marvel Posted February 23, 2013 Share Posted February 23, 2013 Hello again, I have a program that isn't working as expected. I have an 8 button keypad in my bathroom; button A is connected to the keypad's relay, which turns my bathroom fan on & off. Button C (right under A), I want to use as a timer to turn A off. So here's the program: If Control 'Bathroom KP : C' is switched On Then Set 'Bathroom KP : A' On Wait 15 minutes Set 'Bathroom KP : A' Off Set 'Bathroom KP : C' Off Else - No Actions - Simple enough. The timer works, turns the fan on and shuts it off after 15 minutes, but button C doesn't turn back off when it's done. Any thoughts? I tried reversing the order of the last two items, setting C off first; A still turns off and C doesn't. I tried the same program on a different keypad that's controlling another bathroom fan and had the same results, so I don't think there's a problem with the keypad itself. Thank you for your help! Link to comment
LeeG Posted February 23, 2013 Share Posted February 23, 2013 Secondary KPL buttons cannot be controlled with Direct commands. Assign button C as a Responder in an ISY Scene. Turn the Scene Off. Link to comment
marvel Posted February 25, 2013 Author Share Posted February 25, 2013 Ah ha. OK, thank you! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.