have to have the door lock working.

Thanks, it had reset! I didn't realize you had to change every time. It is much better but still not 100%. I had noticed that it had slowed way down as well so I should have known.

I can always connect, it just pops up as I am using it or letting it sit idle. I checked the memory and it seems to cycle down to about 35% free and then back up to 60% or so and then repeats. Had a lot of failed to initialize errors starting up too. Java Web Start 11.241.2.07 Using JRE version 1.8.0_241-b07 Java HotSpot(TM) Client VM JRE expiration date: 5/17/20 12:00 AM console.user.home = C:\Users\Brent ---------------------------------------------------- ? clear console window f: finalize objects on finalization queue g: garbage collect h: display this help message m: print memory usage o: trigger logging p: reload proxy configuration q: hide console r: reload policy configuration s: dump system and deployment properties t: dump thread list v: dump thread stack 0-5: set trace level to <n> ---------------------------------------------------- addNodeDefs invalid entry ----<nodeDef ID="TEMPERATURE" NLS="TMP"> <sts> <st ID="ST" EDITOR="CTL_ST"/> <st ID="CLISPH" EDITOR="CTL_TEMP"/> <st ID="CLITEMP" EDITOR="CTL_TEMP"/> <st ID="CLISPH" EDITOR="CTL_TEMP" HIDE="T"/> <st ID="CLIMD" EDITOR="CTL_TEMP" HIDE="T"/> </sts> <cmds> <sends/> <accepts> <cmd ID="DON"/> <cmd ID="DOF"/> <cmd ID="SET_TEMP"> <p ID="" EDITOR="CTL_TEMP" INIT="CLISPH"/> </cmd> </accepts> </cmds> </nodeDef> ---- java.lang.IllegalArgumentException: U7DriverControl dup param [CLISPH] at com.universaldevices.u7.U7DriverControl.fail(Unknown Source) at com.universaldevices.u7.U7DriverControl.<init>(Unknown Source) at com.universaldevices.u7.U7DriverControl.newStatus(Unknown Source) at com.universaldevices.u7.U7NodeDef.<init>(Unknown Source) at com.universaldevices.u7.U7NodeDefs.addNodeDefs(Unknown Source) at com.universaldevices.u7.U7NodeDefs.addNodeDefs(Unknown Source) at com.universaldevices.u7.U7NodeDefs.addNodeDefs(Unknown Source) at com.universaldevices.uxt.UXTProfileDownloader.registerProfile(Unknown Source) at com.universaldevices.uxt.UXTProfileDownloader.loadAllProfiles(Unknown Source) at com.universaldevices.uxt.UXTNodeServerMgr.loadProfiles(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_BUTTON failed to initialize java.lang.IllegalArgumentException: [F10.I1] editor [Btn52751079] not found, ndef=[d52751079] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_ACTIVITY failed to initialize java.lang.IllegalArgumentException: [F10.I1] editor [ActDefault] not found, ndef=[HubDefault] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_BUTTON failed to initialize java.lang.IllegalArgumentException: [F10.I1] editor [BtnDefault] not found, ndef=[DeviceDefault] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_COLOR_RGB failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLRGB] not found, ndef=[SmartBulb_DTCE] parm=[R] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_COLOR_XY failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLXY] not found, ndef=[SmartBulb_DTCE] parm=[X] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_COLOR failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCSEL] not found, ndef=[SmartBulb_DTCE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_HUE failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLHUE] not found, ndef=[SmartBulb_DTCE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_SAT failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLSAT] not found, ndef=[SmartBulb_DTCE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_BRI failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLBRI] not found, ndef=[SmartBulb_DTCE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) CLITEMP failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HKELVIN] not found, ndef=[SmartBulb_DTCE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_CTBR failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HKELVIN] not found, ndef=[SmartBulb_DTCE] parm=[K] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_HSB failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLHUE] not found, ndef=[SmartBulb_DTCE] parm=[H] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_BRI failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLBRI] not found, ndef=[SmartBulb_DTNE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) CLITEMP failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HKELVIN] not found, ndef=[SmartBulb_DTNE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_CTBR failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HKELVIN] not found, ndef=[SmartBulb_DTNE] parm=[K] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) SET_BRI failed to initialize java.lang.IllegalArgumentException: [F10.I12] editor [HCLBRI] not found, ndef=[SmartBulb_DNNE] parm=[] at com.universaldevices.ui.u7.U7CmdParameterWidget.