wrj0

My eisy upgrade to v5.8.4 went well and backups are indeed very fast. My backup file size went from 6400KB in v5.8.3 to 225KB n v5.8.4. Am I missing anything?

OK, thanks The Rest command for my camera: http://192.xxx.yyy.zzz:8080/rest/nodes/n004_1023646 returns: <nodeInfo> <node flag="0" nodeDefId="blinkcamera"> <address>n004_1023646</address> <name>BeachDeck</name> <family instance="4">10</family> <hint>0.0.0.0</hint> <parent type="1">n004_485001</parent> <type>0.0.0.0</type> <enabled>true</enabled> <deviceClass>0</deviceClass> <wattage>0</wattage> <dcPeriod>0</dcPeriod> <startDelay>0</startDelay> <endDelay>0</endDelay> <pnode>n004_485001</pnode> </node> <properties> <property id="GV0" value="0" formatted="0" uom="25" name="Motion Detection Status"/> <property id="GV1" value="0" formatted="0" uom="25" name="Battery Status"/> <property id="GV3" value="2" formatted="2" uom="25" name="CameraType"/> <property id="GV5" value="0" formatted="0" uom="25" name="Motion Detected"/> <property id="GV6" value="95" formatted="95°F" uom="17" name="Temperature"/> <property id="ST" value="98" formatted="98" uom="25" name="Connected"/> </properties> </nodeInfo> Wonder if property id="ST" would return the camera Connected state for the plugin?

Kudos to @Panda88 for solving the Blink authentication issue. It's great to once again have geofence enabling/disabling of camera motion detection. Well done! Question on one of the IoX camera fields, please. What does "No Support" mean in the Connected field below? One level above the camera, the plugin shows "Connected: Online"

Adding the key manually (case sensitive) with value ENABLED did the trick. All good now.

Tried refresh and restart a few times. Finally deleted the plugin, power cycled eisy, and reinstalled the plugin. Entered my Blink system username/password, and the plugin prompted for the 2FA, which was entered and saved. No ENABLED/DISABLED is available, either before or after restarting the plugin. And Nodes tab still shows Nodes 0. Other suggestions will be appreciated. Thanks.

@Panda88 Thanks for the update! I have 0.4.8 installed and entered the newly received 2FA code, saved, them restarted. I do see a message: "New Network detected BEACH - please select ENABLED or DISABLED - then restart." But, I don't see an entry for the New Network to be able to select ENABLED. Also, the Nodes tab shows "Nodes 0" What am I doing wrong?

Thanks. I'll add my hope to yours.

Thanks for the update. There's some info in this link about "The verification end point has changed" Adding the tier to the verify url solved the issue for one user in that thread. Wonder if that's any help?

Hi @Panda88 Any progress on getting the Blink plugin to authenticate?

2.0.8 is working fine. Though I did have to reset the default poll values from what I had previously saved. Many thanks, Bob.

I have a problem similar to @macjeff's initial post above. After performing an Update on Weatherbit plugin 2.0.6 and restarting the plugin, it continues to show 2.0.6. And, in the store, 2.0.7 is shown as available to install. I've tried the Install option in the store, and have selected Update from within the plugin dashboard.

Similar situation here; periodically getting the Blink notice about the verification code. Putting the code into the plugin as AUTH_KEY doesn't seem to help. Blink plugin Debug log shows: 2024-04-24 10:08:04,546 Thread-7 blinkpy.auth ERROR auth:query: Unable to access https://rest-u017.immedia-semi.com/api/v3/accounts/34xxxx/homescreen after token refresh. 2024-04-24 10:08:04,546 Thread-7 udi_interface INFO BlinkSystem:auth: Auth key required Not sure how to proceed to provide the required Auth key.

With excellent support from ttsMP3.com, some additional information on this issue has provided a simple to implement solution to the Bluetooth audio cutoff problem. MP3 files from freetts.com played fine over Bluetooth, while the files generated by ttsMP3.com were cut short before playing to completion. (As an example, entering "This is a test" would output "This is a" via Bluetooth audio) Support from ttsMP3.com determined that that freetts.com uses a sample rate of 16k, resulting in a lower quality output, than ttsMP3.com that provides 24k sample rate with crisper output sound. Additionally, freetts.com automatically adds a forced pause of 1 second at the end of the file. So, using ttsMP3.com, and adding the tag <break time="1s"/> at the end of your text input to ttsMP3.com to generate an MP3 file, that allows Bluetooth to play the custom MP3 file without cutting off the end.

