awzulich

Stu All lights are LED, but I have not seen any line noise issues when running the scenes at other times. In fact, the whole house is LED. Sounds like I have a hotbed of line noise. Run Then - lights operated correctly. They turned on and off. I did not trigger the garage door, so it was closed throughout. Keeping the garage door open for more than 5 minutes is not an attractive option if we are leaving for the evening. Any suggestions how I can modify the program to get around this (assuming I can solve the other problem)? Thanks for all your input!!

I have a program where, if the garage door is opened at night, lights will go on, wait five minutes, then shut off. Here is the program as written: Garage sensor lites - [ID 0020][Parent 0001] If From Sunset - 20 minutes To Sunrise + 20 minutes (next day) And Control 'garage sensor-Sensor' is switched On Then Set Scene 'Sc Garage Lights' 100% Set Scene 'Sc Front Floods' 100% Set 'LR Desk Lamp' 100% Wait 5 minutes Set Scene 'Sc Front Floods' Off Set Scene 'Sc Garage Lights' Off Wait 5 minutes Set 'LR Desk Lamp' Off Else - No Actions - (To add one, press 'Action') Here's my problem. When the garage door opens at night, the lights go on as expected. However, they do not go off after 5 minutes, whether the garage door is closed or left open. Hopefully, I'm missing something simple. Using IO Linc 2450 v41 if that makes a difference. Thanks!!

Thanks, Xanthros .. I missed the parallel thread in my search.

Are there any plans for ISY to interface with Amazon Echo? I know Echo supports Insteon through the Insteon Hub.

Thanks Lee - The factory reset appears to have done the trick. I'm embarrassed I didn't think to do that first. Thanks again ...

Hi Everyone- Happy Holidays! I just received a #2450 I/O Linc (v2.3) for a garage sensor. I tried to add the device in the 994i, and received the message: New Device Error Cannot Determine Insteon Engine Device is connected to a magnetc switch on the Ground and Sense terminals. Also tried without switch connected. Any thoughts on what is going on, and how I can get the device linked?

I have been using the 99i since it was first introduced. It has performed flawlessly, and I do not anticipate any programming beyond its capability. Are there any compelling reasons to upgrade to the 994i, other than the fact that the 99i is no longer supported with upgrades? Merry Christmas, everyone!

It's 6.0.1289, but it's giving me problems ..

Avast must have come out with a new update. I once again have problems showing the status of the devices. When I shut Avast off, no problem. I have already made both changes mentioned in http://forum.universal-devices.com/viewtopic.php?f=27&t=6908. Anyone have a new solution?

Brian and Lee - The RL2s are indeed 2444A3 Ran it again with the access point adjacent to the ISY PLM. Once again failed. Here is the log as requested: Fri 11/11/2011 09:12:23 PM : Setting Time From NTP Fri 11/11/2011 09:12:30 PM : Setting Time From NTP Fri 11/11/2011 09:12:38 PM : Setting Time From NTP Fri 11/11/2011 09:12:45 PM : Setting Time From NTP Fri 11/11/2011 09:12:53 PM : Setting Time From NTP Fri 11/11/2011 09:13:00 PM : Setting Time From NTP Fri 11/11/2011 09:13:04 PM : ---- Initializing the linked devices ---- Fri 11/11/2011 09:13:04 PM : ---- All Linked Devices are now initialized ---- Fri 11/11/2011 09:13:04 PM : ---- Add remaining devices ---- Fri 11/11/2011 09:13:04 PM : [ 1C 24 A 1] Writing High Water Mark at Link 0 Fri 11/11/2011 09:13:04 PM : [1C 24 A 1 ] Using engine version i2 Fri 11/11/2011 09:13:04 PM : [iNST-ACK ] 02 62 1C.24.0A 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 (00) Fri 11/11/2011 09:13:07 PM : Setting Time From NTP Fri 11/11/2011 09:13:09 PM : [iNST-ACK ] 02 62 1C.24.0A 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 (00) Fri 11/11/2011 09:13:15 PM : Setting Time From NTP Fri 11/11/2011 09:13:17 PM : [iNST-ACK ] 02 62 1C.24.0A 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 (00) Fri 11/11/2011 09:13:21 PM : [ 1C 24 A 1] ** Not added ** Remove Device Links failed Fri 11/11/2011 09:13:21 PM : ---- All Remaining Device Added ---- Fri 11/11/2011 09:13:21 PM : [All ] Writing 0 bytes to devices Fri 11/11/2011 09:13:22 PM : Setting Time From NTP Fri 11/11/2011 09:13:30 PM : Setting Time From NTP Fri 11/11/2011 09:13:37 PM : Setting Time From NTP BTW, I tried this with three RL2s .. no joy Thanks for your help

Lee I have no dual band devices, but the RL2 is within 15 feet of three #2443 access points. Are the new dual band devices necessary for these to work?