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParameterWidget.createVarsOptional(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.initComponents(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.U7CmdParametersPanel.createForCmdLink(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.init(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7CmdEditorPanel.createCmd(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkEditorsPanel.addLinkPanels(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.addNodeDef(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.init(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7LinkPanelMgr.<init>(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.startSpecific(Unknown Source) at com.universaldevices.ui.u7.links.U7GroupScenesView.createWidgets(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.prepareAuthenticatedSession(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.authenticate(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.onDeviceOnLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.onLine(Unknown Source) at com.universaldevices.upnp.UDControlPoint.updateDeviceInfo(Unknown Source) at com.universaldevices.upnp.UDControlPoint.addDevices(Unknown Source) at com.universaldevices.ui.UPnPClientApplet.start(Unknown Source) at com.universaldevices.ui.UDIDefaultLauncher$2.run(Unknown Source) Memory: 250,444K Free: 105,583K (42%) ... completed. Memory: 250,444K Free: 102,857K (41%) ... completed. Memory: 250,444K Free: 99,210K (39%) ... completed. Memory: 250,444K Free: 98,942K (39%) ... completed. Memory: 250,444K Free: 98,798K (39%) ... completed. Memory: 250,444K Free: 98,467K (39%) ... completed. Memory: 250,444K Free: 96,110K (38%) ... completed. Memory: 250,444K Free: 94,683K (37%) ... completed. Memory: 256,572K Free: 149,188K (58%) ... completed. Memory: 256,572K Free: 147,666K (57%) ... completed. Memory: 256,572K Free: 154,429K (60%) ... completed. Memory: 256,572K Free: 154,130K (60%) ... completed. Memory: 256,572K Free: 153,554K (59%) ... completed. Memory: 256,572K Free: 152,998K (59%) ... completed. Memory: 256,572K Free: 152,856K (59%) ... completed. Memory: 256,572K Free: 152,161K (59%) ... completed. Memory: 256,572K Free: 152,087K (59%) ... completed. Memory: 256,572K Free: 151,958K (59%) ... completed. Memory: 256,572K Free: 151,812K (59%) ... completed. Memory: 256,572K Free: 151,675K (59%) ... completed. Memory: 256,572K Free: 151,604K (59%) ... completed. Memory: 256,572K Free: 151,530K (59%) ... completed. Memory: 256,572K Free: 150,834K (58%) ... completed. Memory: 256,572K Free: 150,690K (58%) ... completed. Memory: 256,572K Free: 150,515K (58%) ... completed. Memory: 256,572K Free: 150,443K (58%) ... completed. Memory: 256,572K Free: 150,128K (58%) ... completed. Memory: 256,572K Free: 150,053K (58%) ... completed. Memory: 256,572K Free: 148,818K (58%) ... completed. Memory: 256,572K Free: 148,674K (57%) ... completed. Memory: 256,572K Free: 148,596K (57%) ... completed. Memory: 256,572K Free: 148,466K (57%) ... completed. Memory: 256,572K Free: 148,394K (57%) ... completed. Memory: 256,572K Free: 93,228K (36%) ... completed. Memory: 256,572K Free: 93,001K (36%) ... completed. Memory: 256,572K Free: 92,789K (36%) ... completed. Memory: 256,572K Free: 91,870K (35%) ... completed. Memory: 256,572K Free: 91,664K (35%) ... completed. Memory: 256,572K Free: 87,558K (34%) ... completed. Memory: 256,572K Free: 86,932K (33%) ... completed. Memory: 256,572K Free: 86,798K (33%) ... completed. Memory: 256,572K Free: 85,537K (33%) ... completed. Memory: 256,572K Free: 85,403K (33%) ... completed. Memory: 256,572K Free: 85,329K (33%) ... completed. Memory: 256,572K Free: 84,855K (33%) ... completed. Memory: 256,572K Free: 154,878K (60%) ... completed. Memory: 256,572K Free: 153,385K (59%) ... completed. Memory: 256,572K Free: 151,884K (59%) ... completed. Memory: 256,572K Free: 151,619K (59%) ... completed. Memory: 256,572K Free: 151,474K (59%) ... completed. Memory: 256,572K Free: 151,000K (58%) ... completed. Memory: 256,572K Free: 149,150K (58%) ... completed. Memory: 256,572K Free: 148,772K (57%) ... completed. Memory: 256,572K Free: 148,630K (57%) ... completed. Memory: 256,572K Free: 148,555K (57%) ... completed. Memory: 256,572K Free: 148,419K (57%) ... completed. Memory: 256,572K Free: 148,344K (57%) ... completed. Memory: 256,572K Free: 148,166K (57%) ... completed. Memory: 256,572K Free: 148,024K (57%) ... completed. Memory: 256,572K Free: 147,948K (57%) ... completed. Memory: 256,572K Free: 147,811K (57%) ... completed. Memory: 256,572K Free: 147,627K (57%) ... completed. Memory: 256,572K Free: 147,490K (57%) ... completed. Memory: 256,572K Free: 147,414K (57%) ... completed. Memory: 256,572K Free: 147,339K (57%) ... completed. Memory: 256,572K Free: 143,644K (55%) ... completed. Memory: 256,572K Free: 142,929K (55%) ... completed. Memory: 256,572K Free: 142,692K (55%) ... completed. Memory: 256,572K Free: 142,610K (55%) ... completed. Memory: 256,572K Free: 142,469K (55%) ... completed. Memory: 256,572K Free: 135,880K (52%) ... completed. Memory: 256,572K Free: 135,698K (52%) ... completed. Memory: 256,572K Free: 135,457K (52%) ... completed.