Michel provided me with a solution to being able to play custom Text-to-Speech MP3 files via Bluetooth. Apparently, the TTS site I had been using (ttsmp3.com) does not provide the MP3 files with the proper frame rate. Per the ticket opened on this issue: I regenerated the desired MP3 files using this site: https://freetts.com/ So far, the custom MP3 files generated by that site are playing fine over both the Speaker and Bluetooth outputs.

Update to both Bluetooth and MediaPlayer were performed, as noted in the first post in this thread.

@Techman As noted in my previous post that was closed, my custom files DO have the "_t" at the end of file name, and play fine via the Speaker Output; just Bluetooth cuts them off before playing to the end.

Thanks @garybixler, Hopefully, this won't be a stubborn bug to squash.

My previous thread was marked as solved with an update to the Audio Player. However, after updating both AudioPlayer and Bluetooth plugins, I still have my custom MP3 files cut short when playing via Bluetooth. Same custom MP3 files play fine via the Speaker output. eisy was power cycled after the updates, and both plugins restarted. Currently running: udx-3.5.6_2 isy-5.8.0_1 pg3x-3.2.21 AudioPlayer 1.3.3 Bluetooth 1.0.4

Thanks. I hadn’t seen other comments on this being an issue.

I have connected two different Bluetooth devices to the Bluetooth plugin, and have a problem playing custom MP3 files. The AudioPlayer plugin plays the UD-provided built-in MP3 files fine via BT, but all of my custom MP3 files are cut short, much like before we needed to add _t at the end of the file name per this release notice. The same custom MP3 files play fine over the Speaker Jack Output. Do I need to postpend something other than "_t" to the custom MP3 files that I would like to play via Bluetooth? Currently running: udx-3.5.6 isy-5.8.0_1 pg3x-3.2.20 AudioPlayer 1.3.1 Bluetooth 1.0.3

@Techman There was a thread about adding custom MP3 files to the eisy a few weeks ago. Please see this link.

@dakall Here's one possible solution. Create Integer variables: $iSunrise, $iSunset, $iSolarNoon, $iSolarNoon.Hr, and $iSolarNoon.min (for last one, set precision to 2) Solar Noon Calc - [ID 00AB][Parent 0039][Not Enabled] If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then $iSunset = [Sunset Today (seconds)] $iSunrise = [Sunrise Today (seconds)] $iSolarNoon = $iSunset $iSolarNoon -= $iSunrise $iSolarNoon /= 2 $iSolarNoon += [Sunrise Today (seconds)] $iSolarNoon.Hr = $iSolarNoon $iSolarNoon.Hr /= 3600 $iSolarNoon.Min = $iSolarNoon.Hr $iSolarNoon.Min *= 3600 $iSolarNoon.Min -= $iSolarNoon $iSolarNoon.Min *= -1 $iSolarNoon.Min /= 60 Else - No Actions - (To add one, press 'Action') #Disabled Run manually Since SolarNoon.Hr is an integer, the line $iSolarNoon.hr /= 3600 returns the integer Hour portion of the SolarNoon time. Then that time is multiplied by 3600 to get that value in seconds that is subtracted from $iSolarNoon (in seconds), and then negated to provide a positive number. Finally, divide that value by 60 to get the SolarNoon.Min value (here a 2 decimal number). To use the values to actually do anything, likely State variables for current Hour and Minute would need to be created and updated programmatically, and those State variables tested against the $iSolarNoon.Hr and $iSolarNoon.Min values.

Same here. My custom MP3 files that are in /storage/sounds are cut short. One created from a text to MP3 program is 6kb in size, outputting "This is a test." Used to play fine before upgrading to the Pro plugin. Now just makes a fast burp. The files play fine in Windows Media Player.

Same here. Time, Sunrise and Sunset are correct today on both Polisy and eisy (2 different locations) running isy-5.8.0_1. Didn't check yesterday on the day DST changed.

@Michel Kohanim I did indeed do a reboot after the last update, and just did another Upgrade Packages and Reboot from the AC. All is well; /storage/sounds is in tact and your AudioPlayer is playing fine. Thanks.