I have a number of RL2 #2444A3 switches that will not be recognized by ISY. ISY99i v. 3.1.10 Set RL2 with blinking green LED ISY: Add new device Enter address, name and find 2444A3 in dropdown. Starts to process and I get the following error message Any help would be appreciated

I have a number of RL2 #2444A3 switches that will not be recognized by ISY. ISY99i v. 3.1.10 Set RL2 with blinking green LED ISY: Add new device Enter address, name and find 2444A3 in dropdown. Starts to process and I get the following error message Any help would be appreciated

I got it .. thanks for your help

I just installed a new Belkin N600DB router, and although the ISY 99i is connected via ethernet cable to the router, I am unable to access the 99i by either: the IP address 192.168.1.150/admin http://isy http://www.universal-devices.com/99i gives me a blank ISY admin console with no login screen I have not changed any of the default settings on the router because frankly, I would not know which ones to change - WPA enabled. No computer settings were changed, and I rebooted ISY. (never have seen a My Lighting icon on my Win7 computer, BTW) The ISY was working flawlessly before the old router crapped out yesterday. It has the most recent update. All other wireless connections to other devices are working. I could not find a Belkin router topic in the forum that seemed to help. I hate computers ..

Hi Rand - Linked with the set button and it went right through. Thanks for your help.

I have a switchlink dimmer v2.1 that I removed from one room and relocated in another. Rather than change the name, I deleted the switchlink from ISY 99i. When I try to add device back into the database by adding the address, I get the error message: Failed getting engine version reverting to i1. I am unable to add the switch. It worked 20 minutes ago. Any ideas?

Michel - Yes, all the devices except one are connected to one or more banks of CFLs. This may be my downfall, my house is full of 'em. All CFLs are off (as they were when I did it the first time), and a curious thing happened when I restored a single device: Select | Right Click | Restore Device and the ISY sequentially restored all the devices with green arrows. Is this a function of PRO? All but one restored in that pass, and the last one restored the second time around. For now, I guess I am good .. are there any other tests I should run? Should I think about getting rid of all the CFLs? I'm sorry I wasted a lot of your time - thank you so much for the assistance.

Hi Michel - I upgraded to PRO, and ran Restore Devices. PRO is very nice BTW, worth the upgrade. Six devices have green arrows after the run. Four are KPLs BR KPL - All buttons FR KPL - All buttons Kitchen KPL - All buttons Hallway KPL - All buttons Kitchen Sink Light Driveway Floods How do I resolve these? Do I try to restore each individually or is there another trick ..

When I go to: File | Restore ISY a dialog box opens, looking to upload a file. Should I be making a backup first, and then reload the backup? The latest backup I have is of v 2.7.0 before I loaded v 2.7.8. Is it because I do not have Pro? I thought I did .. the About screen shows ISY 99i (1020).

Michel - I understand .. I will upgrade to 2.7.8. Once I do, which diagnostics tool will generate the comm error list you described? I didn't find it in a forum search. Happy New Year

Michel/oberkc - I'll start making a list of the Request Failed Devices, though the one of greatest concern is the Request Fail on the PLM itself when I try to restore it. A big problem will be that I cannot pinpoint an exact date when I started having problems, as most of these devices have been programmed for almost two years. That will make it difficult to determine if I have appliances in the house which may be interfering with the PLM. Additional info: - The ISY and computer are both hard-wired via router - All scenes were set up via ISY - The KPL issue has been overcome by the global Request Fail and Device Mismatch issues - I'm running four Wireless access points and a 2406H Phase Coupler (too many?) Frustrating .. Happy New Year to all!!

Hi Michel - Sorry for the delay, we were out of town for the holidays. I still have a significant number of mismatches on just about every device, even after restoring the device. In many cases, I get the error message Request Failed when I try to restore the device. I also tried to restore the PLM. Got the same Request Failed about halfway through, though I now have more links in the PLM links table (160 - still too low). Clearly something is wrong .. Your thoughts on where I go from here would be appreciated.

I thought the PLM link number was really low too. I have had the PLM for almost two years, so I must have other devices not linked in the PLM. I will run the compare again

Hi Michel - Oops .. I guess that shows that I do not run diagnostics often. Being early AM didn't help.. Tools | Show PLM Link Table --> Count Before device restored - 87 After device restored - 97 Tools | Diagnostics | Show Device Link Table Before restored record mismatch - 3 ignore - 2 missing this record - 36 Restored device - I cannot resolve the record mismatches. They are still showing up. What does that signify? Buttons are now showing up in the event viewer Thanks for your help!!