jfai

All my hallways have motion sensors and the lights are controlled such that: · Switch on the lights when motion is detected and the area is dark (variable "Min_luminance_percent"). · Switch off the lights when no more motion is detected and the lights were on long enough. The duration is variable “Motion_light_number_of_5s_intervals_on” times five seconds. · Force the lights on with the wall switches - motion is ignored. · Force the lights off with the wall switches and ignore motion for some duration. The duration is variable “Motion_light_number_of_5s_intervals_off” times five seconds. Note the state "force off" in the attached FA diagram. I think you're trying to implement a similar use case. Let me know if you're interested and I will post the ISY programs that implement this state machine diagram. You should be able to modify the programs to suit your needs.

Also see https://wiki.universal-devices.com/index.php?title=Z-Wave:_Ordering/Assembly_Instructions.

Quick report regarding upgrading the Z-Wave dongle. There are 4 securely linked devices: 2x Zooz Smart Plug ZEN06 1x Zooz 4-in-1 sensor (ZSE40) - battery powered 1x Aeotec Multisensor 6 - USB powered First restore: only the ZSE40 of the four devices in the mesh were communicating; got many repeated Security Nonce RX events. I tried a few things based on my understanding of the log contents. Sync all didn’t help; network heal didn’t help. Eventually, I did a second Z-Wave>Tools>Restore which appears to have fixed the issues. All four devices are back to normal behavior as far as I can tell. Comm. range appears to be somewhat better - subjectively; didn’t capture any quantitative data. I'm using one of the ZEN06 plugs to check range - the ZEN06 have a feature to indicate the quality of the connection.