MrBill

You need to use a program. Set the spoken up to activate the THEN or ELSE of a program, and have the program turn on the correct scene. First add 4 programs for high, med, low, and off. You can leave the IF blank, for High, Med, Low add a line to the THEN block to turn on the correct scene. For the off function add a line to the ELSE block to turn ON the OFF scene. Then in the portal spokens choose "Program" For the Alexa Category on the next dialog pick "switch". You need to add 4 of these... pointing to each of the 4 programs created above.

A tip for all.... Right click any program or folder and set "detailed" Status Icons. That way you can see at a glance if there is a folder condition above your program that is resolving to false. @Michel Kohanim Suggestion: can we just eliminate this choice and force "detailed" for all? Detailed is much more informative and I don't know why anyone that knows of this choice would choose either Folders Only or Simple.

A possible issue is how the light is controlled now. On mine the control is electronic with off, dim and bright settings. i just tried leaving it on high and unscrewing the bulb for a minute, when I put the bulb back, just as I expected the control had reverted to off. Another issue is the light over my stove light is a weird bulb, for which I doubt there is a smart replacement.

those are smartlabs pages however... they were linked from nokia.com. Nokia.com has wiped it's smarthome products from it's pages there.

Even if smarthome/smartlabs closes up shop... the technology will surly be up for sale. Like happened to X-10 (how many times?) someone will likely buy it and bring Insteon back to market. Corporate world doesn't flush assets down the toilet they instead will get what they can get on the investment. It actually could be a good thing in terms of pricing, a buyer that bought at a huge discount can bring the technology back to market at less cost, allowing it compete against lower priced products. I also visited nokia.com this morning... those smarhome pages seem to be gone too...

dead for me as well.

Keep in mind polyglot v2 is deprecated. You're building a short term solution, but it is a good way to discover node servers if you have hardware already.

Couldn't tell you how to run via windows, but let's tag @io_guy

Unless you have a dedicated windows machine running 24/7 for some other reason, the best bet is likely running it on a raspberry pi... more info here: http://automationshack.com/wp/nodelink/

Please be sure and circle back and let us know the outcome.? ---------------------------------------------------------------------------- Also when using the @ tagging/notify feature of the forum after you type the @ you see a popup list as you type @tlightne, example: either click or use the down arrow to turn the text into a tag. The automatic notification feature will only work if the plain text has been converted to a tag.

the Wiki page is here: https://wiki.universal-devices.com/index.php?title=ISY-994i_Series_INSTEON:Networking:Network_Resources also these substitution strings can be used in the body or path portion of URL for the network resource. as you scroll thru that page you'll discover not only the ability to include variables but any nodes info. I've not used the replacements in the path portion of the NR before but there might be a need to check or uncheck the encode checkbox to the right of the path entry box. @larryllix can probably tell use for sure, IIRC he's done that type of replacement extensively with his wifi bulbs.

You've got the IP correct because you used it for ssh. We've exhausted all standard troubleshooting. You should open a ticket support@universal-devices.com

ssh in and see if isy is running.... sudo service isy status If its not start it sudo service isy start if it is, try restarting it sudo service isy restart

I think you need to add the /desc when manually adding..... http://ip_addr:8080/desc also make certain you're replacing ip_addr with the actual IP address of Polisy.

that actually got an out loud laugh... First question... have you tried rebooted the ISY? Second... Check the error log for clues.

Network resources are one way traffic only. You can build your get string bases on variables, there are not currently string variables available although that may be coming in some form or another if I read another thread correctly. Number 2 on your list is not possible. Instead you need to create a node server.

I used a smartenit EZIO2X4 which in addition to the smoke alarms also monitors the front doorbell and has the capability of ringing the single chime "back" doorbell (which occurs when either back gate is opened). Another inexpensive method is just use an insteon open/close sensor. (since it's a battery device, be sure to set up a program to monitor the heartbeat as well. The easy method to eliminate the battery is search "AA battery Eliminator" on amazon-- just be aware those kits are sold based on the number of batteries the devices takes, which matches the voltage, there's only a few for a single AA battery (which is 1.5volts). Keep in mind, this is an imperfect auxiliary system that you're setting up. It will probably work when you need it to, BUT IT MIGHT NOT WORK CORRECTLY. Don't rely on it, it's not as good as a supervised wireless alarm. Either described method, has negatives. I had a smartenit that got damaged by lighting and I didn't realize it no longer worked until someone rang the doorbell after a couple weeks. Using a battery is problematic because it might die, etc. And finally Insteon is Insteon and while it works most of the time there's always the odd moment of data collision or weird line noise when something just doesn't turn off or on.

Indonesia Viet Nam Belarus Bangkok ---- Don't unblock them! do you use port forwarding? I'm not sure why these would be reaching polisy.....

Can you post some detail about the threats? Is there a log or block screen that tells us what its blocking? What does "Armor appears to dislike every WAN IP address that hits it- viewing them all as threats." mean, what WAN IP addresses are you referring to?

1) order a cable if you no longer have the one that came in the 2413s box 2) open a ticket support@universal-devices.com if you can’t boot your Polisy.

you're onto it.... he can't use the same cable he was using with the 994... and he doesn't know what a db9 port is...

PLM must be powered on first PLM must be plugged into polisy when it boots Insteon Support must be checked on Configuration tab.

Even more so now with the proliferation of smart bulbs that change color or color temp..... it's likely possible to implement a node server for the fanlinc request. Separating button A created another problem tho, when it's separated the switch gains a node to 9 (or 6, in the case of the 6-button which normally has 5 nodes).

The real issue here is the choice of colors for visited vs unvisited links in the wiki. Underline is a hover property in the wiki. On my screen is some cases it is harder to notice visited links.

I agree with @lilyoyo1 I doubt PG2 will receive a "shutdown".... there are many that have developed unpublished node servers specific to only them (or perhaps they don't feel they are polished enough to post in a store for others use, but they accomplish the needs of the developer... or perhaps they don't have the time it takes to provide public support for their nodesevers). For that reason I doubt you'll see a breaking change that shuts down PG2, but as parts break they won't be repaired.