Yes, I did that a few months ago and that did help back then but now it's gotten much worse. Can you go higher than 512? Would it help?

I would say lately the login credentials window is popping up within 10-15 minutes while the AC is open. Sometimes within even 5 minutes. Any ideas why this might be happening? If I try to log back in it never completes either. I have to restart the AC. Thanks!

@bmercier Has the maintenance completed? It's noon central and the portal says my ISY is offline and I have rebooted it twice. No joy.

@Brian H Thanks! That did it. I didn't do that step because I had just done it on another card. I didn't realize the card contained the firmware. To me firmware is on an eprom.

Yes, through putty on the com port.

I think my SD card is failing because I had issues backing up (had to delete files to get them working)(thanks to @Michel Kohanim for fixing that issue a few weeks ago) but now the ISY has gone unresponsive twice so I thought I'd try a new SD card. I put it in and formatted it (16GB SanDisk Ulta 10 HCI) but when I try to restore my back up I get "reported file size invalid" error during the restore and it fails. Before the restore system status showed it could see the card and had the right amount of free space. I know the backup is good because I had to restore it to the original SD card earlier today when it went unresponsive and that worked. The SD card that works is a 32GB SanDisk 4 HC. Could this be a card speed issue? I tried another 32GB SanDisk 4 HC and got the same error so I don't really think that's the issue. Thanks!

Thanks! That did it. I had to delete another as well but it is backing up successfully now.

Not that I am aware of. It is doing the same between the two computers I have tried from. Edit: Jan 20 was the last java update and I have successful backups since then.

@Michel KohanimI am getting a zip file could not be created with another error "Could Not Retrieve File /CONF/NODES/UN0205.BIN while trying to backup. I am running 5.0.16B and have successfully created backups previously with this version. I see other issues that are similar in the forums but none with a .bin extension. My question is, can I safely delete it and try again like the other similar issues? Or do I just need to go back to a previous backup and restore? I have several changes that I'd like to keep but if going back is the only way then I'll do that. Thanks!

@kclenden Wow, I feel very stupid! I should have caught that. Thanks for the info! I really appreciate all the help in these forums!

@Michel Kohanim Precip Today - [ID 04A3][Parent 03E0] If 'OpenWeatherMap / OpenWeatherMap' Rain Today is not '$PRECIP_TODAY Inches' And 'OpenWeatherMap / OpenWeatherMap' Rain Today > '$PRECIP_TODAY Inches' Then $PRECIP_TODAY = 'OpenWeatherMap / OpenWeatherMap' Rain Today Inches Else $PRECIP_TODAY += 'OpenWeatherMap / OpenWeatherMap' Rain Today Inches

@Michel Kohanim Any ideas why this caused an infinite loop? @DaveStLou Thanks! I will definitely implement this!

@Michel Kohanim Yes, and I used it to get things back but was just wondering why it happened in the first place. Setting a += for a node server value shouldn't cause that should it?

@Michel Kohanim I do have Zwave but i added it to the ISY so I do have a PLM. I assume that will stop executing with the PLM unplugged or does just having Zwave let it execute with it unplugged? I definitely had an issue but I am not sure why. Under the else of a program I set a variable += to a node server rain today value and then to test it I ran the else. That is when it stopped responding. Even after a reboot it would not respond. Thanks!