Mark Sanctuary

Did you get this working? Can you post your programs on how you did it? Thanks,

I was wondering how you're doing with the intermittent issues... have you solved it yet? I have newer ones and they work fine. I think the weight change has to do with they changed the circuitry (guessing power supply circuits) so they don't have as many heavy components in them now plus they tend to be a bit cooler to the touch now too.

Your correct, program event loop is going to check this if statement at sunset and register a status even if the Away Flag is false. I think the best option is two separate programs if you don't want to do the folder option. Program Kitchen Lights Away On If Time is Sunset And Program 'Away Flag' is True Then Set 'Kitchen Pots' On Program Kitchen Lights Away Off If Time is 11:14:00PM And Program 'Away Flag' is True Then Set 'Kitchen Pots' Off Thanks,

That is the idea of the INSTEON modem chip that could be integrated into almost anything, but getting companies to by in and do it is anther thing. Thanks,

Outdoor ApplianceLinc Module says... 15 Amps; 1800 Watts (for incandescent loads) http://www.smarthome.com/2456S3E/Applia ... ule/p.aspx It must have a heavy duty relay inside. Thanks,

I have see this many times on their website... I think the website automatically shows about a 90 day wait at first when the product first sells out then someone over at Smarthome corrects it when they know the real date. This is a guess of course but it seems to behave this way. I usually give them another day or two and check again for the real number.

Also may I suggest you take a backup right after you re-add your devices.

You still need to run thru the wiki link for for getting the admin firmware back on your SD card so you don't have to use the website link. http://www.universal-devices.com/mwiki/ ... an_SD_Card As for restoring you say you don't have any backup of your system? I will have to defer to someone that has the knowledge of this process, but I think you may have to first factory reset your PLM and then do a "add devices and keeping links" on your KPLs to get most of your linking back. Because I don't recall if you can pull in the PLM database to the ISY or not.

Oh yeah that's right... Error + Memory LED blinking = Network Error I added a note to the Wiki page.

And if you can't telnet you can connect to it by the serial port, but this is for the worse case situations.

If you can telnet to the ISY then you can fix this issue. You can try out the new Wiki Page on formatting the SD card if you like. Also it may be a case of that the SD card is bad but first try the process in this Wiki. http://www.universal-devices.com/mwiki/ ... an_SD_Card

Sounds awesome! Can you post a couple pictures? If you need photo hosting we can upload them (less-than 2meg) to the Wiki if necessary. http://www.universal-devices.com/mwiki/ ... ial:Upload

Others can confirm me on this but I think its just a Receive only IR device. http://www.universal-devices.com/mwiki/ ... _ISY-99.9i There is the IRLinc TX that you can used too. http://www.smarthome.com/2411T/IRLinc-I ... ter/p.aspx

You could see if Smarthome is willing to send you one of the 2412S until they get the 2413S in stock at which point they could exchange it for the dual band then with charging the price diff of course.

I don't have an IOLinc but I would think its like the other devices where you would make a group and add the IO link node to be the controller. But others that have one of these devices might know better. Is this for a door bell or something like that? http://www.universal-devices.com/mwiki/ ... n_I/O_Linc Thanks,

That has to be a bogus date... have you called Smarthome to find out if this is correct?

I have the new dual band 2413S and it is working great! Thanks,

I don't know for sure but I don't think any of them have full editing capabilities yet. Using the native ISY Admin interface is so far the most flexible for editing.

Perfect that fixed it! Thanks Rand!

I would suggest you switch the ISY to a different HTTPS port. The standard port is 443 maybe use 444 instead. That way you can access both remotly over HTTPS. Wiki: Changing_HTTPS_Port_Number

I think that its part of the set command is what makes it confusing. Its not setting anything in the devices its just querying for their current status so the ISY is in sync with those devices. And in this example it will be querying only the ones in that scene. Thanks,

Thanks Michel! Now you have a page to point to instead of typing it in posts again and again. Thanks,

So let me ask is the device listed in the ISY My Lighting table? If it is not then its not linked to the ISY and you need to get that done first. Here is the wiki page about adding a device to the ISY... http://www.universal-devices.com/mwiki/ ... ement_Menu And then here is how to do a 3-way circuit with the ISY... http://www.universal-devices.com/mwiki/ ... ay_Circuit No you don't want to link them the Smarthome way, its better to first link your switches to the ISY then use it to create all the Scene links after that. Thanks,

Did you find the examples you where looking for? I would like to get my hands on some examples too so I can add them to the Wiki. Thanks,

I did not realize I had my email hidden, it should be visible now.